Benefits of VTOL aircraft in offshore petroleum logistics support

The mission suitability and potential economic benefits of advanced VTOL aircraft were investigated for logistics support of petroleum operations in the North Sea and the Gulf of Mexico. Concepts such as the tilt rotor and lift/cruise fan are promising for future operations beyond 150 miles offshore, where their high cruise efficiency provides savings in trip time, fuel consumption, and capital investment. Depending upon mission requirements, the aircraft operating costs are reduced by as much as 20 percent to 50 percent from those of current helicopters

A possible correlation between maxima of the far ultraviolet solar irradiance and central meridian passages of solar magnetic sector boundaries

Satellite observations of the sun over almost 5 yrs show that principally two UV active longitudes have persisted over a significant portion of this observational period. A comparison between the position of solar magnetic sector boundaries and UV enhancements of the sun seems to show, at least during the year 1969, that the UV maxima tend to occur near the times when a solar sector boundary is near central meridian. An estimate of the magnitude of the variable UV solar energy input into the atmosphere resulting from the rotation of active solar longitudes is that for wavelengths less than 175 nm and down to H Lyman-alpha it exceeds the annual variation, whereas at longer wavelengths it is less

Progress in turbulence modeling for complex flow fields including effects of compressibility

Two second-order-closure turbulence models were devised that are suitable for predicting properties of complex turbulent flow fields in both incompressible and compressible fluids. One model is of the "two-equation" variety in which closure is accomplished by introducing an eddy viscosity which depends on both a turbulent mixing energy and a dissipation rate per unit energy, that is, a specific dissipation rate. The other model is a "Reynolds stress equation" (RSE) formulation in which all components of the Reynolds stress tensor and turbulent heat-flux vector are computed directly and are scaled by the specific dissipation rate. Computations based on these models are compared with measurements for the following flow fields: (a) low speed, high Reynolds number channel flows with plane strain or uniform shear; (b) equilibrium turbulent boundary layers with and without pressure gradients or effects of compressibility; and (c) flow over a convex surface with and without a pressure gradient

Movie of the interplanetary magnetic field

Description of movie representing IMP-1 MAGNETOMETER observations of interplanetary magnetic fiel

Interplanetary magnetic field IMP-1, motion picture of the transverse components

Motion picture report of IMP-1 magnetometer observations of interplanetary magnetic fiel

A preliminary analysis of the data from experiment 77-13 and final report on glass fining experiments in zero gravity

Thermal fining, thermal migration of bubbles under reduced gravity conditions, and data to verify current theoretical models of bubble location and temperatures as a function of time are discussed. A sample, sodium borate glass, was tested during 5 to 6 minutes of zero gravity during rocket flight. The test cell contained a heater strip; thermocouples were in the sample. At present quantitative data are insufficient to confirm results of theoretical calculations

Computational Fluid Dynamic Studies of Vortex Amplifier Design for the Nuclear Industry—II. Transient Conditions

In this paper computational fluid dynamics (CFD) techniques have been used to investigate the effect of changes to the geometry of a vortex amplifier (VXA) in the context of glovebox operations in the nuclear industry. These investigations were required because of anomalous behavior identified when, for operational reasons, a long-established VXA design was reduced in scale. The study simulates the transient aspects of two effects: back-flow into the glovebox through the VXA supply ports, and the precessing vortex core in the amplifier outlet. A temporal convergence error study indicates that there is little to be gained from reducing the time step duration below 0.1 ms. Based upon this criterion, the results of the simulation show that the percentage imbalance in the domain was well below the required figure of 1, and imbalances for momentum in all three axes were all below measurable values. Furthermore, there was no conclusive evidence of periodicity in the flow perturbations at the glovebox boundary, although good evidence of periodicity in the device itself and in the outlet pipe was seen. Under all conditions the modified geometry performed better than the control geometry with regard to aggregate reversed supply flow. The control geometry exhibited aggregate nonaxisymmetric supply port back-flow for almost all of the simulated period, unlike the alternative geometry for which the flow through the supply ports was positive, although still nonaxisymmetric, for most of the period. The simulations show how transient flow structures in the supply ports can cause flow to be reversed in individual ports, whereas aggregate flow through the device remains positive. Similar to the supply ports, flow through the outlet of the VXA under high swirl conditions is also nonaxisymmetric. A time-dependent reverse flow region was observed in both the outlet and the diffuser. It is possible that small vortices in the outlet, coupled with the larger vortex in the chamber, are responsible for the oscillations, which cause the shift in the axis of the precessing vortex core (and ultimately in the variations of mass flow in the individual supply ports). Field trials show that the modified geometry reduces the back-flow of oxygen into the glovebox by as much as 78. At purge rates of 0.65 m 3h the modified geometry was found to be less effective, the rate of leakage from the VXA increasing by 16-20. Despite this reduced performance, leakage from the modified geometry was still 63 less than the control geometry. © 2012 American Society of Mechanical Engineers

Ethanol Plant Location Determinants and County Comparative Advantage

The location of ethanol plants is determined by infrastructure, product and input markets, fiscal attributes of local communities, and state and federal incentives. This empirical analysis uses probit regression along with spatial clustering methods to analyze investment activity of ethanol plants at the county level for the lower U.S. 48 states from 2000 to 2007. The availability of feedstock dominates the site selection decision. Other factors, such as access to navigable rivers or railroads, product markets, producer credit and excise tax exemptions, and methyl tertiary-butyl ether bans provided some counties with a comparative advantage in attracting ethanol plants.cluster analysis, comparative advantage, ethanol production, location model, Community/Rural/Urban Development, Environmental Economics and Policy, Political Economy, R1, R3,

Comparison of the mean photospheric magnetic field and the interplanetary magnetic field

Polarity comparison of solar magnetic field and interplanetary magnetic fiel

The polarizability of the pion: no conflict between dispersion theory and chiral perturbation theory

Recent attempts to determine the pion polarizability by dispersion relations yield values that disagree with the predictions of chiral perturbation theory. These dispersion relations are based on specific forms for the absorptive part of the Compton amplitudes. The analytic properties of these forms are examined, and the strong enhancement of intermediate-meson contributions is shown to be connected with spurious singularities. If the basic requirements of dispersion relations are taken into account, the results of dispersion theory and effective field theory are not inconsistent.Comment: 30 pages, 8 figures, 6 table