“La destrezza di guardare oltre”: Close-up on the representation of women in Silvio Soldini’s le acrobate and pane e Tulipani

Questo saggio analizza il modo in cui Silvio Soldini rappresenta la donna nei film Le acrobate (1997) e Pane e tulipani (2000). Il modo in cui i personaggi femminili vengono rappresentati in questi due film si distingue rispetto ad altri esempi tratti dalla storia del cinema italiano soprattutto per il modo in cui Soldini tratta i rapporti tra donne, che diventano anche un modo di orientarsi diverso per comprendere se stessi ed il mondo. Tali rapporti si richiamano alla pratica dell’affidamento (o delle relazioni) proposta dalla Libreria delle Donne di Milano

Thermal boundary effects on a GT liner structure

GT combustor liners are subjected to mechanical and thermal loads that damage the structure and reduce their operational life. Among those, the thermo-acoustic instabilities develop, generating pressure oscillations because of the interaction between heat release, acoustic waves and structure vibrations. The vibratory behaviour of the structure is the result of these phenomena and undergoes repeated reversals of the main deformation mechanisms as a function of the operating load of the engine. Monitoring and evaluating the operational load history and the life consumption rate of combustor components is essential to sustain a reliable risk-based maintenance in the GT combustion hardware. The non-linear material behaviour can activate possible interactions causing coupled damage mechanisms and become a life threatening mode of failure. A methodology for modelling both the dynamic and static behaviour of a GT cannular combustion chamber by utilizing a combined fluid-structure approach is presented in this study. Together with the calculation of the heat fluxes through the liner, the effects of the modifications at the thermal boundary conditions were used to investigate the modifications in the liner structural properties and the stresses development at different GT loads. The monitored pressure oscillations during operations has been investigated by performing both acoustic and structural dynamics. A correlation with the observed failure has been proposed by investigating stress relaxation phenomena’s, creep and plastic effects for base load and part load operations

Post-Accident Analysis of Vapour Cloud Explosions in Fuel Storage Areas

A Vapour cloud explosion which occurred in a large fuel storage area close to the harbour of Naples (Italy) was analysed by different methods. Useful 'experimental data' were obtained by the post-accident damage analysis (minimum overpressure experienced by different items) and by the seismograms recorded at different stations at the time of explosion (explosion duration and intensity). The analysis of the seismic data allowed a first estimate of the amount of vaporized fuel. A more accurate estimate was obtained by modelling the rate of evaporation of the liquid fuel and the vapour cloud dispersion in the surrounding atmosphere. The dispersion calculation furnished the input data for the CFD gas explosion simulator AutoReagas and constituted the basis for a sensitivity analysis of the results to the amount of fuel involved in the explosion. The results obtained with the different methods above were critically discussed and compared to the results obtained with the Multi-Energy method

Probabilistic approaches for assessing rainfall thresholds triggering shallow landslides. The study case of the peri-vesuvian area (Southern Italy)

Ash-fall pyroclastic soil deposits covering steep carbonate slopes in the peri-Vesuvian area (southern Italy) are periodically involved in shallow landslides (about 700 events were recorded during the last three centuries, as reported by CASCINI et alii, 2008), triggered by intense and/or prolonged rainfall events, which evolve as catastrophic debris flows. In the last decades, many studies have been focused on estimating reliable relationships among the triggering of shallow landslides and the amount and duration of rainfall events, as well as the role played by antecedent soil hydrological conditions. Results of these studies have been expected to give information on temporal hazard to landslide onset to be used for setting a reliable early warning system. In this paper we present probabilistic approaches to assess rainfall thresholds triggering shallow landslides by classical empirical methods and to manage the uncertainties related to biases of data. At this scope, rainfall events related to the occurrence of debris flows along slopes of the Sarno and Lattari Mountains, known from chronicles of the last century, were analyzed by means of the empirical models of Intensity-Duration (I-D) (CAINE, 1980) and rainfall recorded in the day of the landslide occurrence (P) vs the antecedent cumulated rainfall (Pa) (CROZIER & EYLES, 1980). In order to limit and to assess uncertainties related to biases of rainfall data, a comparison with the regional probability model of high intensity rainfall, carried out in the framework of the VAPI Project (ROSSI & VILLANI, 1994) has been carried out. Moreover, rainfall data were processed by a bivariate logistic regression model resulting in the assessment of probability to landslide triggering, given an assumed rainfall event. The I-D empirical rainfall thresholds obtained by Caine model (1980) were compared to rainfall thresholds estimated by deterministic approaches (DE VITA et alii, 2013; NAPOLITANO et alii, 2016) showing a good match

