The carmine maggiore bell tower: An inclusive and sustainable restoration experience

The preservation of cultural heritage needs a restoration design format that can only be achievable by an in-depth multidisciplinary approach. Besides, a sustainable project requires that the link between architecture and technology be expressed through a “conscious” approach to the building. Therefore, each design must be based on the in-depth knowledge of history, construction rules, and mechanical properties of buildings to be restored. The bell towers are among the most exposed to degradation and earthquake damage constructions for their intrinsic geometry and structure. The “Carmine Maggiore” bell tower is one of the most important symbols of Naples (Italy) and, at 72 m high, it has stood out for centuries against the city. The tower underwent many significant damages and structural changes over time. The design, here illustrated, was aimed at restoring and repairing this bell tower, preserving existing materials, without altering the signs of time. The paper shows the methodology followed in the project, which, starting from an in-depth historical analysis and a detailed geometric and diagnostic survey, through several structural analyses, allowed an “inclusive” project (restoration, structural, and lighting project) based on suitable solutions that meet all the requirements of compatibility, sustainability, and structural safety

Soil water availability and relationship between canopy and roots in young olive trees (cv Coratina).

Trials were carried out in the Basilicata region (41°03’ N, 15°42’ E, Southern Italy) using ownrooted plants of the cultivar Coratina planted in 1992 at distances of 6 x 3 m. During 1992, the whole plot (about 7000 m2) was irrigated. From 1993 onwards, irrigation was suspended in part of the plot. A representative number of plants during 1992, 1993, 1994 and 1998 was destroyed in order to carry out dry weight measurements on roots and canopy. The ratio between root and leaf dry weight was always greater in nonirrigated plants compared to irrigated ones. Roots explored a soil volume ranged from 0.5 m3 in the first year to 16.8 m3 in the seventh year for irrigated plants and from 0.5 m3 to 13.4 m3 for non-irrigated ones. The study showed that in deep soil, with a greater capacity for water storage during the rainfall season, limited water supply (220-1350 m3 ha-1) during the first seven years from planting increased canopy growth by 79% compared to nonirrigated plants, but made little difference to root growth. In non-irrigated plants, canopy growth (but not root growth) was drastically reduced, as a defence strategy against water deficit, making for a better root/leaf ratio and consequently greater water availability for leaves

Investigation of the Temperature Effects on Copper Losses in Hairpin Windings

Today, an extensive electrification is occurring in all industrial sectors, with a special interest seen in the automotive and aerospace industries. The electric motor, surely, is one of the main actors in this context, and an ever-increasing effort is spent with the aim of improving its efficiency and torque density. Hairpin windings are one of the recent technologies which are implemented onto the stator of the electric motor. Compared to conventional random windings, it inherently features lower DC resistance, higher fill factor, better thermal performance, improved reliability, and an automated manufacturing process. However, its bottleneck is the high ohmic losses at high-frequency operations due to skin and proximity effects (AC losses), resulting in a negative impact on the temperature map of the machine. Nevertheless, while it is well-known that DC losses increase linearly with the operating temperatures, the AC losses trend needs further insight. This paper demonstrates that operating the machine at higher temperatures could be beneficial for overall efficiency, especially at high-frequency operations. This suggests that a paradigm shift is required for the design of electric motors equipped with hair-pin windings, which should therefore focus on a temperature-oriented approach. In addition, the effect of the rotor topology on AC losses, which is often overlooked, is also considered in this paper. The combination of these effects is used to carry out observations and, eventually, to provide design recommendations. Finite element electromagnetic and thermal evaluations are performed to prove the findings of this research

Considerations on the preliminary sizing of electrical machines with hairpin windings

Although the standard preliminary sizing of electrical machines equipping random windings is well consolidated and is worldwide acknowledged to be a good starting point for the design, there is no proof of accuracy and confidence when it comes to hairpin windings. This winding technology is gaining extensive attention due to its inherently high slot fill factor, good heat dissipation, strong rigidity, and short end-windings. These features make hairpin windings a potential candidate for some traction application to enhance power and/or torque densities. In this paper, a comparative design is done using the classical sizing tools available in literature between two surface-mounted permanent magnet synchronous machines, one featuring a random winding and one with a hairpin layout. The study aims at highlighting the hairpin winding challenges at high frequency operations and at showing limits of applicability of these standard approaches when applied to this technology. For verification purposes, finite element evaluations are also performed

