Design and implementation of an electro-optical backplane with pluggable in-plane connectors

The design, implementation and characterisation of an electro-optical backplane and an active pluggable in-plane optical connector technology is presented. The connection architecture adopted allows line cards to be mated to and unmated from a passive electro-optical backplane with embedded polymeric waveguides. The active connectors incorporate a photonics interface operating at 850 nm and a mechanism to passively align the interface to the optical waveguides embedded in the backplane. A demonstration platform has been constructed to assess the viability of embedded electro-optical backplane technology in dense data storage systems. The demonstration platform includes four switch cards, which connect both optically and electronically to the electro-optical backplane in a chassis. These switch cards are controlled by a single board computer across a Compact PCI bus on the backplane. The electrooptical backplane is comprised of copper layers for power and low speed bus communication and one polymeric optical layer, wherein waveguides have been patterned by a direct laser writing scheme. The optical waveguide design includes densely arrayed multimode waveguides with a centre to centre pitch of 250μm between adjacent channels, multiple cascaded waveguide bends, non-orthogonal crossovers and in-plane connector interfaces. In addition, a novel passive alignment method has been employed to simplify high precision assembly of the optical receptacles on the backplane. The in-plane connector interface is based on a two lens free space coupling solution, which reduces susceptibility to contamination. Successful transfer of 10.3 Gb/s data along multiple waveguides in the electro-optical backplane has been demonstrated and characterised

Epidemiology of Clostridium difficile -associated disease at University Hospital Basel including molecular characterisation of the isolates 2006-2007

A prospective study was conducted during a one-year period between 2006 and 2007 to describe the epidemiology of Clostridium difficile-associated disease (CDAD) at University Hospital Basel, Switzerland (UHBS) and to determine phenotypic and genotypic features of C. difficile strains isolated at the Microbiology Laboratory UHBS including strains from regional non-university hospitals. We prospectively identified 78CDAD cases at UHBS with an incidence of 2.65/1,000 hospitalised patients or 2.3/10,000 patient-days. Sixteen patients (20.5%) were infected with clindamycin-resistant strains of PCR-ribotype 027 during an outbreak at the geriatric hospital. Among 124 single-patient isolates, 28 (22.6%) were resistant to moxifloxacin and 34 (27.4%) were resistant to clindamycin, but all remained susceptible to metronidazole and vancomycin. Of 102 toxigenic isolates, 19 (18.7%) had an 18-bp deletion in the tcdC gene, eight (7.8%) a 39-bp deletion, and one (1.0%) a 54-bp deletion. Genes for binary toxin were present in 27 (21.8%). PCR-ribotype 027 was associated with older age (median age 83.5 vs. 65.5years, p < 0.0001) and longer duration of hospitalisation before onset of disease (median 15.5 vs. 9days, p = 0.014) with a trend towards higher crude mortality, more severe disease, and previous use of macrolides compared to ribotype non-027. Overall, severe disease correlated with use of a nasogastric tube and surprisingly shorter duration of hospitalisation before onset of disease. Today, laboratory-based and epidemiological surveillance systems are required to monitor CDAD cases and emergence of new epidemic strain

Highly Effective Regimen for Decolonization of Methicillin-Resistant Staphylococcus aureus Carriers

