Purification and biochemical characterization of a serine alkaline protease TC4 from a new isolated Bacillus alcalophilus TCCC11004 in detergent formulations

An extracellular alkaline protease producing strain was isolated from alkaline soil and identified as Bacillus alcalophilus TCCC11004 on the basis of 16S rDNA gene sequencing and biochemical properties. The most appropriate medium for the protease production was composed of (g/l): maltodextrin 110, yeast extract 17.5, cotton seed meal 29.3, K2HPO4 18, trisodium citrate 3.3 and CaCl2 2.6. The alkaline protease TC4 was purified from the culture supernatant by ammonium sulfate precipitation, Sephadex G-75 gel filtration and SP-Sepharose HP ion exchange chromatography, with a 6.8 fold increase in specific activity and 15.2% recovery. The molecular weight was estimated to be 26 kDa on SDS-PAGE. The protease was highly active from pH 9.0-12.0 with an optimal at pH 11.0. It was active at 30 - 60°C and exhibited maximal activity at 50°C. The thermostability of the protease was increased by the addition of CaCl2. It retained 70 and 81% of its initial activity after heating for 2 h at 50°C, in the absence or presence of 2 mM CaCl2, respectively. The enzyme was inactivated by diisopropyl fluorophosphate and phenylmethylsulfonyl fluoride, suggesting that it is a serine protease. The protease was stable in 0.5% SDS and retained 70.3% of its initial activity after 1 h of incubation. It was active in the presence of 3% Triton X-100 with 100% activity and stable towards oxidizing agent with 69.2% activity in the presence of 1% H2O2. The enzyme showed excellent compatibility with commercial detergents such as TaiZi, BiLang, DiaoPai and TianQing, retaining more than 90% of its initial activity in the tested detergents after 1 h of preincubation at 40°C.Keywords: Serine alkaline protease, Bacillus alcalophilus, stability, detergent compatibility

Regulatory T cells in rheumatoid arthritis showed increased plasticity toward Th17 but retained suppressive function in peripheral blood

OBJECTIVE: Regulatory T cells (Tregs) with the plasticity of producing proinflammatory cytokine IL-17 have been demonstrated under normal and pathogenic conditions. However, it remains unclear whether IL-17-producing Tregs lose their suppressive functions because of their plasticity toward Th17 in autoimmunity. The aim of this study was to investigate IL-17-producing Tregs from patients with rheumatoid arthritis (RA), and characterise their regulatory capacity and clinical significance. METHODS: Foxp3 and IL-17 coexpression were evaluated in CD4 T lymphocytes from RA patients. An in vitro T cell polarisation assay was performed to investigate the role of proinflammatory cytokines in IL-17-producing Treg polarisation. The suppressive function of IL-17-producing Tregs in RA was assessed by an in vitro suppression assay. The relationship between this Treg subset and clinical features in RA patients was analysed using Spearman's rank correlation test. RESULTS: A higher frequency of IL-17-producing Tregs was present in the peripheral blood of RA patients compared with healthy subjects. These cells from peripheral blood showed phenotypic characteristics of Th17 and Treg cells, and suppressed T cell proliferation in vitro. Tregs in RA synovial fluid lost suppressive function. The Th17 plasticity of Tregs could be induced by IL-6 and IL-23. An increased ratio of this Treg subset was associated with decreased levels of inflammatory markers, including the erythrocyte sedimentation rate and C-reactive protein level, in patients with RA. CONCLUSIONS: Increased levels of IL-17-producing Tregs were identified in RA patients. This Treg subset with Th17 plasticity in peripheral blood retained suppressive functions and was associated with milder inflammatory conditions, suggesting that this Treg population works as a negative regulator in RA, but in RA synovial site it may be pathogenic.postprin

Computational Analysis and Prediction of the Binding Motif and Protein Interacting Partners of the Abl SH3 Domain

