1,503 research outputs found
An Experimental Campaign on the Long-Term Properties of Self Compacting Concrete
In the present paper, the results of an experimental campaign concerning the long-term properties of self-compacting concrete are presented. Five mixes of SCC and one mix of CVC have been employed, with different compressive strength covering the range of application from cast-in-place to prestressed structures. For each mix, compressive strength, elastic modulus and shrinkage evolution with time have been monitored. Creep tests have also been performed at different stress levels and at two ages at loading (7 and 28 days). The influence of concrete strength, stress level have been observed, together with the role played by the mix parameters. The Poisson' ratio evolution with time has been also observed; the role played by the application of long term loads and by different curing conditions on the concrete residual strength has been also investigated. Finally, experimental data both in terms of shrinkage and creep are compared with international code provisions
Naphthalene crystal shape prediction from molecular dynamics simulations
We used molecular dynamics simulations to predict the steady state crystal
shape of naphthalene grown from ethanol solution. The simulations were
performed at constant supersaturation by utilizing a recently proposed
algorithm [Perego et al., J. Chem. Phys., 142, 2015, 144113]. To bring the
crystal growth within the timescale of a molecular dynamics simulation we
applied Well-Tempered Metadynamics with a spatially constrained collective
variable, which focuses the sampling on the growing layer. We estimated that
the resulting steady state crystal shape corresponds to a rhombic prism, which
is in line with experiments. Further, we observed that at the investigated
supersaturations, the face grows in a two step two dimensional
nucleation mechanism while the considerably faster growing faces
and grow new layers with a one step two
dimensional nucleation mechanism
Age-Related Alterations Affecting the Chondrogenic Differentiation of Synovial Fluid Mesenchymal Stromal Cells in an Equine Model
Genetic algorithm full-waveform inversion: uncertainty estimation and validation of the results
We cast the genetic algorithm-full waveform inversion (GA-FWI) in a probabilistic framework that through a multi-step procedure, allows us to estimate the posterior probability distribution (PPD) in model space. Since GA is not a Markov chain Monte Carlo method, it is necessary to refine the PPD estimated by GA (GA PPD) via a resampling of the model space with a Gibbs sampler (GS), thus obtaining the GA+GS PPDs. We apply this procedure to two acoustic 2D models, an inclusion model and the Marmousi model, and we find a good agreement between the derived PPDs and the varying resolution due to changes in the seismic illumination. Finally, we randomly extract several models from the so derived PPDs to start many local full-waveform inversions (LFWIs), which produce final high-resolution models. This set of models is then used to numerically estimate the final uncertainty (GA+GS+LFWI PPD). The multimodal and wide PPDs derived from the GA optimization, become unimodal and narrower after LFWI and, in the well illuminated parts of the subsurface, the final GA+GS+LFWI PPDs contain the true model parameters. This confirms the ability of the GA optimization in finding a velocity model suitable as input to LFWI
Effect of temperature variations on the bond behavior of FRCM applied to masonry
In the last decades, Fiber Reinforced Cementitious Matrix (FRCM) composites were successfully introduced to repair and strengthen existing masonry structures. The good mechanical performances of these materials determined their efficiency as a strengthening technique; however, their durability is still an open issue. As a matter of fact, FRCM composites may be exposed to a combination of different environmental conditions and, additionally, to temperature variations due to solar radiation. The objective of this research was to study the effects of temperature variations on the bond behavior of a FRCM composite, constituted by a basalt grid and a lime-based mortar matrix, applied to masonry. For this purpose, an experimental investigation on thermally conditioned FRCM-strengthened masonry wallets is presented, in which 14 single-lap shear tests were performed. Before testing, samples were exposed to different target temperatures inside a climatic chamber: 32, 40, 50, 60 and 80 degrees C. Thermocouples were embedded within the FRCM reinforcing layers at two different depths to detect the inner temperature profiles and to control the conditioning process. The single-lap shear tests were then carried out inside the same climatic chamber, while maintaining the target temperature constant. A decrease in terms of peak-axial stress was observed by increasing temperature, along with a progressive change in the failure mode, from fiber rupture outside the bonded area to fiber slippage within the mortar matrix layers
Layered Video Transmission on Adaptive OFDM Wireless Systems
Future wireless video transmission systems will consider orthogonal frequency division multiplexing (OFDM) as the basic modulation technique due to its robustness and low complexity implementation in the presence of frequency-selective channels. Recently, adaptive bit loading techniques have been applied to OFDM showing good performance gains in cable transmission systems. In this paper a multilayer bit loading technique, based on the so called "ordered subcarrier selection algorithm," is proposed and applied to a Hiperlan2-like wireless system at 5 GHz for efficient layered multimedia transmission. Different schemes realizing unequal error protection both at coding and modulation levels are compared. The strong impact of this technique in terms of video quality is evaluated for MPEG-4 video transmission
Mating of Argentine Black-and-white Tegus (Salvator merianae) in Miami-Dade County, Florida, USA
- …