Objective. To evaluate the efficacy of a standardized regimen for decolonization of methicillin-resistant Staphylococcus aureus (MRSA) carriers and to identify factors influencing decolonization treatment failure. Design. Prospective cohort study from January 2002 to April 2007, with a mean follow-up period of 36 months. Setting. University hospital with 750 beds and 27,000 admissions/year. Patients. Of 94 consecutive hospitalized patients with MRSA colonization or infection, 32 were excluded because of spontaneous loss of MRSA, contraindications, death, or refusal to participate. In 62 patients, decolonization treatment was completed. At least 6 body sites were screened for MRSA (including by use of rectal swabs) before the start of treatment. Interventions. Standardized decolonization treatment consisted of mupirocin nasal ointment, chlorhexidine mouth rinse, and full-body wash with chlorhexidine soap for 5 days. Intestinal and urinary-tract colonization were treated with oral vancomycin and cotrimoxazole, respectively. Vaginal colonization was treated with povidone-iodine or, alternatively, with chlorhexidine ovula or octenidine solution. Other antibiotics were added to the regimen if treatment failed. Successful decolonization was considered to have been achieved if results were negative for 3 consecutive sets of cultures of more than 6 screening sites. Results. The mean age (± standard deviation [SD]) age of the 62 patients was 66.2 ± 19 years. The most frequent locations of MRSA colonization were the nose (42 patients [68%]), the throat (33 [53%]), perianal area (33 [53%]), rectum (36 [58%]), and inguinal area (30 [49%]). Decolonization was completed in 87% of patients after a mean (±SD) of 2.1 ± 1.8 decolonization cycles (range, 1-10 cycles). Sixty-five percent of patients ultimately required peroral antibiotic treatment (vancomycin, 52%; cotrimoxazole, 27%; rifampin and fusidic acid, 18%). Decolonization was successful in 54 (87%) of the patients in the intent-to-treat analysis and in 51 (98%) of 52 patients in the on-treatment analysis. Conclusion. This standardized regimen for MRSA decolonization was highly effective in patients who completed the full decolonization treatment cours

Highly effective regimen for decolonization of methicillin-resistant Staphylococcus aureus carriers

OBJECTIVE: To evaluate the efficacy of a standardized regimen for decolonization of methicillin-resistant Staphylococcus aureus (MRSA) carriers and to identify factors influencing decolonization treatment failure. DESIGN: Prospective cohort study from January 2002 to April 2007, with a mean follow-up period of 36 months. SETTING: University hospital with 750 beds and 27,000 admissions/year. PATIENTS: Of 94 consecutive hospitalized patients with MRSA colonization or infection, 32 were excluded because of spontaneous loss of MRSA, contraindications, death, or refusal to participate. In 62 patients, decolonization treatment was completed. At least 6 body sites were screened for MRSA (including by use of rectal swabs) before the start of treatment. INTERVENTIONS: Standardized decolonization treatment consisted of mupirocin nasal ointment, chlorhexidine mouth rinse, and full-body wash with chlorhexidine soap for 5 days. Intestinal and urinary-tract colonization were treated with oral vancomycin and cotrimoxazole, respectively. Vaginal colonization was treated with povidone-iodine or, alternatively, with chlorhexidine ovula or octenidine solution. Other antibiotics were added to the regimen if treatment failed. Successful decolonization was considered to have been achieved if results were negative for 3 consecutive sets of cultures of more than 6 screening sites. RESULTS: The mean age (+/- standard deviation [SD]) age of the 62 patients was 66.2 +/- 19 years. The most frequent locations of MRSA colonization were the nose (42 patients [68%]), the throat (33 [53%]), perianal area (33 [53%]), rectum (36 [58%]), and inguinal area (30 [49%]). Decolonization was completed in 87% of patients after a mean (+/-SD) of 2.1 +/- 1.8 decolonization cycles (range, 1-10 cycles). Sixty-five percent of patients ultimately required peroral antibiotic treatment (vancomycin, 52%; cotrimoxazole, 27%; rifampin and fusidic acid, 18%). Decolonization was successful in 54 (87%) of the patie in the intent-to-treat analysis and in 51 (98%) of 52 patients in the on-treatment analysis. CONCLUSION: This standardized regimen for MRSA decolonization was highly effective in patients who completed the full decolonization treatment course

Not All Patients with Vancomycin-Resistant Enterococci Need To Be Isolated

Background. Vancomycin-resistant enterococci (VRE) have triggered multiple outbreaks. However, VRE of genotype vanC appear not to be associated with outbreaks. The goal of this study was to estimate the risk of bloodstream infections in patients colonized with VRE of genotype vanC who received care from a bone marrow transplant unit for patients with leukemia, where only standard precautions were implemented for VRE of genotype vanC during the last 9 years. Methods. Since 2000, all patients in the bone marrow transplant unit underwent routine VRE rectal screening, data were prospectively entered in a database, and isolates were molecularly characterized. Infection control policy required contact isolation for patients infected with VRE of genotype vanA or vanB but only standard precautions for patients infected with VRE of genotype vanC. Results. From January 2000 to July 2008, 290 isolates of VRE of genotype vanC obtained from 273 different patients were identified, with an incidence of 25-43 isolates/year. Of 290 isolates, 285 (98%) were identified in rectal screening swabs, 5 were from other body sites, and none required specific treatment. During the entire study period, only 1 case of bloodstream infection was detected, reflecting an incidence of 1 (0.4%) of the 273 patients, or <0.2 cases per 1000 patient-days. No outbreaks were recorded. Conclusions. These data provide strong evidence that carriers of VRE of genotype vanC do not require contact isolation, thereby saving resources and potentially improving patient care. The genotype should be routinely determined in areas with a high prevalence of VRE of genotype van