Preventing postsurgical venous thromboembolism: pharmacological approaches

The use of antithrombotic drugs for the prevention of venous thromboembolism (VTE) in patients undergoing surgery is presently based on solid principles and high-level scientific evidence. This article reviews current strategies of pharmacological thromboprophylaxis. The level of VTE risk following surgery depends on a variety of factors that the surgeon should take into account, including the type of surgery and the presence of additional risk factors, such as elderly age and cancer. In patients undergoing minor general surgery, early mobilization is sufficient as prophylaxis, whereas in those undergoing major general surgery, thromboprophylaxis with low molecular weight heparin (LMWH), low-dose unfractionated heparin, or the pentasaccharide fondaparinux is recommended. Patients undergoing major orthopedic surgery have a particularly high risk of VTE, and routine thromboprophylaxis with LMWH, fondaparinux, or a vitamin K antagonist (international normalized ratio target: 2.0 to 3.0) is the standard of care in this group of patients. Recently, two new oral anticoagulants, rivaroxaban (a factor Xa inhibitor) and dabigatran etexilate (a direct thrombin inhibitor) have been licensed to be used for thromboprophylaxis after orthopedic surgery in Europe. Mechanical methods of thromboprophylaxis (compression stockings, intermittent pneumatic compression, vena cava filters), not discussed in detail in this review, should always be considered in patients at high thrombotic risk, in association with the pharmacolocical strategies, or in cases of contraindications to antocoagulants, as in patients or procedures at high risk of bleeding

a tailored maintenance management system to control spare parts life cycle

Abstract The maintenance of complex production systems became increasingly crucial to ensure the competitiveness of companies and service level to their clients. Because of product customization the number of mechanical and electrical components and functional groups of manufacturing lines enhanced with their complexity. To face this concern, the physical and logical design of such systems is typically partitioned among several groups of engineers and designers. Consequently, a holistic awareness of the whole project is lacking and the maintenance of such systems becomes even more challenging. In view of this, new tailored support-decision tools able to manage and control the life cycle of spare parts from their design, throughout the run time, and to their failure and replacement are necessary. This paper illustrates an original maintenance management system (MMS) resulting by the combination of different computerized tools able to integrate the information flow behind the life cycle of a generic component. The proposed system supports coordination among groups of engineers and practitioners through graphic user interfaces (GUIs) and performance i.e. cost, reliability, dashboards, which lead decision-making from the design phase to the planning of maintenance tasks along the life of the manufacturing line. These tools are validated with a real-world instance from the tobacco industry which allows assessing how components belonging to the same functional group may differently behave over their life cycle. The results suggest that the holistic awareness on the whole manufacturing system provided by the proposed MMS can support task design and schedule of maintenance actions providing the reduction of more than 20% of the total cost and time for maintenance actions. The practical example shown contributes to shed light on the potentials of new paradigms for maintenance management in the industry 4.0

Simulating the sound transmission loss of complex curved panels with attached noise control materials using periodic cell wavemodes

International audienceThe sound transmission loss of complex curved aircraft panels under diffuse acoustic field excitation is experimentally and numerically studied. Two different aircraft sidewall panels are considered: a thick composite sandwich panel and a thin aluminium panel with stiffening elements (stringers and frames). Both bare configuration and with attached soundproofing material are tested in laboratory conditions in coupled rooms. The numerical approach relies on a wave finite element method including modal order reduction at cell scale and an extension based on the transfer matrix method, for the inclusion of poroelastic treatments. The results obtained show that the proposed numerical scheme is efficient for predicting the sound transmission loss of such complex structures

Toll-like receptor kinetics in septic shock patients: a preliminary study.

The aim of this study is to evaluate some inflammatory parameter changes in septic shock patients and their possible correlation with clinical outcome, in particular when continuous veno-venous hemofiltration (CVVH) treatment is required. Considering the objective difficulty in enrolling this kind of patient, a preliminary study was initiated on seventeen septic shock patients admitted to a medical and surgical ICU. The mRNA expression of Toll-like receptor (TLR)-1, TLR-2, TLR-4, TLR-5, TLR-9, TNFalpha, IL-8 and IL-1beta was assessed, the plasmatic concentrations of IL-18, IL-2, IL-10 and TNFalpha were measured on the day of sepsis diagnosis and after 72 h. In those patients who developed acute renal failure unresponsive to medical treatment and who underwent CVVH treatment the same parameters were measured every 24 h during CVVH and after completion of the treatment. On sepsis diagnosis, gene expression of TLRs was up-regulated compared to the housekeeping gene in all the patients. After 72 h, in 35% of the patients a down-regulation of these genes was found compared to day 1, but it was not associated with a reduction of cytokine serum levels or improved clinical signs, better outcome or reduced mortality. After high volume hemofiltration treatment, cytokine serum levels and TLR expression were not significantly modified. In conclusion, considering the not numerous number of cases, from our preliminary study, we cannot certainly correlate TLR over-expression in septic shock patients with severity or outcome scores