A development cooperation Erasmus Mundus partnership for capacity building in earthquake mitigation science and higher education

Successful practices have shown that a community’s capacity to manage and reduce its seismic risk relies on capitalization on policies, on technology and research results. An important role is played by education, than contribute to strengthening technical curricula of future practitioners and researchers through university and higher education programs. EUNICE is a European Commission funded higher education partnership for international development cooperation with the objective to build capacity of individuals who will operate at institutions located in seismic prone Asian Countries. The project involves five European Universities, eight Asian universities and four associations and NGOs active in advanced research on seismic mitigation, disaster risk management and international development. The project consists of a comprehensive mobility scheme open to nationals from Afghanistan, Bangladesh, China, Nepal, Pakistan, Thailand, Bhutan, India, Indonesia, Malaysia, Maldives, North Korea, Philippines, and Sri Lanka who plan to enroll in school or conduct research at one of five European partner universities in Italy, Greece and Portugal. During the 2010-14 time span a total number of 104 mobilities are being involved in scientific activities at the undergraduate, masters, PhD, postdoctoral and academic-staff exchange levels. Researchers, future policymakers and practitioners build up their curricula over a range of disciplines in the fields of earthquake engineering, seismology, disaster risk management and urban planning

EU-NICE, Eurasian University Network for International Cooperation in Earthquakes

Despite the remarkable scientific advancements of earthquake engineering and seismology in many countries, seismic risk is still growing at a high rate in the world’s most vulnerable communities. Successful practices have shown that a community’s capacity to manage and reduce its seismic risk relies on capitalization on policies, on technology and research results. An important role is played by education, than contribute to strengthening technical curricula of future practitioners and researchers through university and higher education programmes. In recent years an increasing number of initiatives have been launched in this field at the international and global cooperation level. Cooperative international academic research and training is key to reducing the gap between advanced and more vulnerable regions. EU-NICE is a European Commission funded higher education partnership for international development cooperation with the objective to build capacity of individuals who will operate at institutions located in seismic prone Asian Countries. The project involves five European Universities, eight Asian universities and four associations and NGOs active in advanced research on seismic mitigation, disaster risk management and international development. The project consists of a comprehensive mobility scheme open to nationals from Afghanistan, Bangladesh, China, Nepal, Pakistan, Thailand, Bhutan, India, Indonesia, Malaysia, Maldives, North Korea, Philippines, and Sri Lanka who plan to enrol in school or conduct research at one of five European partner universities in Italy, Greece and Portugal. During the 2010-14 time span a total number of 104 mobilities are being involved in scientific activities at the undergraduate, masters, PhD, postdoctoral and academic-staff exchange levels. This high number of mobilities and activities is selected and designed so as to produce an overall increase of knowledge that can result in an impact on earthquake mitigation. Researchers, future policymakers and practitioners build up their curricula over a range of disciplines in the fields of engineering, seismology, disaster risk management and urban planning. Specific educational and research activities focus on earthquake risk mitigation related topics such as: anti-seismic structural design, structural engineering, advanced computer structural collapse analysis, seismology, experimental laboratory studies, international and development issues in disaster risk management, social-economical impact studies, international relations and conflict resolution

ExoMol molecular line lists – XXVI: spectra of SH and NS

Line lists for the sulphur-containing molecules SH (the mercapto radical) and NS are computed as part of the ExoMol project. These line lists consider transitions within the X2Π ground state for 32SH, 33SH, 34SH,36SH and, 32SD, and 14N32S, 14N33S, 14N34S, 14N36S, and 15N32S. Ab initio potential energy (PEC) and spin-orbit coupling (SOC) curves are computed and then improved by fitting to experimentally observed transitions. Fully ab initio dipole moment curves (DMCs) computed at high level of theory are used to produce the final line lists. For SH, our fit gives a root-mean-square (rms) error of 0.03 cm−1 between the observed (⁠vmax = 4, Jmax = 34.5) and calculated transitions wavenumbers; this is extrapolated such that all X2Π rotational-vibrational-electronic (rovibronic) bound states are considered. For 32SH the resulting line list contains about 81 000 transitions and 2300 rovibronic states, considering levels up to vmax = 14 and Jmax = 60.5. For NS the refinement used a combination of experimentally determined frequencies and energy levels and led to an rms-fitting error of 0.002 cm−1. Each NS-calculated line list includes around 2.8 million transitions and 31 000 rovibronic states with a vibrational range up to v = 53 and rotational range up to J = 235.5, which covers up to 23 000 cm−1. Both line lists should be complete for temperatures up to 5000 K. Example spectra simulated using this line list are shown and comparisons made to the existing data in the CDMS data base. The line lists are available from the CDS (http://cdsarc.u-strasbg.fr) and ExoMol (www.exomol.com) data bases

Calibration and assessment of electrochemical low-cost sensors in remote alpine harsh environments

