Reconfiguring experimental archaeology using 3D reconstruction

Experimental archaeology has long yielded valuable insights into the tools and techniques that featured in past peoples’ relationship with the material world around them. We can determine, for example, how many trees would need to be felled to construct a large round-house of the southern British Iron Age (over one hundred), infer the exact angle needed to strike a flint core in order to knap an arrowhead in the manner of a Neolithic hunter-gatherer, or recreate the precise environmental conditions needed to store grain in underground silos over the winter months, with only the technologies and materials available to Romano-Briton villagers (see Coles 1973; Reynolds 1993). However, experimental archaeology has, hitherto, confined itself to rather rigid, empirical and quantitative questions such as those posed in these examples. This is quite understandable, and in line with good scientific practice, which stipulates that any ‘experiment’ must be based on replicable data, and be reproducible. Despite their potential in this area however, it is notable that digital reconstruction technologies have yet to play a significant role in experimental archaeology. Whilst many excellent examples of digital 3D reconstruction of heritage sites exist (for example the Digital Roman Forum project: http://dlib.etc.ucla.edu/projects/Forum) most, if not all, of these are characterized by a drive to establish a photorealistic re-creation of physical features. This paper will discuss possibilities that lie beyond straightforward positivist re-creation of heritage sites, in the experimental reconstruction of intangible heritage. Between 2010 and 2012, the authors led the Motion in Place Platform project (MiPP: http://www.motioninplace.org/), a capital grant under the AHRC's DEDEFI scheme developing motion capture and analysis tools for exploring how people move through spaces. In the course of MiPP, a series of experiments were conducted using motion capture hardware and software at the Silchester Roman town archaeological excavation in Hampshire, and at the Butser Ancient Farm facility, where Romano-British and Iron Age dwellings have been constructed according to the best experimental practice. As well as reconstructing such Roman and early British dwellings in 3D, the authors were able to use motion capture to reconstruct the kind of activities that – according to the material evidence – are likely to have been carried out by the occupants who used them. Bespoke motion capture suits developed for the project were employed, and the traces captured and rendered with a combination of Autodesk and Unity3D software. This sheds new light on how the reconstructed spaces - and, by inference, their ancient counterparts - were most likely to have been used. In particular the exercises allowed the evaluation and visualisation of changes in behaviour which occur as a result of familiarity with an environment and the acquisition of expertise over time; and to assess how interaction between different actors affects how everyday tasks are carried out

Hand performance assessment of ten people with Rheumatoid Arthritis when using a range of specified saucepans

Purpose: The aim of the pilot study was to provide information about the design and use of saucepan handles to enable clinicians and designers to specify and provide products that are more appropriate for use by people with Rheumatoid Arthritis (RA). The objectives were: to evaluate aspects of new handle design for saucepans in terms of their ease of use for people with RA; document hand grip strength and configuration (grip patterns); record relevant anthropometric data to aid the development of new designs and perform an assessment of lifting techniques used in conjunction with perceived optimum handle configuration. Method/Results: Observation and video footage show that subjects continued to use familiar, but damaging, ways of lifting the saucepan even after extensive joint protection training by occupational therapists. Grip strengths recorded using a sphygmomanometer were similar to those found by other studies. The anthropometric measurements taken from the sample group were found to be within available anthropometric surveys of able-bodied people. However, hand length within the sample group with RA was longer than the equivalent in surveys of able-bodied subjects. Conclusions: Subjects preferred the narrower handles with some surface texture to the larger and more rounded tapered handles. Large handled saucepans were found not to be viable due to the constraints of UK cooking hob sizes and existing British Standards relating to saucepan specification

Evaluating the structure and magnitude of the ash plume during the initial phase of the 2010 Eyjafjallajökull eruption using lidar observations and NAME simulations

