2,396 research outputs found
The Level 0 Pixel Trigger System for the ALICE experiment
The ALICE Silicon Pixel Detector contains 1200 readout chips. Fast-OR signals indicate the presence of at least one hit in the 8192 pixel matrix of each chip. The 1200 bits are transmitted every 100 ns on 120 data readout optical links using the G-Link protocol. The Pixel Trigger System extracts and processes them to deliver an input signal to the Level 0 trigger processor targeting a latency of 800 ns. The system is modular and based on FPGA devices. The architecture allows the user to define and implement various trigger algorithms. The system uses advanced 12-channel parallel optical fiber modules operating at 1310 nm as optical receivers. Multi-channel G-Link receivers were realized in programmable hardware and tested. The design of the system and the progress of the ALICE Pixel Trigger project are described in this paper
The pixel Fast-OR signal for the ALICE trigger in p-p collisions
The silicon pixel detector of the ALICE experiment at LHC comprises the two innermost layers of the inner tracking system of the apparatus. It contains 1200 readout chips, each of them corresponding to a 8192 pixel matrix. The single chip outputs a digital Fast-OR signal which is active whenever at least one of the pixels in the matrix records a hit. The 1200 Fast-OR output signals can be used to implement a unique triggering capability: few details on the pixel trigger system and some of the possible applications for p-p collisions are presented
Fractal-based autonomous partial discharge pattern recognition method for MV motors
On-line partial discharge (PD) monitoring is being increasingly adopted to improve the asset management and maintenance of medium-voltage (MV) motors. This study presents a novel method for autonomous analysis and classification of motor PD patterns in situations where a phase-reference voltage waveform is not available. The main contributions include a polar PD (PPD) pattern and a fractal theory-based autonomous PD recognition method. PPD pattern that is applied to convert the traditional phase-resolved PD pattern into a circular form addresses the lack of phase information in on-line PD monitoring system. The fractal theory is then presented in detail to address the task of discrimination of 6 kinds of single source and 15 kinds of multi-source PD patterns related to motors, as outlined in IEC 60034. The classification of known and unknown defects is calculated by a method known as centre score. Validation of the proposed method is demonstrated using data from laboratory experiments on three typical PD geometries. This study also discusses the application of the proposed techniques with 24 sets of on-site PD measurement data from 4 motors in 2 nuclear power stations. The results show that the proposed method performs effectively in recognising not only the single-source PD but also multi-source PDs
The ALICE Silicon Pixel Detector Control system and online calibration tools
The ALICE Silicon Pixel Detector (SPD) contains nearly 107 hybrid pixel cells. The operation of the SPD requires online control and monitoring of some 2000 parameters and » 50000DACs. Information for each channel is stored in a configuration database. Timing and data management (» 6GB of raw data each calibration) are critical issues. An overview of the SPD electronics read out chain and of the detector control system is given with a detailed description of the front-end controls and the calibration strategy. The status of commissioning and a preliminary evaluation of detector performance are presented
DC Inclined-Plane Tracking and Erosion Test of Insulating Materials
The paper reviews previous work on the DC inclined plane test and suggests equivalent DC voltage levels in parallel to AC voltage in the ASTM inclined plane tracking and erosion test. The aim of this work is to provide a basis for standardizing the inclined plane test for DC voltage. Round robin tests done in five laboratories on five specimens of a silicone rubber material were done with the purpose of establishing appropriate ratios by which the equivalent DC voltages can be determined with respect to the corresponding AC voltages. These levels were determined as 67% and 87%, for +DC and-DC respectively, of the AC initial tracking voltage, and for practical purposes, these levels are rounded to 70 and 90%.Peer reviewed: YesNRC publication: Ye
Performance of ALICE pixel prototypes in high energy beams
The two innermost layers of the ALICE inner tracking system are instrumented
with silicon pixel detectors. Single chip assembly prototypes of the ALICE
pixels have been tested in high energy particle beams at the CERN SPS.
Detection efficiency and spatial precision have been studied as a function of
the threshold and the track incidence angle. The experimental method, data
analysis and main results are presented.Comment: 10 pages, 9 figures, contribution to PIX2005 Workshop, Bonn
(Germany), 5-8 September 200
Measurement of D-meson production at mid-rapidity in pp collisions at √s=7 TeV
The production cross sections for prompt charmed mesons D0, D+, D∗+ and D+s were measured at mid-rapidity in proton–proton collisions at a centre-of-mass energy √s=7 TeV with the ALICE detector at the Large Hadron Collider (LHC). D mesons were reconstructed from their decays D0→K−π+, D+→K−π+π+, D∗+→D0π+, D+s→ϕπ+→K−K+π+, and their charge conjugates.With respect to previous measurements in the same rapidity region, the coverage in transverse momentum (pT) is extended and the uncertainties are reduced by a factor of about two. The accuracy on the estimated total ccbar production cross section is likewise improved. The measured pT-differential cross sections are compared with the results of three perturbative QCD calculations.<br/
The ALICE silicon pixel detector read-out electronics
The ALICE silicon pixel detector (SPD) constitutes the two innermost layers of the ALICE inner tracker system. The SPD contains 10 million pixels segmented in 120 detector modules (half staves), which are connected to the offdetector electronics with bidirectional optical links. Raw data from the on-detector electronics are sent to 20 FPGA-based processor cards (Routers) each carrying three 2-channel linkreceiver daughter-cards. The routers process the data and send them to the ALICE DAQ system via the ALICE detector data link (DDL). The SPD control, configuration and data monitoring is performed via the VME interface of the routers. This paper describes the detector readout and control via the off-detector electronics
- …