149 research outputs found

    Optimal control of motorsport differentials

    Get PDF
    Modern motorsport limited slip differentials (LSD) have evolved to become highly adjustable, allowing the torque bias that they generate to be tuned in the corner entry, apex and corner exit phases of typical on-track manoeuvres. The task of finding the optimal torque bias profile under such varied vehicle conditions is complex. This paper presents a nonlinear optimal control method which is used to find the minimum time optimal torque bias profile through a lane change manoeuvre. The results are compared to traditional open and fully locked differential strategies, in addition to considering related vehicle stability and agility metrics. An investigation into how the optimal torque bias profile changes with reduced track-tyre friction is also included in the analysis. The optimal LSD profile was shown to give a performance gain over its locked differential counterpart in key areas of the manoeuvre where a quick direction change is required. The methodology proposed can be used to find both optimal passive LSD characteristics and as the basis of a semi-active LSD control algorithm

    Septic hip abscess due to Fusobacterium nucleatum and Actinomyces turicensis in an immunocompetent SARS-CoV-2 positive patient

    Get PDF
    A 42-year-old man was referred to the Department of Orthopedic Surgery with pain over his right greater trochanter and signs of systemic infection. CT showed an enhanced mass in his gluteus maximus as well as gas in the biceps femoris over the underlying hip joint. Tissue biopsy yielded Fusobacterium nucleatum and Actinomyces turicensis. The patient was successfully treated for 6 weeks with amoxicillin/clavulanic acid 875mg/125mg and metronidazole 500mg

    Antimicrobial Efficacy of the Silver Wound Dressing Biatain Ag in a Disc Carrier Test Simulating Wound Secretion

    Get PDF
    Aim: The efficacy of antimicrobial compounds included in wound dressings has been determined using the quantitative suspension test according to EN 13727 before. However, as suspension tests are not an accurate reflection of the conditions under which wound antiseptics are used, it was investigated if a disc carrier test would yield results simulating practical conditions on wound surfaces. A silver-leaching foam wound dressing was used for evaluation of the disc carrier test method. Method: The disc carriers consisted of circular stainless-steel discs measuring 2 cm in diameter and 1.5 mm in thickness, complying with the requirements of EN 10088-2. Carriers were contaminated with Staphylococcus aureus, methicillin-resistant S. aureus or Pseudomonas aeruginosa, respectively, together with an artificial wound secretion and left to dry at room temperature for 30 min. The wound dressings being tested were placed on the discs for the length of the exposure time, and after neutralization by thioglycolate in phosphate-buffered saline the number of surviving test organisms was then counted. The logarithmic reduction factor was calculated from the difference between the initial inoculum and the number of recovered test organisms. Results: The disc carrier test allowed determination of an antimicrobial efficacy in a realistic setting. It also imposed more stringent requirements on efficacy over time than the quantitative suspension test. The silver foam wound dressing showed a time-dependent antimicrobial efficacy. After 24-hour application time, the reduction factors against S. aureus, P. aeruginosa and the methicillin-resistant S. aureus were 1.9 ± 0.15, 2.1 ± 0.14 and 3.1 ± 0.18, respectively. Conclusion: The disc carrier test was a useful method for testing the antimicrobial efficacy of a foam silver dressing. The antimicrobial dressing exhibited an antimicrobial effect after 3 h and achieved a reduction >2 log against the tested bacterial strains in the presence of a simulated wound secretion after 24 h

    Cold atmospheric pressure plasma for treatment of chronic wounds: drug or medical device?

    Get PDF
    Objective: The use of cold atmospheric pressure plasma (CAPP) as a new therapeutic option to aid the healing of chronic wounds appears promising. Currently, uncertainty exists regarding their classification as medical device or medical drug. Because the classification of CAPP has medical, legal, and economic consequences as well as implications for the level of preclinical and clinical testing, the correct classification is not an academic exercise, but an ethical need. Method: A multidisciplinary team of physicians, surgeons, pharmacists, physicists and lawyers has analysed the physical and technical characteristics as well as legal conditions of the biological action of CAPP. Results: It was concluded that the mode of action of the locally generated CAPP, with its main active components being different radicals, is pharmacological and not physical in nature. Conclusion: Depending on the intended use, CAPP should be classified as a drug, which is generated by use of a medical device directly at the point of therapeutic application

    Endowashers: an overlooked risk for possible post-endoscopic infections

    Get PDF
    Background: Prevention of post-endoscopy infections is an important objective to assure patient safety. Endowashers, or high throughput irrigation water pumps, are a frequently used device on endoscopes. Recommendations published by professional bodies and regulatory health agencies cover not only adequate reprocessing of fiber-endoscopes but also state accepted methods of regular microbial sampling. Although major instruments like endoscopes are covered by these recommendations, other devices used as optional add-ons for endoscopes are not included

    Prevention of post-operative infections after surgical treatment of bite wounds

    Get PDF
    After reviewing the literature about the microbial spectrum, the risk factors of post-operative infections, and the results of surgical interventions, the following recommendation can be made for the management of bite wounds

    Recommendations and requirements for soap and hand rub dispensers in healthcare facilities

    Get PDF
    Hand hygiene is one of the most important measures to prevent transmission of infectious agents and plays a major role in prevention of infection in any type of healthcare setting. While requirements for the efficacy of hand disinfectants are defined in European testing norms such as the EN 1500 for hygienic hand disinfection or EN 12791 for surgical hand preparation, no specific recommendations for hand rub dispensers and liquid soap dispensers have been given yet. Therefore, the intention of the present recommendation on soap and hand rub dispensers in healthcare facilities is to close this gap and to enhance future improvement of dispenser functionality and design. Regardless of manufacture and design of a hand rub or liquid soap dispensers the following requirements shall be met in healthcare facilities

    Hand antisepsis without decreasing efficacy by shortening the rub-in time of alcohol-based handrubs to 15 seconds

    Get PDF
    BackgroundA previous study among neonatal intensive care unit (NICU) nurses showed that the antibacterial efficacy of alcohol-based handrubs (ABHR) can be achieved in 15 s instead of 30 s with a significant increase in the frequency of hand antisepsis. This study aimed to examine 15-s vs 30-s antisepsis performance by measuring microbial load on fingertips and compliance among nurses in a low-risk gynaecological ward.MethodsAn independent trained observer monitored the frequency and compliance with hand antisepsis during shifts in a crossover design. Fingertips including thumbs were rinsed in soy broth before hand rubbing at the beginning of a shift and then hourly to determine the bacterial load. Performance activity was assigned to the contamination class of the Fulkerson scale. Immediately before the lunch break, volunteers cleaned their hands for a randomly determined application time of 15 or 30 s.ResultsExamination of bacterial load on fingertips revealed no difference between 15 vs 30 s application time. Controlled hand antisepsis before the lunch break also showed no difference in efficacy for either test series. Participants rubbing for 15 s were more likely to perform hand antisepsis compared with those rubbing for 30 s ( P=0.2). The compliance increased from 54.7% to 69.5% in the 15-s trial.DiscussionShortening the duration for hand antisepsis did not decrease efficacy. Shortening the application time to 15 s should be considered within the critical components of a successful multimodal intervention strategy to improve hand-hygiene compliance in clinical practice
    • …
    corecore