Variation of domain formation in a 15 nm NiFe layer exchange coupled with NiO layers of different thicknesses

The correlation between ferromagnetic domain formation and exchange bias in a series of NiFe/NiO samples with varying NiO thicknesses has been investigated using the magneto-optic Kerr effect and magnetic force microscopy. Below a critical thickness (15 nm) of NiO, the exchange bias HE is zero and ripple domains exist in the NiFe layer. Above this critical thickness, cross-tie type domain walls appear concurrently with the appearance of exchange bias. Both the number of cross-tie domain walls and the exchange bias increase with an increase in NiO thickness, reaching a maximum at 35 nm NiO, after which both show a gradual decrease. This variation of domain wall formation in the NiFe layer with the NiO thickness possibly reflects the variation of the domain structure in the NiO layer through interfacial exchange coupling

Lack of correlation between constitutive and induced resistance to a herbivore in crucifer plants: real or flawed by experimental methods?

The correlation between constitutive and induced resistance to herbivores in plants has long been of interest to evolutionary biologists, and various approaches to determining levels of resistance have been used in this field of research. In this study, we examined the relationship between constitutive and induced resistance to the diamondback moth, Plutella xylostella (L.) (Lepidoptera: Plutellidae), in 11 closely related species of wild crucifers. We assessed the survival, development, and reproduction of the test insects and calculated their intrinsic rate of increase as an indicator of constitutive and induced resistance for the plants. We used larvae of P. xylostella and jasmonic acid as elicitors of the induced response. We failed to find a correlation between constitutive and induced resistance in these crucifer plants when the induction of resistance was initiated by either herbivory or jasmonic acid application. Analysis of the results suggests that the failure to detect a relationship between the two types of resistance could be caused by flaws in measuring constitutive resistance, which was apparently confounded with induced resistance. We discuss the difficulties and pitfalls in measuring constitutive resistance and ways to improve the methodology in investigating the relationships between constitutive and induced resistance in plant

Angular dependence of magnetization reversal process in exchange coupled ferromagnetic/antiferromagnetic bilayers

The angular dependence of the magnetization reversal process in the exchange biased ferromagnetic/antiferromagnetic bilayers has been investigated carefully using the Stoner–Wohlfarth rotation model. Depending strongly on the orientation of the applied field and the competition between the unidirectional and uniaxial anisotropic energies, the magnetization rotation can occur at either the same side or the different sides of the field direction for the decreasing and increasing field branches of the hysteresis loop. The calculated results and the magneto-optical Kerr effect have been used to understand the magnetization reversal process in the NiFe/NiO bilayers, which is caused mainly by the magnetization rotation

Numerical study on the effect of welding and heating treatments on strength of high strength steel column

[EN] High strength steel box columns are usually fabricated from steel slab by applying welding. The welding process can introduce residual stresses and geometric imperfections into the columns and influence the column strength. In this study, a numerical investigation on the behavior of high strength steel thin-walled box columns under the compression force was carried out. The welding processes were firstly simulated with commercial package ABAQUS in this study to find out the residual stress distributions in high strength steel box column. After that, the column behaviors under the compression were modelled with predefined field from the previous step. The effect of the welding process (including flux-core arc welding and submerged arc welding), heating treatment (including preheating and post-weld heat treatment) and geometrical imperfection on the residual stress field and box column strength was investigated and discussed.Jin, J.; Bao, W.; Liu, J.; Peng, Z. (2018). Numerical study on the effect of welding and heating treatments on strength of high strength steel column. En Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures. ASCCS 2018. Editorial Universitat Politècnica de València. 667-673. https://doi.org/10.4995/ASCCS2018.2018.8370OCS66767

A Temperature-Thread Multiscale Modeling Approach for Efficient Prediction of Part Distortion by Selective Laser Melting