Preliminary investigations on sunburn in Chardonnay grapevine variety

The aim of this investigation was to determine if a temperature response curve can be used to describe sunburn in grape berries. Trials were carried out at the Viticulture and Enology Department (University of California, Davis) on cv Chardonnay (clone 29) grown under both field and greenhouse conditions. Greenhouse plants were two years old, grown in 5 L pots, and watered daily with a modified Hoagland’s nutrient solution. The vines were pruned to two shoots with one or two clusters per shoot, and the shoots were vertically trained to approximately 1.5 m. Field-grown vines were clone 29 grafted onto 101-14 rootstock, planted at 2.5 x 3.7 m spacing, cane pruned, and VSP trained. Rows were north-south oriented. In order to increase the temperature of the berry surface, solar radiation was concentrated using a normal reading lens with different magnifications degrees. Temperature was measured with a copper-constantan thermocouples attached to the berry surface. Experiments were performed just before harvest. Sunburn was caused by using different ranges of temperatures held constant for 2 or 5 minutes in the case of greenhouse plants and 5, 10, and 15 minutes in the case of field-grown plants. The effects of treatments were rated on visual basis by a panel of 3 people at one day intervals for three or four consecutive days after the treatments. On the last day, treated berries were harvested and analyzed for cell viability and membrane integrity using the fluorescein diacetate (FDA) technique. In greenhouse grown vines, a temperature of 38-40 °C for 5 minutes was sufficient to cause visual symptoms of sunburn two days after the treatments, even if no cells were permanently damaged. In field-grown vines, 5 minutes at 40-43 °C caused 12.4% cell mortality and permanent surface deformation. In conclusion, exposure of berries to a surface temperature of 40-43 °C appears to be effective in causing sunburn in greenhouse and field-grown plants. The radiation regime experienced by the cluster during the growing season may be important to determine the critical level of temperature causing sunburn

Surface Effects on the Dynamics of Liquid Crystalline Thin Films Confined in Nanoscale Cavities

The dynamics of 4-n-pentyl-4\u27-cyanobiphenyl (5CB) nematic liquid crystalline thin films have been studied in real time using step-scan Fourier transform infrared spectroscopy (FTIR). In these studies, the liquid crystal was confined in a nanocavity defined and bounded by an interdigitated gold electrode array. The gold microstructures were microfabricated on a zinc selenide (IR-transparent) window. The 5CB interactions with the ZnSe substrate result in surface-induced ordering of the ultrathin layers (on the order of 40 nm). As the films increase in thickness, the nanoscale organization induced by the surface layer becomes a less significant contributor to the overall bulk structure of the sample. Time-resolved FTIR studies have enabled the measurement of rate constants for the orientation and relaxation of the thin films under an applied electric field as a direct function of confinement dimensions. Cell thicknesses ranging from 40 to 300 nm were studied. The measured rate behaviors demonstrate the strong effects of the interactions occurring between the surfaces of the ZnSe crystals and the 5CB on the dynamics of the liquid crystalline assembly. Time-resolved studies reveal kinetically inhomogeneous line shapes for thicker films while ultrathin films maintain kinetically homogeneous peaks, suggesting the development of liquid crystalline domains or other inhomogeneities over this length scale in the transition from the surface layer to bulk

Linguistic politeness across Austria and Italy: Backing out of an invitation with an instant message

The study compares how native speakers of German from the area of Innsbruck (Austria) and native speakers of Italian from the area of Rome (Italy) perceive the communicative act of backing out of an invitation for dinner at the last minute, in a situation of low social distance. The purpose of the study is twofold: to shed light on the orientation of Austrian German and Italian languages/cultures in terms of linguistic politeness, and to expand empirical cross-cultural research to a less-commonly investigated speech act. Data collected by means of a discourse completion task (DCT) are triangulated with responses to an assessment question and metapragmatic comments, and analyzed following a quantitative approach. The analysis of the DCT findings shows some cross-group differences in the choice of speech act realization strategies and internal modifiers. However, the overall results reveal more similarities than differences between the two populations regarding the informants’ perception of face threat in last-minute cancellations. This seems to disprove the idea that the two groups belong to different cultural frameworks in terms of politeness orientation, at least as far as it concerns the specific speech act under investigation

