ANÁLISE DE VIABILIDADE ECONÔMICA PARA IMPLANTAÇÃO DE CULTIVO DE EUCALIPTO EM UMA PEQUENA PROPRIEDADE RURAL

O eucalipto é uma alternativa para abastecimento das empresas de celulose e traz benefícios tanto para o produtor quanto para a comunidade.  O aumento da demanda por madeira gerou uma rápida aceleração no plantio de eucalipto por parte dos proprietários rurais. Grande parte dos pequenos plantios realizados nesse período foram realizados sem nenhuma técnica adequada para verificar a viabilidade do investimento. A análise de viabilidade de investimentos é uma ferramenta de grande importância para o investidor que pretende dispor recursos em um projeto com o objetivo de gerar riqueza/lucro. Este trabalho teve como objetivo fazer essa análise em uma pequena propriedade rural no município de Peçanha – MG em que seu proprietário possui a intenção de realizar o plantio de eucalipto para posterior produção de celulose. Para o estudo foram utilizadas as ferramentas de Valor Presente Líquido (VPL), Taxa Interna de Retorno (TIR) e payback descontado. Todos os indicativos foram favoráveis ao plantio. O estudo considerou o corte do eucalipto com 7 anos após o plantio. O VPL resultante foi de R$95.887,89, a TIR 32,30% e o payback descontado de 5,32 anos.  Os maiores custos foram orçados para o corte e transporte da madeira ao final do cultivo, e devido à baixa manutenção após os dois primeiros anos, o produtor considera que o investimento é adequado ao seu perfil mais conservador

Preliminary Assessment of the Chemical Stability of Dried Extracts from Guazuma ulmifolia Lam. (Sterculiaceae)

We report the results of a preliminary estimation of the stability of the dried extract from bark of Guazuma ulmifolia Lam. (“Mutamba”), with and without added colloidal silicon dioxide (CSD). The physical and chemical properties and the compatibility of CSD in the extract were evaluated for 21 days of storage under stress conditions of temperature (45 ± 2°C) and humidity (75 ± 5%). Thermogravimetry (TG) was supplemented using selective high-performance liquid chromatography (HPLC) for determination of stability of the characteristic constituents (chemical markers), namely, procyanidin B2 (PB2) and epicatechin (EP). The results showed that PB2 is an appropriate compound to be used as a chemical marker in the quality control of dried extracts of G. ulmifolia. The stress study showed that there was no significant difference between the two formulations. However, considering the TG data and the high temperatures involved, the results suggest that CSD increases the stability of the dried extract of G. ulmifolia

Productive and economic performance of feedlot young Nellore bulls fed whole oilseeds

ABSTRACT The effects of diets containing oilseeds were measured to evaluate the productive and economic parameters in the finishing of young, feedlot Nellore bulls. Twenty-four young Nellore bulls were used, with an initial body weight (BW) of 311.46±0.37 kg and 24 months of age, distributed into individual stalls ( 4 × 20 m) in a completely randomized design, totaling four treatments with six repetitions per treatment. Four diets (control, based on corn and soybean meal, and three diets containing cottonseed, soybean, and sunflower) were evaluated. Feed and orts were measured daily to calculate intake and costs. The dry matter intake of the control group was higher than soybean (10.64 kg/day), cotton (9.88 kg/day), and sunflower (9.30 kg/day) treatments, respectively. The cottonseed treatment showed the highest average neutral detergent fiber intake. There was a dietary effect of diets on average daily gain, total weight gain, and final weight. The soybean treatment showed the highest performance, total gain (232.55 kg), and final weight (544.38 kg). Oilseed intake can modify the fatty acids profile in the meat, decreasing its saturated fatty acid content. Whole soybean seed favors performance, improves feed efficiency, fatty acid profile, and fat distribution in the carcass, and can reduce production costs

The impact of surgical delay on resectability of colorectal cancer: An international prospective cohort study

AIM: The SARS-CoV-2 pandemic has provided a unique opportunity to explore the impact of surgical delays on cancer resectability. This study aimed to compare resectability for colorectal cancer patients undergoing delayed versus non-delayed surgery. METHODS: This was an international prospective cohort study of consecutive colorectal cancer patients with a decision for curative surgery (January-April 2020). Surgical delay was defined as an operation taking place more than 4 weeks after treatment decision, in a patient who did not receive neoadjuvant therapy. A subgroup analysis explored the effects of delay in elective patients only. The impact of longer delays was explored in a sensitivity analysis. The primary outcome was complete resection, defined as curative resection with an R0 margin. RESULTS: Overall, 5453 patients from 304 hospitals in 47 countries were included, of whom 6.6% (358/5453) did not receive their planned operation. Of the 4304 operated patients without neoadjuvant therapy, 40.5% (1744/4304) were delayed beyond 4 weeks. Delayed patients were more likely to be older, men, more comorbid, have higher body mass index and have rectal cancer and early stage disease. Delayed patients had higher unadjusted rates of complete resection (93.7% vs. 91.9%, P = 0.032) and lower rates of emergency surgery (4.5% vs. 22.5%, P < 0.001). After adjustment, delay was not associated with a lower rate of complete resection (OR 1.18, 95% CI 0.90-1.55, P = 0.224), which was consistent in elective patients only (OR 0.94, 95% CI 0.69-1.27, P = 0.672). Longer delays were not associated with poorer outcomes. CONCLUSION: One in 15 colorectal cancer patients did not receive their planned operation during the first wave of COVID-19. Surgical delay did not appear to compromise resectability, raising the hypothesis that any reduction in long-term survival attributable to delays is likely to be due to micro-metastatic disease

Cell therapy in an experimental model of pulmonary emphysema induced by cigarette smoke.

