379 research outputs found
Variable Selection and Model Averaging in Semiparametric Overdispersed Generalized Linear Models
We express the mean and variance terms in a double exponential regression
model as additive functions of the predictors and use Bayesian variable
selection to determine which predictors enter the model, and whether they enter
linearly or flexibly. When the variance term is null we obtain a generalized
additive model, which becomes a generalized linear model if the predictors
enter the mean linearly. The model is estimated using Markov chain Monte Carlo
simulation and the methodology is illustrated using real and simulated data
sets.Comment: 8 graphs 35 page
Conserved spin and orbital phase along carbon nanotubes connected with multiple ferromagnetic contacts
We report on spin dependent transport measurements in carbon nanotubes based
multi-terminal circuits. We observe a gate-controlled spin signal in non-local
voltages and an anomalous conductance spin signal, which reveal that both the
spin and the orbital phase can be conserved along carbon nanotubes with
multiple ferromagnetic contacts. This paves the way for spintronics devices
exploiting both these quantum mechanical degrees of freedom on the same
footing.Comment: 8 pages - minor differences with published versio
Nanospintronics with carbon nanotubes
One of the actual challenges of spintronics is the realization of a
spin-transistor allowing to control spin transport through an electrostatic
gate. In this review, we report on different experiments which demonstrate a
gate control of spin transport in a carbon nanotube connected to ferromagnetic
leads. We also discuss some theoretical approaches which can be used to analyze
spin transport in these systems. We emphasize the roles of the gate-tunable
quasi-bound states inside the nanotube and the coherent spin-dependent
scattering at the interfaces between the nanotube and its ferromagnetic
contacts.Comment: 35 pages, 15 figures, some figures in gi
Evidence for a Peierls phase-transition in a three-dimensional multiple charge-density waves solid
The effect of dimensionality on materials properties has become strikingly
evident with the recent discovery of graphene. Charge ordering phenomena can be
induced in one dimension by periodic distortions of a material's crystal
structure, termed Peierls ordering transition. Charge-density waves can also be
induced in solids by strong Coulomb repulsion between carriers, and at the
extreme limit, Wigner predicted that crystallization itself can be induced in
an electrons gas in free space close to the absolute zero of temperature.
Similar phenomena are observed also in higher dimensions, but the microscopic
description of the corresponding phase transition is often controversial, and
remains an open field of research for fundamental physics. Here, we photoinduce
the melting of the charge ordering in a complex three-dimensional solid and
monitor the consequent charge redistribution by probing the optical response
over a broad spectral range with ultrashort laser pulses. Although the
photoinduced electronic temperature far exceeds the critical value, the
charge-density wave is preserved until the lattice is sufficiently distorted to
induce the phase transition. Combining this result with it ab initio}
electronic structure calculations, we identified the Peierls origin of multiple
charge-density waves in a three-dimensional system for the first time.Comment: Accepted for publication in Proc. Natl. Acad. Sci. US
Translation, cross-cultural adaptation, and validation of the Italian version of the anterior cruciate ligament–return to sport after injury (ACL-RSI) scale and its integration into the K-STARTS test
Background: The timing of a return to sport (RTS) after anterior cruciate ligament reconstruction (ACLR) represents a major subject of debate in sports medicine practice. Recently, the Knee Santy Athletic Return to Sport (K‐STARTS) composite test was validated. This consists of a battery of physical tests and a psychological evaluation using the anterior cruciate ligament–return to sport after injury scale (ACL‐RSI). This study aimed to translate the ACL‐RSI and K‐STARTS from English to Italian and determine the scale’s reliability and validity in an Italian context.
Methods: The translation and cultural adaptation process was performed according to the guidelines for the cross‐ cultural adaptation of self‐report measures. The patients were asked to fill an anonymized online form created for this purpose that included the KOOS, the Lysholm, the IKDC‐SKF, and the Italian translation of the ACL‐RSI (ACL‐RSI‐It). After 1 week, the attendees were asked to repeat the ACL‐RSI‐It to investigate the test–retest reliability.
Results: The final study population comprised 115 patients who underwent ACLR, with a mean follow‐up of 37.37 ± 26.56 months. The ACL‐RSI‐It showed axcellent internal consistency (Cronbach’s α = 0.963), reliability (test– retest ICC = 0.966), and good construct validity (positive correlations with the other scales were above 75%).
