158 research outputs found
Compliant actuation based on dielectric elastomers for a force-feedback device: modeling and experimental evaluation
Thanks to their large power densities, low costs and shock-insensitivity, Dielectric Elastomers (DE)seem to be a promising technology for the implementation of light and compact force-feedback devices such as,for instance, haptic interfaces. Nonetheless, the development of these kinds of DE-based systems is not trivialowing to the relevant dissipative phenomena that affect the DE when subjected to rapidly changingdeformations. In this context, the present paper addresses the development of a force feedback controller foran agonist-antagonist linear actuator composed of a couple of conically-shaped DE films and a compliantmechanism behaving as a negative-rate bias spring. The actuator is firstly modeled accounting for the viscohyperelasticnature of the DE material. The model is then linearized and employed for the design of a forcecontroller. The controller employs a position sensor, which determines the actuator configuration, and a forcesensor, which measures the interaction force that the actuator exchanges with the environment. In addition, anoptimum full-state observer is also implemented, which enables both accurate estimation of the time-dependentbehavior of the elastomeric material and adequate suppression of the sensor measurement noise. Preliminaryexperimental results are provided to validate the proposed actuator-controller architectur
Selective Deuterium Ion Acceleration Using the Vulcan PW Laser
We report on the successful demonstration of selective acceleration of
deuterium ions by target-normal sheath acceleration (TNSA) with a high-energy
petawatt laser. TNSA typically produces a multi-species ion beam that
originates from the intrinsic hydrocarbon and water vapor contaminants on the
target surface. Using the method first developed by Morrison, et al., an
ion beam with 99 deuterium ions and peak energy 14 MeV/nucleon is
produced with a 200 J, 700 fs, laser pulse by cryogenically
freezing heavy water (DO) vapor onto the rear surface of the target prior
to the shot. Within the range of our detectors (0-8.5), we find
laser-to-deuterium-ion energy conversion efficiency of 4.3 above 0.7
MeV/nucleon while a conservative estimate of the total beam gives a conversion
efficiency of 9.4.Comment: 5 pages, 5 figure
Environmental Impact of Meals: How Big Is the Carbon Footprint in the School Canteens?
The inhabitants of the world are expected to grow by two billion in the next two decades; as population increases, food demand rises too, leading to more intensive resource exploitation and greater negative externalities related to food production. In this paper the environmental impact of meals provided in school canteens are analysed through the Life Cycle Assessment methodology, in order to evaluate the GHGs emissions released by food production. Meals, and not just individual foods, have been considered so as to include in the analysis the nutritional aspects on which meals are based. Results shows that meat, fish and dairy products are the most impacting in terms of greenhouse gas emissions, with values that shift from 31.7 and 24.1 kg CO2 eq for butter and veal, to 2.37 kg CO2 eq for the octopus, while vegetables, legumes, fruit and cereals are less carbon intensive (average of 3.71 kg CO2 eq for the considered vegetables). When the environmental impact is related to the food energy, the best option are first courses because they combine a low carbon footprint with a high energy content. The results of the work can be used both by the consumer, who can base the meal choice on environmental impact information, and by food services, who can adjust menus to achieve a more sustainable production
Evidence of resonant surface wave excitation in the relativistic regime through measurements of proton acceleration from grating targets
The interaction of laser pulses with thin grating targets, having a periodic
groove at the irradiated surface, has been experimentally investigated.