The Eyjafjallajökull volcano in Iceland erupted explosively on 14 April 2010, emitting a plume of ash into the atmosphere. The ash was transported from Iceland toward Europe where mostly cloud-free skies allowed ground-based lidars at Chilbolton in England and Leipzig in Germany to estimate the mass concentration in the ash cloud as it passed overhead. The UK Met Office's Numerical Atmospheric-dispersion Modeling Environment (NAME) has been used to simulate the evolution of the ash cloud from the Eyjafjallajökull volcano during the initial phase of the ash emissions, 14–16 April 2010. NAME captures the timing and sloped structure of the ash layer observed over Leipzig, close to the central axis of the ash cloud. Relatively small errors in the ash cloud position, probably caused by the cumulative effect of errors in the driving meteorology en route, result in a timing error at distances far from the central axis of the ash cloud. Taking the timing error into account, NAME is able to capture the sloped ash layer over the UK. Comparison of the lidar observations and NAME simulations has allowed an estimation of the plume height time series to be made. It is necessary to include in the model input the large variations in plume height in order to accurately predict the ash cloud structure at long range. Quantitative comparison with the mass concentrations at Leipzig and Chilbolton suggest that around 3% of the total emitted mass is transported as far as these sites by small (<100 μm diameter) ash particles

Polyrotaxane-based thin film composite membranes for enhanced nanofiltration performance

© 2020 An urgent need exists for the development of advanced water purification technologies to meet the increasing global demand being placed on freshwater resources. Membrane-based separation technologies for size-selective contaminant removal represent a promising approach to achieve this goal. Here, a novel thin film composite nanofiltration membrane is prepared via interfacial polymerization of α-cyclodextrin on a commercially available polyacrylonitrile substrate. Subsequent in-situ inclusion complexation of alkyne-functionalized poly(ethylene glycol) (PEG) is then used to tune the polyrotaxane-based pores for size-dependent filtration. The resultant membrane shows excellent size-selective rejection rates for organic dye (e.g. rhodamine B, >99%) as well as heavy-metal ions (e.g. Co(II), >90%), while crucially maintaining high water permeance (e.g. H2O: 7.1 L h−1 m−2 bar−1). The facile and straightforward synthetic approach to the fabrication of polyrotaxane nanofiltration membranes, combined with their strong nanofiltration separation performance, holds significant promise for membrane-based water purification applications

Electroreduction of CO2/CO to C2 products: process modeling, downstream separation, system integration, and economic analysis.

Direct electrochemical reduction of CO2 to C2 products such as ethylene is more efficient in alkaline media, but it suffers from parasitic loss of reactants due to (bi)carbonate formation. A two-step process where the CO2 is first electrochemically reduced to CO and subsequently converted to desired C2 products has the potential to overcome the limitations posed by direct CO2 electroreduction. In this study, we investigated the technical and economic feasibility of the direct and indirect CO2 conversion routes to C2 products. For the indirect route, CO2 to CO conversion in a high temperature solid oxide electrolysis cell (SOEC) or a low temperature electrolyzer has been considered. The product distribution, conversion, selectivities, current densities, and cell potentials are different for both CO2 conversion routes, which affects the downstream processing and the economics. A detailed process design and techno-economic analysis of both CO2 conversion pathways are presented, which includes CO2 capture, CO2 (and CO) conversion, CO2 (and CO) recycling, and product separation. Our economic analysis shows that both conversion routes are not profitable under the base case scenario, but the economics can be improved significantly by reducing the cell voltage, the capital cost of the electrolyzers, and the electricity price. For both routes, a cell voltage of 2.5 V, a capital cost of $10,000/m2, and an electricity price of <$20/MWh will yield a positive net present value and payback times of less than 15 years. Overall, the high temperature (SOEC-based) two-step conversion process has a greater potential for scale-up than the direct electrochemical conversion route. Strategies for integrating the electrochemical CO2/CO conversion process into the existing gas and oil infrastructure are outlined. Current barriers for industrialization of CO2 electrolyzers and possible solutions are discussed as well

A randomised controlled study of the effectiveness of breathing retraining exercises taught by a physiotherapist either by instructional DVD or in face-to-face sessions in the management of asthma in adults.