Protein-protein interactions, particularly weak and transient ones, are often mediated by peptide recognition domains, such as Src Homology 2 and 3 (SH2 and SH3) domains, which bind to specific sequence and structural motifs. It is important but challenging to determine the binding specificity of these domains accurately and to predict their physiological interacting partners. In this study, the interactions between 35 peptide ligands (15 binders and 20 non-binders) and the Abl SH3 domain were analyzed using molecular dynamics simulation and the Molecular Mechanics/Poisson-Boltzmann Solvent Area method. The calculated binding free energies correlated well with the rank order of the binding peptides and clearly distinguished binders from non-binders. Free energy component analysis revealed that the van der Waals interactions dictate the binding strength of peptides, whereas the binding specificity is determined by the electrostatic interaction and the polar contribution of desolvation. The binding motif of the Abl SH3 domain was then determined by a virtual mutagenesis method, which mutates the residue at each position of the template peptide relative to all other 19 amino acids and calculates the binding free energy difference between the template and the mutated peptides using the Molecular Mechanics/Poisson-Boltzmann Solvent Area method. A single position mutation free energy profile was thus established and used as a scoring matrix to search peptides recognized by the Abl SH3 domain in the human genome. Our approach successfully picked ten out of 13 experimentally determined binding partners of the Abl SH3 domain among the top 600 candidates from the 218,540 decapeptides with the PXXP motif in the SWISS-PROT database. We expect that this physical-principle based method can be applied to other protein domains as well

Onecut-dependent Nkx6.2 transcription factor expression is required for proper formation and activity of spinal locomotor circuits.

In the developing spinal cord, Onecut transcription factors control the diversification of motor neurons into distinct neuronal subsets by ensuring the maintenance of Isl1 expression during differentiation. However, other genes downstream of the Onecut proteins and involved in motor neuron diversification have remained unidentified. In the present study, we generated conditional mutant embryos carrying specific inactivation of Onecut genes in the developing motor neurons, performed RNA-sequencing to identify factors downstream of Onecut proteins in this neuron population, and employed additional transgenic mouse models to assess the role of one specific Onecut-downstream target, the transcription factor Nkx6.2. Nkx6.2 expression was up-regulated in Onecut-deficient motor neurons, but strongly downregulated in Onecut-deficient V2a interneurons, indicating an opposite regulation of Nkx6.2 by Onecut factors in distinct spinal neuron populations. Nkx6.2-null embryos, neonates and adult mice exhibited alterations of locomotor pattern and spinal locomotor network activity, likely resulting from defective survival of a subset of limb-innervating motor neurons and abnormal migration of V2a interneurons. Taken together, our results indicate that Nkx6.2 regulates the development of spinal neuronal populations and the formation of the spinal locomotor circuits downstream of the Onecut transcription factors

An evaluation of ultrasonic arrays for the static and dynamic measurement of wheel rail contact pressure and area

The interfacial contact conditions between a railway vehicle wheel and the rail are paramount to the lifespan, safety and smooth operation of any rail network. The wheel/rail interface contact pressure and area conditions have been estimated, calculated and simulated by industry and academia for many years, but a method of accurately measuring dynamic contact conditions has yet to be realised. Methods using pressure sensitive films and controlled air flow have been employed, but both are limited. Ultrasonic reflectometry is the term given to active ultrasonics in which an ultrasonic transducer is mounted on the outer surface of a component and a sound wave is generated. This ultrasonic wave packet propagates through the host medium and reflects off the contacting interface of interest. The reflected waveform is then detected and contact area and interfacial stiffness information can be extracted from the signal using the quasi-static spring model. Stiffness can be related to contact pressure by performing a simple calibration procedure. Previous contact pressure measurement work has relied on using a focusing transducer and a 2-dimensional scanning arrangement which results in a high resolution image of the wheel/rail contact, but is limited to static loading of a specimen cut from a wheel and rail. The work described in this paper has assessed the feasibility of measuring a dynamic wheel/rail contact patch using an array of 64 ultrasonic elements mounted in the rail. Each element is individually pulsed in sequence to build up a linear cross sectional pressure profile measurement of the interface. These cross-sectional, line measurements are then processed and collated resulting in a 2-dimensional contact pressure profile. Measurements have been taken at different speeds and loads

The amplifier effect: how Pin1 empowers mutant p53

Mutation of p53 occurs in 15 to 20% of all breast cancers, and with higher frequency in estrogen-receptor negative and high-grade tumors. Certain p53 mutations contribute to malignant transformation not only through loss of wild-type p53 but also through a gain of function of specific p53 mutations. How these hotspot mutations turn p53 from a tumor suppressor into an oncogene had until now remained incompletely understood. In an elegant paper published in the July 12 issue of Cancer Cell, Girardini and colleagues show how Pin1-mediated prolylisomerization, a regulatory mechanism intended by evolution to support p53's function as a guardian of the genome, can go haywire and accelerate malignant transformation when p53 carries a dominant-negative mutation

