Optical diffraction tomography in fluid velocimetry: the use of a priori information

Holographic Particle Image Velocimetry (HPIV) has been used successfully to make threedimensional, three-component flow measurements from holographic recordings of seeded fluid. It is clear that measurements can only be made in regions that contain particles, but simply adding more seeding results in poor quality images that suffer from the effects of multiple scattering. Optical Diffraction Tomography provides a means to reconstruct a 3D map of refractive index from coherent recordings of scattered fields with different illumination conditions. Although the Born Approximation limits the applicability of the technique to weakscattering problems, this approach has been used to create three-dimensional images using a Digital Holographic Microscope (DHM). A non-linear optimization technique, the Conjugated Gradient optimisation Method (CGM) has been previously proposed in microwave imaging for strong scattering problems. In this paper we propose a modification of the CGM which uses apriori information to reduce the number of unknown variables that characterize the object to the position of the seeders. Some 2D numerical experiments have been computed, showing promising results and the value of these is fluid velocimetry is discussed

Holography, tomography and 3D microscopy as linear filtering operations

In this paper we characterise 3D optical imaging techniques as 3D linear shift invariant filtering operations. From the Helmholtz equation that is the basis of scalar diffraction theory we show that the scattered field, or indeed a holographic reconstruction of this field, can be considered to be the result of a linear filtering operation applied to a source distribution. We note that if the scattering is weak, the source distribution is independent of the scattered field and a holographic reconstruction (or in fact any far-field optical imaging system) behaves as a 3D linear shift invariant filter applied to the refractive index contrast (which effectively defines the object). We go on to consider tomographic techniques that synthesise images from recordings of the scattered field using different illumination conditions. In our analysis we compare the 3D response of monochromatic optical tomography with the 3D imagery offered by confocal microscopy and scanning white light interferometry (using with quassi-monochromatic illumination) and explain the circumstances in which these approaches are equivalent. Finally, we consider the 3D response of polychromatic optical tomography and in particular the response of spectral optical coherence tomography and scanning white light interferometry

Considerations in Determining the Cost of Measurement Uncertainty Associated with Dimensional Tolerances Verification

The verification of compliance with a design specification in manufacturing requires the use of metrological instruments to check if the magnitude associated with the design specification is or not according with tolerance range. Such instrumentation and their use during the measurement process, has associated an uncertainty of measurement whose value must be related to the value of tolerance tested. Most papers dealing jointly tolerance and measurement uncertainties are mainly focused on the establishment of a relationship uncertainty-tolerance without paying much attention to the impact from the standpoint of process cost. This paper analyzes the cost-measurement uncertainty, considering uncertainty as a productive factor in the process outcome. This is done starting from a cost-tolerance model associated with the process. By means of this model the existence of a measurement uncertainty is calculated in quantitative terms of cost and its impact on the process is analyzed

An Alternative Method to Achieve Metrological Confirmation in Measurement Processes

Metrological confirmation process must be designed and implemented to ensure that metrological characteristics of the measurement system meet metrological requirements of the measurement process. The aim of this paper is to present an alternative method to the traditional metrological requirements about the relationship between tolerance and measurement uncertainty, to develop such confirmation processes. The proposed way to metrological confirmation considers a given inspection task of the measurement process into the manufacturing system, and it is based on the Index of Contamination of the Capability, ICC. Metrological confirmation process is then developed taking into account the producer risks and economic considerations on this index. As a consequence, depending on the capability of the manufacturing process, the measurement system will be or will not be in adequate state of metrological confirmation for the measurement process

Comparative Analysis of Tolerances Allocation in Mechanical Assemblies based on Cost-tolerance Curves

El presente trabajo propone un método para la determinación de los valores de las tolerancias individuales de las piezas que forman un conjunto ensamblado a partir de valores de tolerancias especificados en el conjunto final, optimizando el coste total de fabricación de las piezas individuales a partir de funciones de coste-tolerancia basadas en el proceso de fabricación de cada una de ellas. Para ello se parte de los principales trabajos desarrollados en la línea de asignación de tolerancias y se realiza la propuesta del modelo de trabajo, basado en la optimización de costes a partir de la aplicación del método de los multiplicadores de Lagrange a diversas curvas de coste-toleranci

Análisis Preliminar de la Influencia del Proceso de Torneado en la vida a fatiga de la Aleación de Aluminio UNS A92024-T351