Selective laser melting (SLM) is a powder bed based additive manufacturing process to manufacture functional parts. The high-temperature process will produce large tensile residual stress which leads to part distortion and negatively affect product performance. Due to the complex process mechanism and coupling multi-physics phenomena, the micro-scale single laser scan modeling approach is not practical to predict macro part distortion since it demands an exceedingly long computational time. In this study, a temperature-based multiscale modeling approach has been developed to simulate material phase transition of powder-liquid-solid for fast prediction of part distortion. An equivalent body heat flux obtained from the micro-scale laser scan can be imported as “temperature-thread” to the subsequent layer hatching process. Then the hatched layer with temperature filed can be used as a basic unit to build up the macro-scale part with different scanning strategies. The temperature history and residual stress fields during the SLM process were obtained. In addition, the part distortion can be predicted with a reasonable accuracy by comparing with the experimental data.Mechanical Engineerin

Effect of substituting guinea grass with sunflower hulls on production performance and digestion traits in fattening rabbits

[EN] The objective of this study was to evaluate the use of sunflower hulls (SH) to substitute guinea grass (GG), traditionally used as a fibre source in the diets of fattening rabbits, on production performance, coefficients of total tract apparent digestibility (CTTAD) of nutrients, gastrointestinal tract development and caecal fermentation. A total of 160 mixed sex Hyla commercial meat rabbits were allocated to 4 experimental groups (40 per treatment) differing in the SH level inclusion in the diet offered to rabbits from 40 to 90 d of age: 0, 30, 60 and 90 g/kg on as-fed basis: SH0, SH30, SH60 and SH90 groups, respectively. Growth performance was recorded from 47 to 90 d of age, CTTAD of nutrients from 86 to 90 d of age, and gastrointestinal tract development, caecal fermentation and carcass traits were determined at 90 d of age. Increasing substitutions of SH in the diet indicated effects on growth performance, as higher feed intake and lower feed efficiency were observed in SH90 compared with SH0 (P-linear<0.05). Moreover, the higher SH substitution diet (SH60 and SH90) increased the relative caecum weight (P-linear<0.05). A linear negative effect of SH inclusion was observed for the digestibility of neutral detergent fibre (CTTAD from 0.294 to 0.232) and acid detergent fibre (CTTAD from 0.182 to 0.136; P-linear<0.05). Dietary SH substitution level had a quadratic effect on the villus height of the duodenum, jejunum and ileum obtained (P-quadratic<0.05), and the highest were observed in the SH60 group. There was a quadratic effect on the pH of caecum content (P-quadratic<0.05), and the lowest was 6.08 in SH30 group. The total volatil fatty acids increased linearly with increasing SH in diets (from 71.11 to 76.98 mmol/L; P-linear<0.05), and when dietary SH increased, the proportion of acetate tended to increase (P-linear<0.05), and the proportions of propionic and butyric were decreased (P-linear<0.05, respectively). Substitution of GG with SH had no effect on carcass characteristics and meat quality. The current work shows that SH can replace up to 60 g/kg in diets for fattening rabbits, with no adverse impact on aspects of production performance or digestion traits.This study was supported by the earmarked fund for Modern Agro-industry Technology Research System (CARS-43-B-1) and Funds of Shandong “Double Tops” Programme.Liu, G.; Sun, C.; Zhao, X.; Liu, H.; Wu, Z.; Li, F. (2018). Effect of substituting guinea grass with sunflower hulls on production performance and digestion traits in fattening rabbits. World Rabbit Science. 26(3):217-225. https://doi.org/10.4995/wrs.2018.9375SWORD21722526

Ammonium uptake and assimilation are required for rice defense against sheath blight disease