Ultrahigh contrast () pulses allowed to demonstrate an enhanced
laser-target coupling for the first time in the relativistic regime of
ultra-high intensity >10^{19} \mbox{W/cm}^{2}. A maximum increase by a factor
of 2.5 of the cut-off energy of protons produced by Target Normal Sheath
Acceleration has been observed with respect to plane targets, around the
incidence angle expected for resonant excitation of surface waves. A
significant enhancement is also observed for small angles of incidence, out of
resonance.Comment: 5 pages, 5 figures, 2nd version implements final correction
Characterisation of deuterium spectra from laser driven multi-species sources by employing differentially filtered image plate detectors in Thomson spectrometers
A novel method for characterising the full spectrum of deuteron ions emitted
by laser driven multi-species ion sources is discussed. The procedure is based
on using differential filtering over the detector of a Thompson parabola ion
spectrometer, which enables discrimination of deuterium ions from heavier ion
species with the same charge-to-mass ratio (such as C6+, O8+, etc.). Commonly
used Fuji Image plates were used as detectors in the spectrometer, whose
absolute response to deuterium ions over a wide range of energies was
calibrated by using slotted CR-39 nuclear track detectors. A typical deuterium
ion spectrum diagnosed in a recent experimental campaign is presented.Comment: 7 pages, 7 figure
Compliant actuation based on dielectric elastomers for a force-feedback device: modeling and experimental evaluation
Thanks to their large power densities, low costs and shock-insensitivity, Dielectric Elastomers (DE) seem to be a promising technology for the implementation of light and compact force-feedback devices such as, for instance, haptic interfaces. Nonetheless, the development of these kinds of DE-based systems is not trivial owing to the relevant dissipative phenomena that affect the DE when subjected to rapidly changing deformations. In this context, the present paper addresses the development of a force feedback controller for an agonist-antagonist linear actuator composed of a couple of conically-shaped DE films and a compliant mechanism behaving as a negative-rate bias spring. The actuator is firstly modeled accounting for the viscohyperelastic nature of the DE material. The model is then linearized and employed for the design of a force controller. The controller employs a position sensor, which determines the actuator configuration, and a force sensor, which measures the interaction force that the actuator exchanges with the environment. In addition, an optimum full-state observer is also implemented, which enables both accurate estimation of the time-dependent behavior of the elastomeric material and adequate suppression of the sensor measurement noise. Preliminary experimental results are provided to validate the proposed actuator-controller architecture 
Signatures of the Self-Similar Regime of Strongly Coupled Stimulated Brillouin Scattering for Efficient Short Laser Pulse Amplification
Plasma-based laser amplification is considered as a possible way to overcome the technological limits of
present day laser systems and achieve exawatt laser pulses. Efficient amplification of a picosecond laser
pulse by stimulated Brillouin scattering (SBS) of a pump pulse in a plasma requires to reach the self-similar
regime of the strongly coupled (SC) SBS. In this Letter, we report on the first observation of the signatures
of the transition from linear to self-similar regimes of SC-SBS, so far only predicted by theory and
simulations. With a new fully head-on collision geometry, subpicosecond pulses are amplified by a factor
of 5 with energy transfers of few tens of mJ. We observe pulse shortening, frequency spectrum broadening,
and down-shifting for increasing gain, signatures of SC-SBS amplification entering the self-similar regime.
This is also confirmed by the power law dependence of the gain on the amplification length: doubling the
interaction length increases the gain by a factor 1.4. Pump backward Raman scattering (BRS) on SC-SBS
amplification has been measured for the first time, showing a strong decrease of the BRS amplitude and
frequency bandwidth when SBS seed amplification occurs
Defining an Essence of Structure Determining Residue Contacts in Proteins
The network of native non-covalent residue contacts determines the three-dimensional structure of a protein. However, not all contacts are of equal structural significance, and little knowledge exists about a minimal, yet sufficient, subset required to define the global features of a protein. Characterisation of this “structural essence” has remained elusive so far: no algorithmic strategy has been devised to-date that could outperform a random selection in terms of 3D reconstruction accuracy (measured as the Ca RMSD). It is not only of theoretical interest (i.e., for design of advanced statistical potentials) to identify the number and nature of essential native contacts—such a subset of spatial constraints is very useful in a number of novel experimental methods (like EPR) which rely heavily on constraint-based protein modelling. To derive accurate three-dimensional models from distance constraints, we implemented a reconstruction pipeline using distance geometry. We selected a test-set of 12 protein structures from the four major SCOP fold classes and performed our reconstruction analysis. As a reference set, series of random subsets (ranging from 10% to 90% of native contacts) are generated for each protein, and the reconstruction accuracy is computed for each subset. We have developed a rational strategy, termed “cone-peeling” that combines sequence features and network descriptors to select minimal subsets that outperform the reference sets. We present, for the first time, a rational strategy to derive a structural essence of residue contacts and provide an estimate of the size of this minimal subset. Our algorithm computes sparse subsets capable of determining the tertiary structure at approximately 4.8 Å Ca RMSD with as little as 8% of the native contacts (Ca-Ca and Cb-Cb). At the same time, a randomly chosen subset of native contacts needs about twice as many contacts to reach the same level of accuracy. This “structural essence” opens new avenues in the fields of structure prediction, empirical potentials and docking
- …