Generalmente los elementos estructurales metálicos de las aeronaves se ubican en zonas de carga crítica, en la mayoría de los casos, estos elementos son conformados mediante procesos de mecanizado. La vida a fatiga de estos componentes es una propiedad dinámica muy importante que puede verse intensamente afectada por las condiciones superficiales producidas durante el proceso de mecanizado. En este trabajo se lleva a cabo un primer estudio de la influencia de los parámetros de corte en la resistencia a la fatiga de piezas torneadas de la aleación de aluminio aeronáutico UNS A92024-T351. Se ha prestado especial atención a la relación con el acabado superficial evaluado a partir de la rugosidad media aritmétic

Carcinoma broncogénico escamocelular con afectación pericárdica como única metástasis a distancia

Squamous cell carcinoma of the lung causes distant metastases, rarely to the heart, causing pericardial effusion with evolution to cardiac tamponade and even death. We present the case of a middle-aged man who came to the emergency room due to chest pain with an incidental finding of a lesion at the level of the right lower lobe (LID) on the chest X-ray, during his study a single cardiac metastasis was observed as the only one Clinical manifestation of pericardial effusion without hemodynamic affectation, pharmacological treatment was started due to the diagnosis of squamous cell carcinoma, known before the appearance of the effusion, and he was referred to Oncology for chemotherapy treatment with improvement of the same without the need for invasive techniques such as pericardiocentesis or pericardiectomy. With this case, we observe the rarity of the pericardial effusion caused by the only metastasis of the patient from a lung carcinoma and its evolution without invasive treatments.El carcinoma escamocelular de pulmón ocasiona metástasis a distancia, rara vez al corazón provocando derrame pericárdico con evolución a taponamiento cardíaco e incluso la muerte. Se presenta el caso de un varón de mediana edad que acudió a Urgencias por dolor torácico con hallazgo incidental de una lesión a nivel de lóbulo inferior derecho (LID) en la radiografía de tórax, durante su estudio se objetiva una metástasis única cardíaca y como única manifestación clínica derrame pericárdico sin afectación hemodinámica, se inició tratamiento farmacológico ante el diagnóstico de carcinoma escamocelular, conocido antes de la aparición del derrame, y fue derivado a Oncología para tratamiento quimioterápico con mejoría del mismo sin necesidad de técnicas invasivas como pericardiocentesis o pericardiectomía. Con este caso observamos la rareza del derrame pericárdico provocado por la única metástasis del paciente de un carcinoma de pulmón y la evolución del mismo sin tratamientos invasivos

Influence of the Lubrication Conditions on the Surface Finish of Turned Aeronautical Aluminium Alloys. A preliminary Study

Nowadays, one of the main objectives that affects the development of any new product is the respect for the environment. Until the late 80's, the development and manufacture of the most of the product were aimed to achieve maximum quality in time and costs with environmental issues relegated to secondary importance. On the other hand, in the 90's, the pressure from factors such as markets, financial and legislative factors, led to environmental considerations being taken into account. In this context, the current aeronautical industry strategies are based on the search for economic, environmental and energy efficiency considerations for all the processes involved in the aircraft manufacturing

Synthesis and characterization of fluorescent hollow silica nanoparticles: Control of size and metal incorporation for several nanotechnology applications

En el mundo de los nanomateriales la sílice es uno de los compuestos mas estudiados debido a sus propiedades y la versatilidad que ofrece en cuanto aplicaciones. En este proyecto se desarrolla un nuevo método de obtención de sílice funcionalizada con moléculas fluorescentes y nanoparticulas metálicas lo cual le confiere al material nuevas propiedades que lo hacen válido para uso como marcadores, catálisis, aplicaciones biómedicas..

Atmospheric modelling of Tritium forms transport: review of capabilities and R&D needs for the assessment of fusion facilities environmental impact

Comunicación presentada en: 38ª Reunión Anual de la Sociedad Nuclear Española celebrada del 17 al 19 de octubre de 2012 en Cáceres.This work models in detail the dispersion of tritium forms and dosimetric impact of selected environmental patterns both inland and in-sea using real topography and forecast meteorological data-fields (ECMWF/FLEXPART). We explore specific values of this ratio in different levels and we examine the influence of meteorological conditions in the HTO behavior for 24 hours. For this purpose we have used a tool which consists on a coupled Lagrangian ECMWF/FLEXPART model useful to follow real time releases of tritium at 10, 30 and 60 meters together with hourly observations of wind (and in some cases precipitations) to provide a short-range approximation of tritium cloud behavior. We have assessed inhalation doses. And also HTO/HT ratios in a representative set of cases during winter 2010 and spring 2011 for the 3 air levels