This work presents results from an original open-source low-cost sensor (LCS) system developed to measure tropospheric O3 in a remote high altitude alpine site. Our study was conducted at the Col Margherita Observatory (2543 m above sea level), in the Italian Eastern Alps. The sensor system mounts three commercial low-cost O3/NO2 sensors that have been calibrated before field deployment against a laboratory standard (Thermo Scientific; 49i-PS), calibrated against the standard reference photometer no. 15 calibration scale of the World Meteorological Organization (WMO). Intra- and intercomparison between the sensors and a reference instrument (Thermo Scientific; 49c) have been conducted for 7 months from May to December 2018. The sensors required an individual calibration, both in laboratory and in the field. The sensor's dependence on the environmental meteorological variables has been considered and discussed. We showed that it is possible to reduce the bias of one LCS by using the average coefficient values of another LCS working in tandem, suggesting a way forward for the development of remote field calibration techniques. We showed that it is possible reconstruct the environmental ozone concentration during the loss of reference instrument data in situations caused by power outages. The evaluation of the analytical performances of this sensing system provides a limit of detection (LOD) <5 ppb (parts per billion), limit of quantification (LOQ) <17 ppb, linear dynamic range (LDR) up to 250 ppb, intra-Pearson correlation coefficient (PCC) up to 0.96, inter-PCC >0.8, bias >3.5 ppb and ±8.5 at 95 % confidence. This first implementation of a LCS system in an alpine remote location demonstrated how to obtain valuable data from a low-cost instrument in a remote environment, opening new perspectives for the adoption of low-cost sensor networks in atmospheric sciences

Fabrication and characterization of dual function nanoscale pH-scanning ion conductance microscopy (SICM) probes for high resolution pH mapping

The easy fabrication and use of nanoscale dual function pH-scanning ion conductance microscopy (SICM) probes is reported. These probes incorporate an iridium oxide coated carbon electrode for pH measurement and an SICM barrel for distance control, enabling simultaneous pH and topography mapping. These pH-SICM probes were fabricated rapidly from laser pulled theta quartz pipets, with the pH electrode prepared by in situ carbon filling of one of the barrels by the pyrolytic decomposition of butane, followed by electrodeposition of a thin layer of hydrous iridium oxide. The other barrel was filled with an electrolyte solution and Ag/AgCl electrode as part of a conductance cell for SICM. The fabricated probes, with pH and SICM sensing elements typically on the 100 nm scale, were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and various electrochemical measurements. They showed a linear super-Nernstian pH response over a range of pH (pH 2–10). The capability of the pH-SICM probe was demonstrated by detecting both pH and topographical changes during the dissolution of a calcite microcrystal in aqueous solution. This system illustrates the quantitative nature of pH-SICM imaging, because the dissolution process changes the crystal height and interfacial pH (compared to bulk), and each is sensitive to the rate. Both measurements reveal similar dissolution rates, which are in agreement with previously reported literature values measured by classical bulk methods

Analytical methods in wineries: is it time to change?

A review of the methods for the most common parameters determined in wine—namely, ethanol, sulfur dioxide, reducing sugars, polyphenols, organic acids, total and volatile acidity, iron, soluble solids, pH, and color—reported in the last 10 years is presented here. The definition of the given parameter, official and usual methods in wineries appear at the beginning of each section, followed by the methods reported in the last decade divided into discontinuous and continuous methods, the latter also are grouped in nonchromatographic and chromatographic methods because of the typical characteristics of each subgroup. A critical comparison between continuous and discontinuous methods for the given parameter ends each section. Tables summarizing the features of the methods and a conclusions section may help users to select the most appropriate method and also to know the state-of-the-art of analytical methods in this area

ICMSF Methods Studies. XV. Comparison of Four Media and Methods for Enumerating Staphylococcus aureus in Powdered Milk.

Four media were examined for their usefulness in enumerating Staphylococcus aureus inoculated (a) into milk that was then dried or (b) directly into dried milk powder. In all, seven strains of S. aureus were inoculated individually into each preparation and were enumerated after two periods of storage (18 to 19 d and 60 to 61 d). Fourteen laboratories from twelve countries participated in the comparison which found that direct plating on agar medium in 14-cm petri dishes may be as useful as enrichment followed by streaking. Plating on Baird-Parker medium or on Hauschild pork plasma fibrinogen medium and a MPN method using Giolitti and Cantoni's broth with Tween 80 were equally sensitive for enumerating S. aureus in dried milk powder. The use of Hauschild medium may eliminate the need for supplementary tests to confirm colonies as S. aureus , but in some cases was found to fail in some laboratories. Giolitti and Cantoni's broth without Tween 80 generally was less useful than the three other media for enumerating S. aureus . S. aureus inoculated into milk that was then dried survived longer than when inoculated into dried milk