The Suess effect in Fiji coral δ13C and its potential as a tracer of anthropogenic CO2 uptake

In the context of increasing anthropogenic CO2 emissions, determining the rate of oceanic CO2 uptake is of high interest. Centennial-scale changes in δ13C of the surface water dissolved inorganic carbon (DIC) reservoir have been shown to be influenced by the carbon isotopic composition of atmospheric CO2. However, the availability of direct oceanic δ13C measurements is limited and methods for reconstructing past δ13C variability of the oceanic DIC are needed. Geochemical reconstructions of DIC variability can help in understanding how the ocean has reacted to historical changes in the carbon cycle. This study explores the potential of using temporal variations in δ13C measured in five Fijian Porites corals for reconstructing oceanic δ13C variability. A centennial-scale decreasing δ13C trend is observed in these Fiji corals. Other studies have linked similar decreasing δ13C trends to anthropogenic changes in the atmospheric carbon reservoir (the “13C Suess effect”). We conclude that solar irradiance is the factor influencing the δ13C cycle on a seasonal scale, however it is not responsible for the centennial-scale decreasing δ13C trend. In addition, variations in skeletal extension rate are not found to account for centennial-scale δ13C variability in these corals. Rather, we found that water depth at which a Fijian Porites colony calcifies influences both δ13C and extension rate mean values. The water depth-δ13C relationship induces a dampening effect on the centennial-scale decreasing δ13C trend. We removed this “water depth effect” from the δ13C composite, resulting in a truer representation of δ13C variability of the Fiji surface water DIC (δ13CFiji-DIC). The centennial-scale trend in this Fiji coral composite δ13CFiji-DIC time-series shares similarities with atmospheric δ13CCO2, implicating the 13C Suess effect as the source of the this coral δ13C trend. Additionally, our study finds that the δ13C variability between the atmosphere and the ocean in this region is not synchronous; the coral δ13C response is delayed by ~ 10 years. This agrees with the previously established model of isotopic disequilibrium between atmospheric δ13CCO2 and oceanic surface water DIC

Fit for purpose? Pattern cutting and seams in wearables development

This paper describes how a group of practitioners and researchers are working across disciplines at Nottingham Trent University in the area of Technical Textiles. It introduces strands of ongoing enquiry centred around the development and application of stretch sensors on the body, focusing on how textile and fashion knowledge are being reflexively revealed in the collaborative development of seamful wearable concepts, and on the tensions between design philosophies as revealed by definitions of purpose. We discuss the current research direction of the Aeolia project, which seeks to exploit the literal gaps found in pattern cutting for fitted stretch garments towards experiential forms and potential interactions. Normative goals of fitness for purpose and seamlessness are interrogated and the potential for more integrated design processes, which may at first appear ‘upside down’, is discussed

Organic phosphonium salts

Not availabl

Communication style and exercise compliance in physiotherapy (CONNECT). A cluster randomized controlled trial to test a theory-based intervention to increase chronic low back pain patients’ adherence to physiotherapists’ recommendations: study rationale, design, and methods

Physical activity and exercise therapy are among the accepted clinical rehabilitation guidelines and are recommended self-management strategies for chronic low back pain. However, many back pain sufferers do not adhere to their physiotherapist’s recommendations. Poor patient adherence may decrease the effectiveness of advice and home-based rehabilitation exercises. According to self-determination theory, support from health care practitioners can promote patients’ autonomous motivation and greater long-term behavioral persistence (e.g., adherence to physiotherapists’ recommendations). The aim of this trial is to assess the effect of an intervention designed to increase physiotherapists’ autonomy-supportive communication on low back pain patients’ adherence to physical activity and exercise therapy recommendations. \ud \ud This study will be a single-blinded cluster randomized controlled trial. Outpatient physiotherapy centers (N =12) in Dublin, Ireland (population = 1.25 million) will be randomly assigned using a computer-generated algorithm to either the experimental or control arm. Physiotherapists in the experimental arm (two hospitals and four primary care clinics) will attend eight hours of communication skills training. Training will include handouts, workbooks, video examples, role-play, and discussion designed to teach physiotherapists how to communicate in a manner that promotes autonomous patient motivation. Physiotherapists in the waitlist control arm (two hospitals and four primary care clinics) will not receive this training. Participants (N = 292) with chronic low back pain will complete assessments at baseline, as well as 1 week, 4 weeks, 12 weeks, and 24 weeks after their first physiotherapy appointment. Primary outcomes will include adherence to physiotherapy recommendations, as well as low back pain, function, and well-being. Participants will be blinded to treatment allocation, as they will not be told if their physiotherapist has received the communication skills training. Outcome assessors will also be blinded. \ud \ud We will use linear mixed modeling to test between arm differences both in the mean levels and the rates of change of the outcome variables. We will employ structural equation modeling to examine the process of change, including hypothesized mediation effects. \ud \ud This trial will be the first to test the effect of a self-determination theory-based communication skills training program for physiotherapists on their low back pain patients’ adherence to rehabilitation recommendations. Current Controlled Trials ISRCTN63723433\u

