Blood flow measurement using a highly filled carbon polymer sandwich sensor and an elasto‐pseudo compressible vascular flow

Vascular grafts are widely employed in clinical practice and still pose significant problems of compatibility and longevity, particularly when the prosthesis is to replace arteries of small diameter. Once a graft has been implanted in the vascular tree, there is no easy way of assessing its interactions with the surrounding tissue. Doppler flow probes or some imaging techniques are commonly used to monitor flow velocity in vascular prostheses. It is, however, difficult to monitor a patient's recovery on a continuous basis. Continuous means of measurement can be quite invaluable. This paper presents a high‐carbon filled polymer (HCFP) sensor that is developed for blood flow measurement in vascular grafts. Furthermore, a computational fluid dynamics model of incompressible blood flow in elastic blood vessels is presented

Workplace factors associated with mental health of healthcare workers during the COVID-19 pandemic: an international cross-sectional study

BACKGROUND: The association of workplace factors on mental health of healthcare workers (HCWs) during the COVID-19 pandemic needs to be urgently established. This will enable governments and policy-makers to make evidence-based decisions. This international study reports the association between workplace factors and the mental health of HCWs during the pandemic. METHODS: An international, cross-sectional study was conducted in 41 countries. The primary outcome was depressive symptoms, derived from the validated Patient Health Questionnaire-2 (PHQ-2). Multivariable logistic regression identified factors associated with mental health outcomes. Inter-country differences were also evaluated. RESULTS: A total of 2,527 responses were received, from 41 countries, including China (n=1,213; 48.0%), UK (n=891; 35.3%), and USA (n=252; 10.0%). Of all participants, 1343 (57.1%) were aged 26 to 40 years, and 2021 (80.0%) were female; 874 (34.6%) were doctors, and 1367 (54.1%) were nurses. Factors associated with an increased likelihood of depressive symptoms were: working in the UK (OR=3.63; CI=[2.90-4.54]; p<0.001) and USA (OR=4.10; CI=[3.03-5.54]), p<0.001); being female (OR=1.74; CI=[1.42-2.13]; p<0.001); being a nurse (OR=1.64; CI=[1.34-2.01]; p<0.001); and caring for a COVID-19 positive patient who subsequently died (OR=1.20; CI=[1.01-1.43]; p=0.040). Workplace factors associated with depressive symptoms were: redeployment to Intensive Care Unit (ICU) (OR=1.67; CI=[1.14-2.46]; p=0.009); redeployment with perceived unsatisfactory training (OR=1.67; CI=[1.32-2.11]; p<0.001); not being issued with appropriate personal protective equipment (PPE) (OR=2.49; CI=[2.03-3.04]; p<0.001); perceived poor workplace support within area/specialty (OR=2.49; CI=[2.03-3.04]; p<0.001); and perceived poor mental health support (OR=1.63; CI=[1.38-1.92]; p<0.001). CONCLUSION: This is the first international study, demonstrating that workplace factors, including PPE availability, staff training pre-redeployment, and provision of mental health support, are significantly associated with mental health during COVID-19. Governments, policy-makers and other stakeholders need to ensure provision of these to safeguard HCWs’ mental health, for future waves and other pandemics

Translation and validation study of the Iranian versions of the neck disability index and the neck pain and disability scale

STUDY DESIGN. Cultural translation and psychometric testing. OBJECTIVE. To translate and validate the Iranian versions of the Neck Disability Index (NDI-IR) and the Neck Pain and Disability Scale (NPDS-IR). SUMMARY OF BACKGROUND DATA. The widely used the NDI and the NPDS scales have not been translated and validated for Persian-speaking patients with neck pain. This was to provide a validated instrument to measure functional status in patients with neck pain in Iran. METHODS. The translation and cultural adaptation of the original questionnaires were carried out in accordance with the published guidelines. One hundred and eighty-five patients with neck pain were participated in the study. Patients were asked to complete a questionnaire booklet including the NDI-IR, the NPDS-IR, the Iranian SF-36, and a visual analog scale (VAS) of pain. To carry out the test-retest reliability, 30 randomly selected patients with neck pain were asked to complete the questionnaire booklet 48 hours later for the second time. RESULTS. Cronbach α coefficient for the NDI-IR was 0.88 and for the 4 subscales of the NPDS-IR was found to be satisfactory (ranging from 0.74 to 0.94). The NDI-IR and the NPDS-IR subscales showed excellent test-retest reliability (intraclass correlation coefficient ranged from 0.90 to 0.97; P < 0.01). The correlation between the NDI-IR and the NPDS-IR subscales and functional scales of the SF-36 showed desirable results, indicating a good convergent validity (Pearson correlation coefficients ranged from -0.31 to -0.70). The correlation between the NDI-IR and the VAS was 0.71 and between the NPDS-IR subscales and the VAS ranged from 0.63 to 0.79 (P < 0.01). CONCLUSION. The Iranian versions of the NDI and NPDS are reliable and valid instruments to measure functional status in Persian-speaking patients with neck pain in Iran. They are simple and easy to use and now can be applied in clinical settings and future outcome studies in Iran and other Persian speaking communities. © 2007 Lippincott Williams & Wilkins, Inc

