100 research outputs found
Laser ion acceleration using a solid target coupled with a low density layer
We investigate by particle-in-cell simulations in two and three dimensions
the laser-plasma interaction and the proton acceleration in multilayer targets
where a low density "near-critical" layer of a few micron thickness is added on
the illuminated side of a thin, high density layer. This target design can be
obtained by depositing a "foam" layer on a thin metallic foil. The presence of
the near-critical plasma strongly increases both the conversion efficiency and
the energy of electrons and leads to enhanced acceleration of proton from a
rear side layer via the Target Normal Sheath Acceleration mechanism. The
electrons of the foam are strongly accelerated in the forward direction and
propagate on the rear side of the target building up a high electric field with
a relatively flat longitudinal profile. In these conditions the maximum proton
energy is up to three times higher than in the case of the bare solid target.Comment: 9 pages, 11 figures. Submitted to Physical Review
Particle acceleration and radiation friction effects in the filamentation instability of pair plasmas
The evolution of the filamentation instability produced by two
counter-streaming pair plasmas is studied with particle-in-cell (PIC)
simulations in both one (1D) and two (2D) spatial dimensions. Radiation
friction effects on particles are taken into account. After an exponential
growth of both the magnetic field and the current density, a nonlinear
quasi-stationary phase sets up characterized by filaments of opposite currents.
During the nonlinear stage, a strong broadening of the particle energy spectrum
occurs accompanied by the formation of a peak at twice their initial energy. A
simple theory of the peak formation is presented. The presence of radiative
losses does not change the dynamics of the instability but affects the
structure of the particle spectra.Comment: 8 pages, 8 figures, submitted to MNRA
Solving Nonlinear Systems of Equations Via Spectral Residual Methods: Stepsize Selection and Applications
Spectral residual methods are derivative-free and low-cost per iteration procedures for solving nonlinear systems of equations. They are generally coupled with a nonmonotone linesearch strategy and compare well with Newton-based methods for large nonlinear systems and sequences of nonlinear systems. The residual vector is used as the search direction and choosing the steplength has a crucial impact on the performance. In this work we address both theoretically and experimentally the steplength selection and provide results on a real application such as a rolling contact problem
Reconstructing Late Quaternary Paleovalley Systems of Italy Through mHVSR: A Tool for Seismic Hazard Assessment in Modern Coastal Lowlands
Effective site characterization in highly urbanized coastal lowlands requires accurate stratigraphic and geophysical investigations. In these regions, which typically host shallowly buried paleovalley systems formed in response to Quaternary glacio-eustatic fluctuations, the marked lithologic contrast between soft sediment paleovalley fills and the adjacent, stiff substrate has the potential to modify earthquake motions, and assessment of critical parameters, such as shear wave velocities (VS) and resonance frequencies (f), should be coupled with detailed stratigraphic architecture. To evaluate the potential of the microtremor horizontal-to-vertical spectral ratio (mHVSR) for paleovalley recognition and mapping, we performed mHVSR measurements along the Adriatic coastal plain of Italy, where two paleovalley systems (Pescara and Manfredonia) have been recently identified. In both areas, we detected rapid lateral variations in resonance frequencies and highlighted laterally continuous impedance contrasts. Relying on a robust stratigraphic framework, we carefully evaluated the relation between geological and geophysical data and identified the stratigraphic surfaces responsible for the observed resonances. We derived VS models for the sediment fill, reconstructing the geometry of the two buried paleovalleys. We address the importance of evaluating the geological context when designing microzonation studies, for a reliable interpretation of changes in resonance frequencies.When earthquakes occur, buildings shake differently based on several factors, including seismic wave velocity, natural resonance frequencies, and local geological characteristics. Beneath modern coastal lowlands, the presence of paleovalley systems can significantly modify the ground motion. Identification of these buried bodies is therefore essential to assess and reduce seismic hazard. Paleovalleys are shallow incisions formed under periods of fluvial erosion in response to Quaternary climate fluctuations, and subsequently filled with very soft clay. These bodies are found worldwide, and do not have any geomorphological evidence, making their recognition challenging. Geologists typically use expensive sediment core analysis to identify paleovalleys, but this method can only provide spotty information. Geophysical exploration techniques that rely on microtremors (small vibrations on the Earth) can complement mapping of these buried bodies. In this work, we tested this technique in Pescara and Mafredonia (Adriatic coastal plain, Italy), providing dense information about paleovalley geometries and geophysical parameters crucial for predicting how the ground will shake during an earthquake. This study also highlights the importance of integrating disciplines to improve our understanding of subsoil and to design future studies to mitigate seismic hazards.Paleovalley fills are key sediment bodies made up of soft clay, tens of m thick and few km wide, buried beneath coastal lowlands worldwideMicrotremor-based paleovalley profiles and stratigraphic cross-sections exhibit strong similarityMicrotremor can provide shear wave velocities and resonance frequencies of paleovalleys, key parameters for seismic hazard mitigatio
Polarization Dependence of Bulk Ion Acceleration from Ultrathin Foils Irradiated by High-Intensity Ultrashort Laser Pulses
The acceleration of ions from ultrathin (10-100 nm) carbon foils has been investigated using intense (∼ 6 x1020 Wcm-2), ultrashort (45 fs) laser pulses, highlighting a strong dependence of the ion beam parameters on the laser polarization, with circularly polarized (CP) pulses producing the highest energies for both protons and carbons (25-30 MeV/nucleon); carbon ion energies obtained employing CP pulses were signicantly higher (∼2.5 times) than for irradiations employing linearly polarized (LP) pulses. Particle-in-cell simulations indicate that Radiation Pressure Acceleration becomes the dominant mechanism for the thinnest targets and CP pulses
Evidence of resonant surface wave excitation in the relativistic regime through measurements of proton acceleration from grating targets
The interaction of laser pulses with thin grating targets, having a periodic
groove at the irradiated surface, has been experimentally investigated.