O enfisema pulmonar é caracterizado pela destruição das paredes alveolares, sendo a fumaça de cigarro o principal agente etiológico. Pretendeu-se, neste estudo, comparar os efeitos terapêuticos do transplante de células mononucleares da medula óssea (BMMC) e células mesenquimais (CTM) em animais com enfisema pulmonar induzido por exposição à fumaça de cigarro. Camundongos fêmeas da linhagem C57Bl6/J foram expostos à fumaça de cigarro durante 90 dias e, 21 dias após o término do período de exposição, receberam BMMC ou CTM derivadas da medula óssea de camundongos machos da linhagem C57Bl6/J, expressando a proteína GFP. As análises morfométricas mostraram que os tratamentos com BMMC e CTM foram eficientes na recuperação do parênquima pulmonar dos animais expostos à fumaça de cigarro. Testes de fluorescência direta e PCR mostraram a migração de BMMC e CTM para o pulmão. Desta forma, pode-se concluir que, morfologicamente, a terapia celular com BMMC ou CTM é eficaz no tratamento do enfisema pulmonar resultante da exposição à fumaça de cigarro em modelo animal.Pulmonary emphysema is characterized by destruction of alveolar walls, and the cigarette smoking is the main etiologic agent. It was intended in this study to compare the therapeutic effects of the transplantation of bone marrow mononuclear cells (BMMC) and mesenchymal stem cells (MSC) in animals with pulmonary emphysema induced by exposure to cigarette smoke. C57Bl6/J female mice were exposed to cigarette smoke for 90 days and 21 days after the end of the exposure time, received BMMC or MSC derived from bone marrow of C57Bl6/J male mice expressing the GFP protein. The morphometric analysis showed that treatments with BMMC and MSC were efficient in recovering the lung of animals exposed to cigarette smoke. Fluorescence and PCR tests showed the migration of BMMC and MSC to the lung. Thus, it is concluded the cell therapy with BMMC or CTM is morphologically effective in the treatment of pulmonary emphysema resulting from exposure to cigarette smoke in an animal model

Melhoria contínua de serviços prestados por academia de musculação em município da região do Vale do Aço-MG

O presente trabalho visa melhorar a qualidade do serviço prestado por uma academia localizada na região do Vale do Aço.&nbsp; Atualmente, as academias de ginástica oferecem não somente o serviço, mas também a possibilidade de uma boa qualidade de vida aos seus alunos. Portanto, é cada vez mais necessário ter a opinião deles com o intuito de aprimorar o que é oferecido para fidelizar esses clientes. Para isso, é comum o uso do modelo SERVQUAL para avaliar as expectativas e a realidade dos serviços prestados. A partir dele, são comparadas expectativas e percepções dos clientes em relação às cinco dimensões da qualidade: tangibilidade, responsabilidade, confiabilidade, empatia e garantia, realizada por meio de um questionário, gerando um gap de satisfação entre os respondentes. A pesquisa foi realizada com 60 clientes, com o auxílio do software Excel. Foram disponibilizados gaps individuais e as dimensões apresentadas individualmente estão em ordem decrescente: Responsabilidade (-0,64), Segurança e Empatia (-0,57), Aspectos Tangíveis (-0,56) e Confiabilidade (-0,55). Assim, destaca-se que cinco dimensões apresentam lacunas negativas, merecem atenção porque eles representam oportunidades para melhorar a prestação de serviços. Após a análise dos dados coletados e o diagnóstico dos pontos de insatisfação dos clientes, foram desenvolvidos planos de melhorias com o auxílio da ferramenta 5W2H para aumentar a satisfação dos visitantes do local

Evaluation of mechanical properties of dental feldsphatic porcelains for metal and zirconia core

Studies has been reported a significant incidence of chipping of the feldspathic porcelain veneer in zirconia-based restorations. The purpose of this study was to compare the three-point flexural strength (MPa), Weibull parameters, Vickers hardness (VHN) and Vickers indentation fracture toughness (MPa/mm(1/2)) in feldspatic porcelains for metal and for zirconia frameworks. Bar specimens were made with the porcelains e.MaxCeram (EM) and VitaVM9 (V9) for zirconia core, and Duceragold (DG) and VitaVMK95 (VK) for metal core (n = 15). Kruskal-Wallis and Dun test were used for statistical analysis. There was no significant difference (p=0.31) among the porcelains in the flexural strength (Median = 73.2; 74.6; 74.5; 74.4). Weibull calculation presented highest reliability for VK (10.8) followed by em (7.1), V9 (5.7) and DG (5.6). Vickers hardness test showed that em (536.3), V9 (579.9) and VK (522.1) had no difference and DG (489.6) had the lowest value (p<.001). The highest fracture toughness was to VK (1.77), DG (1.58) had an intermediate value while V9 (1.33) and em (1.18) had the lowest values (p<.001). Despite of the suitable flexural strength, reliability and high hardness, the porcelains used to zirconia-based fixed dental prostheses showed lower fracture toughness values