Distal junctional kyphosis in patients with Scheuermann’s disease: a retrospective radiographic analysis

Purpose To investigate the relationship between preoperative and postoperative spinopelvic alignment and occurrence of DJK/DJF. Study design/setting This was a retrospective observational cohort study. Patient sample The sample included 40 patients who underwent posterior correction of SK from January 2006 to December 2014. Outcome measures Correlation analysis between the preoperative and postoperative spinopelvic alignment parameters and development of DJK over the course of the study period were studied. Methods Whole spine X-rays obtained before surgery, 3 months after surgery and at the latest follow-up were analyzed. The following parameters were measured: maximum of thoracic kyphosis (TK), lumbar lordosis (LL), sagittal vertical axis (SVA), pelvic incidence (PI), pelvic tilt (PT), sacral slope (SS), lower instrumented vertebra (LIV) and LIV plumb line. Development of DJK was considered as the primary end point of the study. The patient population was split into a control and DJK group, with 34 patients and 6 patients, respectively. Statistic analysis was performed using unpaired t test for normal contribution and Mann–Whitney test for skew distributed values. The significance level was set to 0.05. Results DJK occurred in 15% (n = 6) over the study period. There was a significantly lower postoperative TK for the group with DJK (42.4 ± 5.3 vs 49.8 ± 6.7, p = 0.015). LIV plumb line showed higher negative values in the DJK group (−43.6 ± 25.1 vs −2.2 ± 17.8, p = 0.0435). Furthermore, postoperative LL changes were lower for the DJK group (33.84 ± 13.86% vs 31.77 ± 14.05, p < 0.0001.) The age of the patients who developed DJK was also significantly lower than that of the control group (16.8 ± 1.7 vs 19.6 ± 4.9, p = 0.0024.) Conclusions SK patients who developed DJK appeared to have a significantly higher degree of TK correction and more negative LIV plumb line. In addition, there may be a higher risk for DJK in patients undergoing corrective surgery at a younger age

Biomechanical evaluation of immediate stability with rectangular versus cylindrical interbody cages in stabilization of the lumbar spine

BACKGROUND: Recent cadaver studies show stability against axial rotation with a cylindrical cage is marginally superior to a rectangular cage. The purpose of this biomechanical study in cadaver spine was to evaluate the stability of a new rectangular titanium cage design, which has teeth similar to the threads of cylindrical cages to engage the endplates. METHODS: Ten motion segments (five L2-3, five L4-5) were tested. From each cadaver spine, one motion segment was fixed with a pair of cylindrical cages (BAK, Sulzer Medica) and the other with paired rectangular cages (Rotafix, Corin Spinal). Each specimen was tested in an unconstrained state, after cage introduction and after additional posterior translaminar screw fixation. The range of motion (ROM) in flexion-extension, lateral bending, and rotation was tested in a materials testing machine, with +/- 5 Nm cyclical load over 10 sec per cycle; data from the third cycle was captured for analysis. RESULTS: ROM in all directions was significantly reduced (p < 0.05) with both types of cages. There was no significant difference in reduction of ROM in flexion-extension (p = 0.6) and rotation (p = 0.92) between the two cage groups, but stability in lateral bending was marginally superior with the rectangular cages (p = 0.11). Additional posterior fixation further reduced the ROM significantly (p < 0.05) in most directions in both cage groups, but did not show any difference between the cage groups. CONCLUSIONS: There was no significant difference in immediate stability in any direction between the threaded cylindrical cage and the new design of the rectangular cage with endplate teeth

Percutaneous suction and irrigation for the treatment of recalcitrant pyogenic spondylodiscitis.

The primary management of pyogenic spondylodiscitis is conservative. Once the causative organism has been identified, by blood culture or biopsy, administration of appropriate intravenous antibiotics is started. Occasionally patients do not respond to antibiotics and surgical irrigation and debridement is needed. The treatment of these cases is challenging and controversial. Furthermore, many affected patients have significant comorbidities often precluding more extensive surgical intervention. The aim of this study is to describe early results of a novel, minimally invasive percutaneous technique for disc irrigation and debridement in pyogenic spondylodiscitis.This article is freely available via Open Access. Click on the Additional Link above to access the full-text via the publisher's sit

A tactile sensor with automatic learning capability for industrial parts inspection

This paper details a prototype tactile sensing system for automated parts inspection. This is a two-dimensional array sensor which is capable of extracting 3-D information from a contact footprint. A Moire fringe method for reading the gratings of the sensing elements is employed. The effect of any local manufacturing defects in grating formulation are eliminated in measurement by the principle of averaging of a number of grating lines. A learning algorithm is devised to generate unique part codes from raw tactile data. The use of this algorithm for automated part identification is also presented