Ultrahigh contrast () pulses allowed to demonstrate an enhanced
laser-target coupling for the first time in the relativistic regime of
ultra-high intensity >10^{19} \mbox{W/cm}^{2}. A maximum increase by a factor
of 2.5 of the cut-off energy of protons produced by Target Normal Sheath
Acceleration has been observed with respect to plane targets, around the
incidence angle expected for resonant excitation of surface waves. A
significant enhancement is also observed for small angles of incidence, out of
resonance.Comment: 5 pages, 5 figures, 2nd version implements final correction
Evaluation of tsunamigenic hazard through numerical modeling from seismic and non-seismic sources in the Crotone offshore (Calabria, Southern Italy)
Tsunamis in the Mediterranean Sea can be considered among the major sources of hazard, both for the extension of the area that can be involved by the water impact and for the closeness of potential sources to the coast, which reduces dramatically the alert and evacuation time. Moreover, landslides, as other non-seismic tsunami sources, are often characterized by a lack of precursors (such as seismic shaking), a reason for which the ensuing waves are sometimes called “surprise tsunamis”
Development of foam-based layered targets for laser-driven ion beam production
We report on the development of foam-based double-layer targets (DLTs) for laser-driven ion acceleration. Foam layers with a density of a few mg cm-3 and controlled thickness in the 8-36 μm range were grown on μm-thick Al foils by pulsed laser deposition (PLD). The DLTs were experimentally investigated by varying the pulse intensity, laser polarisation and target properties. Comparing DLTs with simple Al foils, we observed a systematic enhancement of the maximum and average energies and number of accelerated ions. Maximum energies up to 30 MeV for protons and 130 MeV for C6+ ions were detected. Dedicated three-dimensional particle-in-cell (3D-PIC) simulations were performed considering both uniform and cluster-assembled foams to interpret the effect of the foam nanostructure on the acceleration process
The FORUM end-to-end simulator project: architecture and results
FORUM (Far-infrared Outgoing Radiation Understanding and Monitoring) will fly as the ninth ESA's Earth Explorer mission, and an end-to-end simulator (E2ES) has been developed as a support tool for the mission selection process and the subsequent development phases. The current status of the FORUM E2ES project is presented together with the characterization of the capabilities of a full physics retrieval code applied to FORUM data. We show how the instrument characteristics and the observed scene conditions impact on the spectrum measured by the instrument, accounting for the main sources of error related to the entire acquisition process, and the consequences on the retrieval algorithm. Both homogeneous and heterogeneous case studies are simulated in clear and cloudy conditions, validating the E2ES against appropriate well-established correlative codes. The performed tests show that the performance of the retrieval algorithm is compliant with the project requirements both in clear and cloudy conditions. The far-infrared (FIR) part of the FORUM spectrum is shown to be sensitive to surface emissivity, in dry atmospheric conditions, and to cirrus clouds, resulting in improved performance of the retrieval algorithm in these conditions. The retrieval errors increase with increasing the scene heterogeneity, both in terms of surface characteristics and in terms of fractional cloud cover of the scene
Electron Acceleration by Relativistic Surface Plasmons in Laser-Grating Interaction
The generation of energetic electron bunches by the interaction of a short, ultraintense (I>1019 W/cm2) laser pulse with "grating" targets has been investigated in a regime of ultrahigh pulse-to-prepulse contrast (1012). For incidence angles close to the resonant condition for surface plasmon excitation, a strong electron emission was observed within a narrow cone along the target surface, with energy spectra peaking at 5-8 MeV and total charge of ∼100 pC. Both the energy and the number of emitted electrons were strongly enhanced with respect to simple flat targets. The experimental data are closely reproduced by three-dimensional particle-in-cell simulations, which provide evidence for the generation of relativistic surface plasmons and for their role in driving the acceleration process. Besides the possible applications of the scheme as a compact, ultrashort source of MeV electrons, these results are a step forward in the development of high-field plasmonics
- …