Autonomous Light Management in Flexible Photoelectrochromic Films Integrating High Performance Silicon Solar Microcells

Commercial smart window technologies for dynamic light and heat management in building and automotive environments traditionally rely on electrochromic (EC) materials powered by an external source. This design complicates building-scale installation requirements and substantially increases costs for applications in retrofit construction. Self-powered photoelectrochromic (PEC) windows are an intuitive alternative wherein a photovoltaic (PV) material is used to power the electrochromic device, which modulates the transmission of the incident solar flux. The PV component in this application must be sufficiently transparent and produce enough power to efficiently modulate the EC device transmission. Here, we propose Si solar microcells (μ-cells) that are i) small enough to be visually transparent to the eye, and ii) thin enough to enable flexible PEC devices. Visual transparency is achieved when Si μ-cells are arranged in high pitch (i.e. low-integration density) form factors while maintaining the advantages of a single-crystalline PV material (i.e., long lifetime and high performance). Additionally, the thin dimensions of these Si μ-cells enable fabrication on flexible substrates to realize these flexible PEC devices. The current work demonstrates this concept using WO₃ as the EC material and V₂O₅ as the ion storage layer, where each component is fabricated via sol-gel methods that afford improved prospects for scalability and tunability in comparison to thermal evaporation methods. The EC devices display fast switching times, as low as 8 seconds, with a modulation in transmission as high as 33%. Integration with two Si μ-cells in series (affording a 1.12 V output) demonstrates an integrated PEC module design with switching times of less than 3 minutes, and a modulation in transmission of 32% with an unprecedented EC:PV areal ratio

Elbow angle modulates corticospinal excitability to the resting biceps brachii at both spinal and supraspinal levels

NEW FINDINGS: What is the central question of this study? Corticospinal excitability to biceps brachii is known to modulate according to upper-limb posture. Here, cervicomedullary stimulation was used to investigate potential spinal contributions to elbow angle-dependent changes in corticospinal excitability at rest. What is the main finding and its importance? At more extended elbow angles, biceps responses to cervicomedullary stimulation were decreased, whereas cortically evoked responses (normalized to cervicomedullary-evoked responses) were increased. Results suggest decreased spinal excitability but increased cortical excitability as the elbow is placed in a more extended position, an effect that is unlikely to be attributable to cutaneous stretch receptor activation. ABSTRACT: Corticospinal excitability to biceps brachii is known to modulate according to upper-limb posture. In study 1, our aim was to investigate potential spinal contributions to this modulation and the independent effect of elbow angle. Biceps responses to transcranial magnetic stimulation (motor evoked potentials; MEPs) and electrical cervicomedullary stimulation (cervicomedullary motor evoked potentials; CMEPs) were measured at five elbow angles ranging from full extension to 130 deg of flexion. In study 2, possible contributions of cutaneous stretch receptors to elbow angle-dependent excitability changes were investigated by eliciting MEPs and CMEPs in three conditions of skin stretch about the elbow (stretch to mimic full extension, no stretch or stretch to mimic flexion). Each study had 12 participants. Evoked potentials were acquired at rest, with participants seated, the shoulder flexed 90 deg and forearm supinated. The MEPs and CMEPs were normalized to maximal compound muscle action potentials. In study 1, as the elbow was moved to more extended positions, there were no changes in MEPs (P = 0.963), progressive decreases in CMEPs (P \u3c 0.0001; CMEPs at 130 deg flexion ∼220% of full extension) and increases in the MEP/CMEP ratio (P = 0.019; MEP/CMEP at 130 deg flexion ∼20% of full extension). In study 2, there were no changes in MEPs (P = 0.830) or CMEPs (P = 0.209) between skin stretch conditions. Therefore, although results suggest a decrease in spinal and an increase in supraspinal excitability at more extended angles, the mechanism for these changes in corticospinal excitability to biceps is not cutaneous stretch receptor feedback