The Mid-Pleistocene Transition induced by delayed feedback and bistability

The Mid-Pleistocene Transition, the shift from 41 kyr to 100 kyr glacial-interglacial cycles that occurred roughly 1 Myr ago, is often considered as a change in internal climate dynamics. Here we revisit the model of Quaternary climate dynamics that was proposed by Saltzman and Maasch (1988). We show that it is quantitatively similar to a scalar equation for the ice dynamics only when combining the remaining components into a single delayed feedback term. The delay is the sum of the internal times scales of ocean transport and ice sheet dynamics, which is on the order of 10 kyr. We find that, in the absence of astronomical forcing, the delayed feedback leads to bistable behaviour, where stable large-amplitude oscillations of ice volume and an equilibrium coexist over a large range of values for the delay. We then apply astronomical forcing. We perform a systematic study to show how the system response depends on the forcing amplitude. We find that over a wide range of forcing amplitudes the forcing leads to a switch from small-scale oscillations of 41 kyr to large-amplitude oscillations of roughly 100 kyr without any change of other parameters. The transition in the forced model consistently occurs near the time of the Mid-Pleistocene Transition as observed in data records. This provides evidence that the MPT could have been primarily a forcing-induced switch between attractors of the internal dynamics. Small additional random disturbances make the forcing-induced transition near 800 kyr BP even more robust. We also find that the forced system forgets its initial history during the small-scale oscillations, in particular, nearby initial conditions converge prior to transitioning. In contrast to this, in the regime of large-amplitude oscillations, the oscillation phase is very sensitive to random perturbations, which has a strong effect on the timing of the deglaciation events

A Behavioral Confirmation and Reduction of the Natural versus Synthetic Drug Bias

Research reveals a biased preference for natural versus synthetic drugs; however, this research is based upon self-report and has not examined ways to reduce the bias. We examined these issues in five studies involving 1,125 participants. In a Pilot Study (N = 110), participants rated the term natural to be more positive than the term synthetic, which reveals a default natural-is-better belief. In Studies 1 (N = 109) and 2 (N = 100), after a supposed personality study, participants were offered a thank you “gift” of a natural or synthetic pain reliever. Approximately 86% (Study 1) and 93% (Study 2) of participants chose the natural versus synthetic pain reliever, which provide a behavioral choice confirmation of the natural drug bias. In Studies 3 (N = 350) and 4 (N = 356), participants were randomly assigned to a control or experimental condition and were asked to consider a scenario in which they had a medical issue requiring a natural versus synthetic drug. The experimental condition included a stronger (Study 3) or weaker (Study 4) rational appeal about the natural drug bias and a statement suggesting that natural and synthetic drugs can be good or bad depending upon the context. In both studies, the natural bias was reduced in the experimental condition, and perceived safety and effectiveness mediated this effect. Overall, these data indicate a bias for natural over synthetic drugs in preferences and behavioral choices, which might be reduced with a rational appeal

GM1 Ganglioside Modifies α-Synuclein Toxicity and is Neuroprotective in a Rat α-Synuclein Model of Parkinson\u27s Disease.

While GM1 may interact with α-synuclein in vitro to inhibit aggregation, the ability of GM1 to protect against α-synuclein toxicity in vivo has not been investigated. We used targeted adeno-associated viral vector (AAV) overexpression of human mutant α-synuclein (A53T) in the rat substantia nigra (SN) to produce degeneration of SN dopamine neurons, loss of striatal dopamine levels, and behavioral impairment. Some animals received daily GM1 ganglioside administration for 6 weeks, beginning 24 hours after AAV-A53T administration or delayed start GM1 administration for 5 weeks beginning 3 weeks after AAV-A53T administration. Both types of GM1 administration protected against loss of SN dopamine neurons and striatal dopamine levels, reduced α-synuclein aggregation, and delayed start administration of GM1 reversed early appearing behavioral deficits. These results extend prior positive results in MPTP models, are consistent with the results of a small clinical study of GM1 in PD patients that showed slowing of symptom progression with chronic use, and argue for the continued refinement and development of GM1 as a potential disease modifying therapy for PD

Edaq530: a transparent, open-end and open-source measurement solution in natural science education

We present Edaq530, a low-cost, compact and easy-to-use digital measurement solution consisting of a thumb-sized USB-to-sensor interface and a measurement software. The solution is fully open-source, our aim being to provide a viable alternative to professional solutions. Our main focus in designing Edaq530 has been versatility and transparency. In this paper, we shall introduce the capabilities of Edaq530, complement it by showing a few sample experiments, and discuss the feedback we have received in the course of a teacher training workshop in which the participants received personal copies of Edaq530 and later made reports on how they could utilise Edaq530 in their teaching

Research review: young people leaving care

This paper reviews the international research on young people leaving care. Set in the context of a social exclusion framework, it explores young people's accelerated and compressed transitions to adulthood, and discusses the development and classification of leaving care services in responding to their needs. It then considers the evidence from outcome studies and argues that adopting a resilience framework suggests that young people leaving care may fall into three groups: young people 'moving on', 'survivors' and 'victims'. In concluding, it argues that these three pathways are associated with the quality of care young people receive, their transitions from care and the support they receive after care