Nitrogen (N) is an important nutrient for plant growth and yield production, and rice grown in paddy soil mainly uses ammonium (NH4+) as its N source. Previous studies have shown that N status is tightly connected to plant defense; however, the roles of NH4+ uptake and assimilation in rice sheath blight disease response have not been studied previously. Here, we analyzed the effects of different N sources on plant defense against Rhizoctonia solani. The results indicated that rice plants grown in N-free conditions had higher resistance to sheath blight than those grown under N conditions. In greater detail, rice plants cultured with glutamine as the sole N source were more susceptible to sheath blight disease compared to the groups using NH4+ and nitrate (NO3–) as sole N sources. N deficiency severely inhibited plant growth; therefore, ammonium transporter 1;2 overexpressors (AMT1;2 OXs) were generated to test their growth and defense ability under low N conditions. AMT1;2 OXs increased N use efficiency and exhibited less susceptible symptoms to R. solani and highly induced the expression of PBZ1 compared to the wild-type controls upon infection of R. solani. Furthermore, the glutamine synthetase 1;1 (GS1;1) mutant (gs1;1) was more susceptible to R. solani infection than the wild-type control, and the genetic combination of AMT1;2 OX and gs1;1 revealed that AMT1;2 OX was less susceptible to R. solani and required GS1;1 activity. In addition, cellular NH4+ content was higher in AMT1;2 OX and gs1;1 plants, indicating that NH4+ was not directly controlling plant defense. In conclusion, the present study showed that the activation of NH4+ uptake and assimilation were required for rice resistance against sheath blight disease

Effect of substituting guinea grass with soybean hulls on production performance and digestion traits in fattening rabbits

[EN] The objective of this study was to evaluate the use of soybean hulls (SH) to substitute guinea grass (GG), traditionally used as fibre source in the diets of fattening rabbits on performance, coefficients of total tract apparent digestibility (CTTAD) of nutrients, gastrointestinal tract development and caecum fermentation. A total of 160 mixed sex Hyla commercial meat rabbits were allocated to 4 experimental groups (40 per treatment) differing in the SH level inclusion in the diet offered to rabbits from 40 to 90 d of age: 0, 50, 100 and 200 g/kg as-fed basis: SH0, SH50, SH100 and SH200 groups, respectively. Growth performance was recorded from 40 to 90 d of age, CTTAD of nutrients from 86 to 90 d of age, and gastrointestinal tract development, caecum fermentation and carcass traits were determined at 90 d of age. Average daily feed intake and the feed/gain ratio were lower in SH100 and SH200 groups than in SH0 group (P0.05). In conclusion, our results suggest that SH can substitute GG in the diets of fattening rabbits up to 200 g/kg in diet with no adverse effects on the growth performance, feed efficiency, carcass traits and meat quality.This study was supported by the earmarked fund for Modern Agro-industry Technology Research System (CARS-44-B-1).Shang, S.; Wu, Z.; Liu, G.; Sun, C.; Ma, M.; Li, FC. (2017). Effect of substituting guinea grass with soybean hulls on production performance and digestion traits in fattening rabbits. World Rabbit Science. 25(3):241-249. https://doi.org/10.4995/wrs.2017.6654SWORD24124925

Coupled superconducting qudit-resonator system: Energy spectrum, state population, and state transition under microwave drive

Superconducting quantum multilevel systems coupled to resonators have recently been considered in some applications such as microwave lasing and high-fidelity quantum logical gates. In this work, using an rf-SQUID type phase qudit coupled to a microwave coplanar waveguide resonator, we study both theoretically and experimentally the energy spectrum of the system when the qudit level spacings are varied around the resonator frequency by changing the magnetic flux applied to the qudit loop. We show that the experimental result can be well described by a theoretical model that extends from the usual two-level Jaynes-Cummings system to the present four-level system. It is also shown that due to the small anharmonicity of the phase device a simplified model capturing the leading state interactions fits the experimental spectra very well. Furthermore we use the Lindblad master equation containing various relaxation and dephasing processes to calculate the level populations in the simpler qutrit-resonator system, which allows a clear understanding of the dynamics of the system under the microwave drive. Our results help to better understand and perform the experiments of coupled multilevel and resonator systems and can be applied in the case of transmon or Xmon qudits having similar anharmonicity to the present phase device.This work was supported by the Ministry of Science and Technology of China (Grants No. 2014CB921202, No. 2015CB921104, and No. 2016YFA0300601),the National Natural Science Foundation of China (Grants No. 91321208 and No. 11674380)the Key Research Program of the Chinese Academy of Sciences (Grant No. XDPB08-3)S.H. acknowledges support by the US NSF (PHY-1314861)