Crafting the Composite Garment: The role of hand weaving in digital creation

There is a growing body of practice-led textile research, focused on how digital technologies can inform new design and production strategies that challenge and extend the field. To date, this research has emphasized a traditional linear transition between hand and digital production; with hand production preceding digital as a means of acquiring the material and process knowledge required to negotiate technologies and conceptualize designs. This paper focuses on current Doctoral research into the design and prototyping of 3D woven or 'composite' garments and how the re-learning, or reinterpreting, of hand weaving techniques in a digital Jacquard format relies heavily on experiential knowledge of craft weaving skills. Drawing parallels between hand weaving and computer programming, that extend beyond their shared binary (pixel-based) language, the paper discusses how the machine-mediated experience of hand weaving can prime the weaver to ‘think digitally’ and make the transition to digital production. In a process where the weaver acts simultaneously as designer, constructor and programmer, the research explores the inspiring, but often indefinable space between craft and digital technology by challenging the notion that 'the relationship between hand, eye and material’ naturally precedes the use of computing (Harris 2012: 93). This is achieved through the development of an iterative working methodology that encompasses a cycle of transitional development, where hand weaving and digital processes take place in tandem, and techniques and skills are reinterpreted to exploit the advantages and constraints of each construction method. It is argued that the approach challenges the codes and conventions of computer programming, weaving and fashion design to offer a more sustainable clothing solution

Arduous implementation: Does the Normalisation Process Model explain why it's so difficult to embed decision support technologies for patients in routine clinical practice

Background: decision support technologies (DSTs, also known as decision aids) help patients and professionals take part in collaborative decision-making processes. Trials have shown favorable impacts on patient knowledge, satisfaction, decisional conflict and confidence. However, they have not become routinely embedded in health care settings. Few studies have approached this issue using a theoretical framework. We explained problems of implementing DSTs using the Normalization Process Model, a conceptual model that focuses attention on how complex interventions become routinely embedded in practice.Methods: the Normalization Process Model was used as the basis of conceptual analysis of the outcomes of previous primary research and reviews. Using a virtual working environment we applied the model and its main concepts to examine: the 'workability' of DSTs in professional-patient interactions; how DSTs affect knowledge relations between their users; how DSTs impact on users' skills and performance; and the impact of DSTs on the allocation of organizational resources.Results: conceptual analysis using the Normalization Process Model provided insight on implementation problems for DSTs in routine settings. Current research focuses mainly on the interactional workability of these technologies, but factors related to divisions of labor and health care, and the organizational contexts in which DSTs are used, are poorly described and understood.Conclusion: the model successfully provided a framework for helping to identify factors that promote and inhibit the implementation of DSTs in healthcare and gave us insights into factors influencing the introduction of new technologies into contexts where negotiations are characterized by asymmetries of power and knowledge. Future research and development on the deployment of DSTs needs to take a more holistic approach and give emphasis to the structural conditions and social norms in which these technologies are enacte

Photochemical dihydrogen production using an analogue of the active site of [NiFe] hydrogenase