Conclusions: The ACL‐RSI‐It is valid, reliable, and comparable to the original English version of the questionnaire for Italian‐speaking patients. It can be used to assess the psychological readiness of patients for a RTS after primary and unilateral ACLR, and can be integrated into the Italian K‐STARTS test
Anterolateral ligament reconstruction does not delay functional recovery, rehabilitation, and return to sport after anterior cruciate ligament reconstruction. A matched-pair analysis from the SANTI (Scientific ACL Network International) Study Group
Purpose: To determine whether the addition of an anterolateral ligament reconstruction (ALLR) resulted in delayed functional recovery (based on the Knee Santy Athletic Return to Sport [K-STARTS] score) at 6 months after anterior cruciate ligament reconstruction (ACLR). Methods: A retrospective analysis of prospectively collected data from consecutive pa- tients who underwent an ACLR between September 2017 and December 2020 was conducted. Patients who received an isolated hamstring autograft (isolated ACLR group) were propensity matched in a 1:1 ratio to patients who received a hamstring autograft ACLR combined with an ALLR (ACLR-ALLR group). Outcome measures included the Tegner Activity Scale and the K-STARTS testda validated composite return-to-sports test (including the Anterior Cruciate LigamenteReturn to Sport After Injury scale, Qualitative Assessment of Single-Leg Landing tool, limb symmetry index, and ability to change direction using the Modified Illinois Change of Direction Test). Results: The study included 111 matched pairs. At 6 months postoperatively, there were no significant differences between groups in the overall K-STARTS score (65.4 for isolated ACLR vs 61.2 for ACLR-ALLR, P 1⁄4 .087) or the Tegner Activity Scale score (3.7 for isolated ACLR vs 3.8 for ACLR-ALLR, P 1⁄4 .45). In addition, an evaluation of the subscales of the K-STARTS score revealed no disadvantage across the domains of neuromuscular control, limb symmetry index, agility, or psychological readiness to return to sport when an ALLR was performed. Conclusions: The addition of ALLR at the time of ACLR does not delay functional recovery. Spe- cifically, at 6 months postoperatively, there was no disadvantage in patients undergoing ALLR-ACLR, when compared with those undergoing isolated ACLR, with respect to neuromuscular control, limb symmetry indices (hop tests), agility, or psychological readiness to return to sport
Coupling a quantum dot, fermionic leads and a microwave cavity on-chip
We demonstrate a hybrid architecture consisting of a quantum dot circuit
coupled to a single mode of the electromagnetic field. We use single wall
carbon nanotube based circuits inserted in superconducting microwave cavities.
By probing the nanotube-dot using a dispersive read-out in the Coulomb blockade
and the Kondo regime, we determine an electron-photon coupling strength which
should enable circuit QED experiments with more complex quantum dot circuits.Comment: 4 pages, 4 figure
Electric Field Control of Spin Transport
Spintronics is an approach to electronics in which the spin of the electrons
is exploited to control the electric resistance R of devices. One basic
building block is the spin-valve, which is formed if two ferromagnetic
electrodes are separated by a thin tunneling barrier. In such devices, R
depends on the orientation of the magnetisation of the electrodes. It is
usually larger in the antiparallel than in the parallel configuration. The
relative difference of R, the so-called magneto-resistance (MR), is then
positive. Common devices, such as the giant magneto-resistance sensor used in
reading heads of hard disks, are based on this phenomenon. The MR may become
anomalous (negative), if the transmission probability of electrons through the
device is spin or energy dependent. This offers a route to the realisation of
gate-tunable MR devices, because transmission probabilities can readily be
tuned in many devices with an electrical gate signal. Such devices have,
however, been elusive so far. We report here on a pronounced gate-field
controlled MR in devices made from carbon nanotubes with ferromagnetic
contacts. Both the amplitude and the sign of the MR are tunable with the gate
voltage in a predictable manner. We emphasise that this spin-field effect is
not restricted to carbon nanotubes but constitutes a generic effect which can
in principle be exploited in all resonant tunneling devices.Comment: 22 pages, 5 figure
Optimizing end-labeled free-solution electrophoresis by increasing the hydrodynamic friction of the drag-tag
We study the electrophoretic separation of polyelectrolytes of varying
lengths by means of end-labeled free-solution electrophoresis (ELFSE). A
coarse-grained molecular dynamics simulation model, using full electrostatic
interactions and a mesoscopic Lattice Boltzmann fluid to account for
hydrodynamic interactions, is used to characterize the drag coefficients of
different label types: linear and branched polymeric labels, as well as
transiently bound micelles.
It is specifically shown that the label's drag coefficient is determined by
its hydrodynamic size, and that the drag per label monomer is largest for
linear labels. However, the addition of side chains to a linear label offers
the possibility to increase the hydrodynamic size, and therefore the label
efficiency, without having to increase the linear length of the label, thereby
simplifying synthesis. The third class of labels investigated, transiently
bound micelles, seems very promising for the usage in ELFSE, as they provide a
significant higher hydrodynamic drag than the other label types.
The results are compared to theoretical predictions, and we investigate how
the efficiency of the ELFSE method can be improved by using smartly designed
drag-tags.Comment: 32 pages, 11 figures, submitted to Macromolecule
- …