Codesigned Shared Decision-Making Diabetes Management Plan Tool for Adolescents With Type 1 Diabetes Mellitus and Their Parents: Prototype Development and Pilot Test

Background: Adolescents with type 1 diabetes mellitus have difficulty achieving optimal glycemic control, partly due to competing priorities that interfere with diabetes self-care. Often, significant diabetes-related family conflict occurs, and adolescents’ thoughts and feelings about diabetes management may be disregarded. Patient-centered diabetes outcomes may be better when adolescents feel engaged in the decision-making process. Objective: The objective of our study was to codesign a clinic intervention using shared decision making for addressing diabetes self-care with an adolescent patient and parent advisory board. Methods: The patient and parent advisory board consisted of 6 adolescents (teens) between the ages 12 and 18 years with type 1 diabetes mellitus and their parents recruited through our institution’s Pediatric Diabetes Program. Teens and parents provided informed consent and participated in 1 or both of 2 patient and parent advisory board sessions, lasting 3 to 4 hours each. Session 1 topics were (1) patient-centered outcomes related to quality of life, parent-teen shared diabetes management, and shared family experiences; and (2) implementation and acceptability of a patient-centered diabetes care plan intervention where shared decision making was used. We analyzed audio recordings, notes, and other materials to identify and extract ideas relevant to the development of a patient-centered diabetes management plan. These data were visually coded into similar themes. We used the information to develop a prototype for a diabetes management plan tool that we pilot tested during session 2. Results: Session 1 identified 6 principal patient-centered quality-of-life measurement domains: stress, fear and worry, mealtime struggles, assumptions and judgments, feeling abnormal, and conflict. We determined 2 objectives to be principally important for a diabetes management plan intervention: (1) focusing the intervention on diabetes distress and conflict resolution strategies, and (2) working toward a verbalized common goal. In session 2, we created the diabetes management plan tool according to these findings and will use it in a clinical trial with the aim of assisting with patient-centered goal setting. Conclusions: Patients with type 1 diabetes mellitus can be effectively engaged and involved in patient-centered research design. Teens with type 1 diabetes mellitus prioritize reducing family conflict and fitting into their social milieu over health outcomes at this time in their lives. It is important to acknowledge this when designing interventions to improve health outcomes in teens with type 1 diabetes mellitus

Synthesis of Stimuli-Responsive Programmable Polymers Through Ring-Opening–Metathesis Cross-Metathesis (ROM-CM)

Stimuli-responsive polymers can change their physical and/or chemical properties in response to external stimuli. These polymers have found great success in a number of important areas including molecular gels and biomedical engineering, as well as success in applications such as targeted drug delivery and biosensors. We have been working toward the development of programmable polymers that remember the response after a stimulus is withdrawn. To this end, we set out to synthesize specific functional monomers. While different types of reactions could potentially result in the desired target monomer, we studied the ring-opening metathesis–cross-metathesis reaction (ROM-CM). Previous work of ours synthesized monomer 1a, a cis-norbornene-2,3-dicarboxylic imide precursor to functional monomer 2a. We report herein the attempts to prepare the target monomers 2a and 3 via alternative ROM-CM routes that varied in starting materials, solvent systems, reaction temperatures, and catalyst amounts. We discovered that methanol based solvent systems resulted in a higher production of oligomers and other side products. In addition, one promising route using the new maleic acid starting material in place of ethyl acrylate was found to effectively undergo the ROM-CM reaction with monomer 1b. This reaction appeared to produce the desired product 2b which is currently being converted to the diester monomer 3 for further characterization. Future efforts will involve further examination of the ROM-CM reaction of maleic acid and other olefins with the norbornene-dicarboxylic imide precursor, dilute conditions in norbornene reactions, and alternative synthetic routes

Laser Light Sheet Flow Visualization of the Space Launch System Booster Separation Test

Planar flow visualizations were obtained in a wind tunnel test in the NASA Langley Research Centers Unitary Plan Wind Tunnel using the laser-light-sheet method. This method uses a laser to illuminate fine particles generated in the wind tunnel to visualize flow structures. The test article was designed to simulate the separation of the two solid rocket boosters (SRBs) from the core stage of the NASA Space Launch System (SLS) at Mach 4 using a scale model. The test was run on of the SLS Block 1B Cargo (27005) configuration and the SLS Block 1B Crew (28005) configuration. Planar flow visualization was obtained only on the crew configuration. Air at pressures up to 1500 psi was used to simulate plumes from the booster separation motors (BSMs) located at the nose, and aft skirt of the two boosters. The facility free stream was seeded with water vapor, which condensed and froze into small ice crystals in the tunnel nozzle expansion. A continuous wave green (532 nm) laser sheet was used to illuminate the ice crystals, and the resulting Mie-scattered light was collected with a camera. The resulting images clearly identify shock waves and other flow features including BSM plume shapes. Measurements were acquired for different BSM pressures and booster separation locations