BACKGROUND: Asthma control is suboptimal, resulting in quality of life (QoL) impairment and costs. Breathing retraining exercises have evidence of effectiveness as adjuvant treatment, but are infrequently used. OBJECTIVES: To transfer the contents of a brief (three-session) physiotherapist-delivered breathing retraining programme to a digital versatile disc (DVD) and booklet format; to compare the effectiveness of the self-guided intervention with that of 'face-to-face' physiotherapy and usual care for QoL and other asthma-related outcomes; to perform a health economic assessment of both interventions; and to perform a process evaluation using quantitative and qualitative methods. DESIGN: Parallel-group three-arm randomised controlled trial. SETTING: General practice surgeries in the UK. PARTICIPANTS: In total, 655 adults currently receiving asthma treatment with impaired asthma-related QoL were randomly allocated to the DVD (n = 261), physiotherapist (n = 132) and control (usual care) (n = 262) arms in a 2 : 1 : 2 ratio. It was not possible to blind participants but data collection and analysis were performed blinded. INTERVENTIONS: Physiotherapy-based breathing retraining delivered through three 'face-to-face' respiratory physiotherapist sessions or a self-guided programme (DVD plus our theory-based behaviour change booklet) developed by the research team, with a control of usual care. MAIN OUTCOME MEASURES: The primary outcome measure was asthma-specific QoL, measured using the Asthma Quality of Life Questionnaire (AQLQ). Secondary outcomes included asthma symptom control [Asthma Control Questionnaire (ACQ)], psychological state [Hospital Anxiety and Depression Scale (HADS)], hyperventilation symptoms (Nijmegen questionnaire), generic QoL [EuroQol-5 Dimensions (EQ-5D)], assessments of airway physiology (spirometry) and inflammation (exhaled nitric oxide) and health resource use and costs. Assessments were carried out at baseline and at 3, 6 and 12 months post randomisation. Patient engagement and experience were also assessed using quantitative and qualitative methods. RESULTS: Primary efficacy analysis was between-group comparison of changes in AQLQ scores from baseline to 12 months in the intention-to-treat population with adjustments for prespecified covariates. Significant improvements occurred in the DVD group compared with the control group [adjusted mean difference 0.28, 95% confidence interval (CI) 0.11 to 0.44; p < 0.001] and in the face-to-face physiotherapy group compared with the control group (adjusted mean difference 0.24, 95% CI 0.04 to 0.44; p < 0.05), with equivalence between the DVD and the face-to-face physiotherapy groups (adjusted mean difference 0.04, 95% CI -0.16 to 0.24). In all sensitivity analyses, both interventions remained significantly superior to the control and equivalence between the interventions was maintained. In other questionnaire outcome measures and in the physiological measures assessed, there were no significant between-group differences. Process evaluations showed that participants engaged well with both of the active interventions, but that some participants in the DVD arm would have liked to receive tuition from a professional. Asthma health-care costs were lower in both intervention arms than in the control group, indicating 'dominance' for both of the interventions compared with the control, with lowest costs in the DVD arm. The rate of adverse events was lower in the DVD and face-to-face physiotherapy groups than in the control group. CONCLUSIONS: Only 10% of the potentially eligible population responded to the study invitation. However, breathing retraining exercises improved QoL and reduced health-care costs in adults with asthma whose condition remains uncontrolled despite standard pharmacological therapy, were engaged with well by patients and can be delivered effectively as a self-guided intervention. The intervention should now be transferred to an internet-based platform and implementation studies performed. Interventions for younger patients should be developed and trialled. TRIAL REGISTRATION: Current Controlled Trials ISRCTN88318003. FUNDING: This project was primarily funded by the NIHR Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 21, No. 53. See the NIHR Journals Library website for further project information. Additional financial support was received from Comprehensive Local Research Networks

Unconscious bias and the medical model: How the social model may hold the key to transformative thinking about disability discrimination

This article seeks to gain access to a new way to engage with disability discrimination and the legal approaches to it by focusing on the two central models: the medical and social models. It discusses how the law has based the definition of disability on the medical model and suggests that this may strengthen some of the underlying factors that contribute to segregation and discrimination of disabled people. This article argues that the law should now switch focus to the social model, in an attempt to transform people’s attitudes towards disabled people and become a positive force to reduce discrimination. It makes reference to the reasonable adjustment duty contained in sections 20 and 21 Equality Act 2010, the Framework Directive and by way of comparison the American with Disabilities Act 1990. Relevant critical theories are integrated as a means to explore the conception and the hierarchy that exist between able-bodied individuals and disabled individuals