The photoproduction of dihydrogen (H2) by a low molecular weight analogue of the active site of [NiFe] hydrogenase has been investigated by the reduction of the [NiFe2] cluster, 1, by a photosensitier PS (PS = [ReCl(CO)3(bpy)] or [Ru(bpy)3][PF6]2). Reductive quenching of the 3MLCT excited state of the photosensitiser by NEt3 or N(CH2CH2OH)3 (TEOA) generates PS•−, and subsequent intermolecular electron transfer to 1 produces the reduced anionic form of 1. Time-resolved infrared spectroscopy (TRIR) has been used to probe the intermediates throughout the reduction of 1 and subsequent photocatalytic H2 production from [HTEOA][BF4], which was monitored by gas chromatography. Two structural isomers of the reduced form of 1 (1a•− and 1b•−) were detected by Fourier transform infrared spectroscopy (FTIR) in both CH3CN and DMF (dimethylformamide), while only 1a•− was detected in CH2Cl2. Structures for these intermediates are proposed from the results of density functional theory calculations and FTIR spectroscopy. 1a•− is assigned to a similar structure to 1 with six terminal carbonyl ligands, while calculations suggest that in 1b•− two of the carbonyl groups bridge the Fe centres, consistent with the peak observed at 1714 cm−1 in the FTIR spectrum for 1b•− in CH3CN, assigned to a ν(CO) stretching vibration. The formation of 1a•− and 1b•− and the production of H2 was studied in CH3CN, DMF and CH2Cl2. Although the more catalytically active species (1a•− or 1b•−) could not be determined, photocatalysis was observed only in CH3CN and DMF

What punishment expresses

In this article, I consider the question of what punishment expresses and propose a way of approaching the question that overcomes problems in both psychosocial and philosophical expressivist traditions. The problem in both traditions is, I suggest, the need for an adequate moral – neither moralizing nor reductive – psychology, and I argue that Melanie Klein’s work offers such a moral psychology. I offer a reconstruction of Klein’s central claims and begin to sketch some of its potential implications for an expressive account of punishment. I outline a Kleinian interpretation of modern punishment’s expression as of an essentially persecutory nature but also include depressive realizations that have generally proved too difficult for liberal modernity to work through successfully, and the recent ‘persecutory turn’ is a defence against such realizations. I conclude by considering the wider philosophical significance of a Kleinian account for the expressivist theory of punishment

Missing Links: Referrer Behavior and Job Segregation

How does referral recruitment contribute to job segregation, and what can organizations do about it? Current theory on network effects in the labor market emphasizes the job-seeker perspective, focusing on the segregated nature of job-seekers’ information and contact networks, and leaves little role for organizational influence. But employee referrals are necessarily initiated from within a firm by referrers. We argue that referrer behavior is the missing link that can help organizations manage the segregating effects of referring. Adopting the referrer’s perspective of the process, we develop a computational model which integrates a set of empirically documented referrer behavior mechanisms gleaned from extant organizational case studies. Using this model, we compare the segregating effects of referring when these behaviors are inactive to the effects when the behaviors are active. We show that referrer behaviors substantially boost the segregating effects of referring. This impact of referrer behavior presents an opportunity for organizations. Contrary to popular wisdom, we show that organizational policies designed to influence referrer behaviors can mitigate most if not all of the segregating effects of referring

Sensitive X-ray Detectors Synthesised from CsPbBr3

The materials used in detection of high energy photons are of primary importance in the construction of efficient, cost effective and sensitive detectors. Current research into Perovskites for solar cell technology has stimulated interest in their potential alternative uses, one of which is in direct photon conversion radiation detectors, owed primarily to their high-Z elemental composition twinned with exceptional charge carrier transport properties. Here, the Perovskite CsPbBr 3 has been synthesised through solution growth. The raw CsPbBr 3 was a granular powder which was formed into disks of 8 mm diameter and 1-2 mm thickness by two methods: 1). the powders were pressed into pellets using a hydraulic press or 2). sealed in a quartz ampoule under vacuum and then melted and quenched to form a polycrystalline solid which was cut to size. Metallic contacts were deposited on the front and back faces to permit charge collection. The results from the pressed devices are promising, particularly given that the production method is cost effective, repeatable and scalable. The solid-from-melt devices show similar performance but further development is required to optimise the production method