Real-time non-invasive measurement and monitoring of wheel-rail contact using ultrasonic reflectometry

Rail stress levels are vital to the lifespan of rail tracks, and are responsible for the safe operation and ride comfort of train services. In particular, wheel–rail contact stress is a dominating factor affecting wear, cracking, fatigue and failure of both wheel and rail. The wheel–rail interaction problem has long been investigated, yet detailed contact information on real cases remains obscure due to the interface complexity, including the varying wheel and rail profiles and lack of effective stress characterisation methods. Ultrasound image study, as an excellent non-destructive evaluation (NDE) method, is widely used in railway systems for defect detection, stress determination and rail profile checking. Specifically, ultrasonic reflectometry has proved successful in making static machine-element contact measurements. This article introduces a novel measuring method for both short-term and long-term dynamic wheel–rail contact monitoring purposes based on ultrasonic reflectometry. The method is investigated in detail, including the study of ultrasound propagation pathways in the rail, and the optimum placement of ultrasonic elements as well as actuator–receiver combinations. The proposed monitoring technique is expected to characterise and monitor the contact behaviour of operating high-speed rail system in real-time

Structure of hadron resonances with a nearby zero of the amplitude

We discuss the relation between the analytic structure of the scattering amplitude and the origin of an eigenstate represented by a pole of the amplitude.If the eigenstate is not dynamically generated by the interaction in the channel of interest, the residue of the pole vanishes in the zero coupling limit. Based on the topological nature of the phase of the scattering amplitude, we show that the pole must encounter with the Castillejo-Dalitz-Dyson (CDD) zero in this limit. It is concluded that the dynamical component of the eigenstate is small if a CDD zero exists near the eigenstate pole. We show that the line shape of the resonance is distorted from the Breit-Wigner form as an observable consequence of the nearby CDD zero. Finally, studying the positions of poles and CDD zeros of the KbarN-piSigma amplitude, we discuss the origin of the eigenstates in the Lambda(1405) region.Comment: 7 pages, 3 figures, v2: published versio

Wet Granular Materials

Most studies on granular physics have focused on dry granular media, with no liquids between the grains. However, in geology and many real world applications (e.g., food processing, pharmaceuticals, ceramics, civil engineering, constructions, and many industrial applications), liquid is present between the grains. This produces inter-grain cohesion and drastically modifies the mechanical properties of the granular media (e.g., the surface angle can be larger than 90 degrees). Here we present a review of the mechanical properties of wet granular media, with particular emphasis on the effect of cohesion. We also list several open problems that might motivate future studies in this exciting but mostly unexplored field.Comment: review article, accepted for publication in Advances in Physics; tex-style change

Central carbon metabolism in the progression of mammary carcinoma

There is a growing belief that the metabolic program of breast tumor cells could be a therapeutic target. Yet, without detailed information on central carbon metabolism in breast tumors it is impossible to know which metabolic pathways to target, and how their inhibition might influence different stages of breast tumor progression. Here we perform the first comprehensive profiling of central metabolism in the MCF10 model of mammary carcinoma, where the steps of breast tumor progression (transformation, tumorigenicity and metastasis) can all be examined in the context of the same genetic background. The metabolism of [U-13C]-glucose by a series of progressively more aggressive MCF10 cell lines was tracked by 2D NMR and mass spectrometry. From this analysis the flux of carbon through distinct metabolic reactions was quantified by isotopomer modeling. The results indicate widespread changes to central metabolism upon cellular transformation including increased carbon flux through the pentose phosphate pathway (PPP), the TCA cycle, as well as increased synthesis of glutamate, glutathione and fatty acids (including elongation and desaturation). The de novo synthesis of glycine increased upon transformation as well as at each subsequent step of breast tumor cell progression. Interestingly, the major metabolic shift in metastatic cells is a large increase in the de novo synthesis of proline. This work provides the first comprehensive view of changes to central metabolism as a result of breast tumor progression