The genus Borrelia reloaded

The genus Borrelia, originally described by Swellengrebel in 1907, contains tick- or louse-transmitted spirochetes belonging to the relapsing fever (RF) group of spirochetes, the Lyme borreliosis (LB) group of spirochetes and spirochetes that form intermittent clades. In 2014 it was proposed that the genus Borrelia should be separated into two genera; Borrelia Swellengrebel 1907 emend. Adeolu and Gupta 2014 containing RF spirochetes and Borreliella Adeolu and Gupta 2014 containing LB group of spirochetes. In this study we conducted an analysis based on a method that is suitable for bacterial genus demarcation, the percentage of conserved proteins (POCP). We included RF group species, LB group species and two species belonging to intermittent clades, Borrelia turcica Güner et al. 2004 and Candidatus Borrelia tachyglossi Loh et al. 2017. These analyses convincingly showed that all groups of spirochetes belong into one genus and we propose to emend, and re-unite all groups in, the genus Borrelia

Purification, characterization, and cloning of a bifunctional molybdoenzyme with hydratase and alcohol dehydrogenase activity

A bifunctional hydratase/alcohol dehydrogenase was isolated from the cyclohexanol degrading bacterium Alicycliphilus denitrificans DSMZ 14773. The enzyme catalyzes the addition of water to α,β-unsaturated carbonyl compounds and the subsequent alcohol oxidation. The purified enzyme showed three subunits in SDS gel, and the gene sequence revealed that this enzyme belongs to the molybdopterin binding oxidoreductase family containing molybdopterins, FAD, and iron-sulfur clusters

Wafer-scale epitaxial modulation of quantum dot density

Precise control of the properties of semiconductor quantum dots (QDs) is vital for creating novel devices for quantum photonics and advanced opto-electronics. Suitable low QD-densities for single QD devices and experiments are challenging to control during epitaxy and are typically found only in limited regions of the wafer. Here, we demonstrate how conventional molecular beam epitaxy (MBE) can be used to modulate the density of optically active QDs in one- and two- dimensional patterns, while still retaining excellent quality. We find that material thickness gradients during layer-by-layer growth result in surface roughness modulations across the whole wafer. Growth on such templates strongly influences the QD nucleation probability. We obtain density modulations between 1 and 10 QDs/µm2 and periods ranging from several millimeters down to at least a few hundred microns. This method is universal and expected to be applicable to a wide variety of different semiconductor material systems. We apply the method to enable growth of ultra-low noise QDs across an entire 3-inch semiconductor wafer

Wafer-Scale Epitaxial Modulation of Quantum Dot Density

Precise control of the properties of semiconductor quantum dots (QDs) is vital for creating novel devices for quantum photonics and advanced opto-electronics. Suitable low QD-density for single QD devices and experiments are challenging to control during epitaxy and are typically found only in limited regions of the wafer. Here, we demonstrate how conventional molecular beam epitaxy (MBE) can be used to modulate the density of optically active QDs in one- and two- dimensional patterns, while still retaining excellent quality. We find that material thickness gradients during layer-by-layer growth result in surface roughness modulations across the whole wafer. Growth on such templates strongly influences the QD nucleation probability. We obtain density modulations between 1 and 10 QDs/${\mu}m^{2}$ and periods ranging from several millimeters down to at least a few hundred microns. This novel method is universal and expected to be applicable to a wide variety of different semiconductor material systems. We apply the method to enable growth of ultra-low noise QDs across an entire 3-inch semiconductor wafer