2,159 research outputs found
Characterization of soil heavy metal pools in paddy fields in Taiwan: chemical extraction and solid-solution partitioning
Ongoing industrialization has resulted in an accumulation of metals like Cd, Cu, Cr, Ni, Zn, and Pb in paddy fields across Southeast Asia. Risks of metals in soils depend on soil properties and the availability of metals in soil. At present, however, limited information is available on how to measure or predict the directly available fraction of metals in paddy soils. Here, the distribution of Cd, Cu, Cr, Ni, Zn, and Pb in 19 paddy fields among the total, reactive, and directly available pools was measured using recently developed concepts for aerated soils. Solid-solution partitioning models have been derived to predict the directly available metal pool. Such models are proven to be useful for risk assessment and to derive soil quality standards for aerated soils. Soil samples (0-25 cm) were taken from 19 paddy fields from five different communities in Taiwan in 2005 and 2006. Each field was subdivided into 60 to 108 plots resulting in a database of approximately 3,200 individual soil samples. Total (Aqua Regia (AR)), reactive (0.43 M HNO3, 0.1 M HCl, and 0.05 M EDTA), and directly available metal pools (0.01 M CaCl2) were determined. Solid-solution partitioning models were derived by multiple linear regressions using an extended Freundlich equation using the reactive metal pool, pH, and the cation exchange capacity (CEC). The influence of Zn on metal partitioning and differences between both sampling events (May/November) were evaluated. Total metals contents range from background levels to levels in excess of current soil quality standards for arable land. Between 3% (Cr) and 30% (Cd) of all samples exceed present soil quality standards based on extraction with AR. Total metal levels decreased with an increasing distance from the irrigation water inlet. The reactive metal pool relative to the total metal content is increased in the order C
The role of high growth temperature GaAs spacer layers in 1.3-/spl mu/m In(Ga)As quantum-dot lasers
We investigate the mechanisms by which high growth temperature spacer layers (HGTSLs) reduce the threshold current of 1.3-/spl mu/m emitting multilayer quantum-dot lasers. Measured optical loss and gain spectra are used to characterize samples that are nominally identical except for the HGTSL. We find that the use of the HGTSL leads to the internal optical mode loss being reduced from 15 /spl plusmn/ 2 to 3.5 /spl plusmn/ 2 cm/sup -1/, better defined absorption features, and more absorption at the ground state resulting from reduced inhomogenous broadening and a greater dot density. These characteristics, together with a reduced defect density, lead to greater modal gain at a given current density
Cross Breeding and Hybrid Identification of Sulphite-tolerant Hybrids of Saccharomyces uvarum
Yeast species belonging to Saccharomyces have great potential for the wine industry. However, the sulphite tolerance of most S. uvarum strains is quite poor compared with that of the other Saccharomyces strains. Inorder to get new S. uvarum strains with tolerance to sulphite, and also with good fermentation characteristics, 21 candidates were screened from three different crossing combinations of sensitive S. uvarum strains to one sulphitetolerant strain. Ten of these hybrids were sulphite tolerant and contained the FZF1 gene from both parents. Intersimple sequence repeat (ISSR) analysis confirmed their hybrid status, based on six primers that produced 55 clear and reproducible bands, including 32 that were polymorphic. Two hybrids had identical fingerprints, indicating that it was the same clone. Thus, nine different novel sulphite-resistant hybrids of S. uvarum were obtained. The selected hybrid strains fermented very well at 30ºC in Sauvignon Blanc grape juice containing 2 mM of sodium sulphite, with minor differences in fermentation performance. Two strains (namely C13 and C21) performed very similarly to the sulphite-tolerant parent A9 and a commercial S. cerevisiae strain EC1118, and the production offermentation aromas, namely propanol, isobutanol and isoamyl alcohol by C13 was found to be the highest. This is the first report of using hybridisation to breed the sulphite-tolerant S. uvarum strains
Use of FBG optical sensors for structural health monitoring: Practical application
This paper describes the development of FBG Optical sensors for their practical application on structural health monitoring. The sensors were installed on the Tsing Ma Bridge for a trial run. The results using FBG sensors were in excellent agreement with those acquired by the bridge WASHMS
Improved Temperature Performance of 1.31-mu/m Quantum Dot Lasers by Optimized Ridge Waveguide Design
In this letter, we demonstrate the importance of the fabricated device structure for the external differential efficiency, threshold current density, and maximum operating temperature for ground state operation of a 1.31-mu/m quantum dot laser. The introduction of a shallow ridge etch design and selective electroplating of the gold bondpads is demonstrated to offer improved performance in comparison to a deep ridge etch design with thinner evaporated gold bondpads
High-performance three-layer 1.3-/spl mu/m InAs-GaAs quantum-dot lasers with very low continuous-wave room-temperature threshold currents
The combination of high-growth-temperature GaAs spacer layers and high-reflectivity (HR)-coated facets has been utilized to obtain low threshold currents and threshold current densities for 1.3-/spl mu/m multilayer InAs-GaAs quantum-dot lasers. A very low continuous-wave (CW) room-temperature threshold current of 1.5 mA and a threshold current density of 18.8 A/cm/sup 2/ are achieved for a three-layer device with a 1-mm HR/HR cavity. For a 2-mm cavity, the CW threshold current density is as low as 17 A/cm/sup 2/ for an HR/HR device. An output power as high as 100 mW is obtained for a device with HR/cleaved facets
Elastic model scale and material for underwater structure of cross-sea bridge
With the bridge construction gradually from inland to coast and offshore, underwater structure of cross-sea bridge can encounter more complex hydrodynamic action. When elastic model is used to simulate the hydrodynamic response of underwater structure, the model scale and model material is the first problem must be solved. Based on principle of similitude, elastic model should meet the geometric similarity, kinematic similarity and mechanical similarity. Formula derivation gives the scale conditions for elastic model are as follows, geometric scale (Lr) equals elastic modulus scale (Er) and density scale (??r) equals 1. Then, how to find a material with same density and the elastic modulus is 1/ Lr of prototype is the key to make a model
Long-distant contribution and radiative decays to light vector meson
The discrepancy between the PQCD calculation and the CLEO data for
() stimulates our interest in
exploring extra mechanism of decay. In this work, we apply an
important non-perturbative QCD effect, i.e., hadronic loop mechanism, to study
radiative decay. Our numerical result shows that the
theoretical results including the hadronic loop contribution and the PQCD
calculation of are consistent with the corresponding
CLEO data of . We expect further experimental
measurement of at BES-III, which will be helpful to
test the hadronic loop effect on decay.Comment: 7 pages, 2 figures. Accepted for publication in Eur. Phys. J.
Synergism between cAMP and PPARγ signalling in the initiation of UCP1 gene expression in HIB1B brown adipocytes
Expression of the brown adipocyte-specific gene, uncoupling protein 1 (UCP1), is increased by both PPAR stimulation and cAMP activation through their ability to stimulate the expression of the PPAR coactivator PGC1. In HIB1B brown preadipocytes, combination of the PPAR agonist, rosiglitazone, and the cAMP stimulator forskolin synergistically increased UCP1 mRNA expression, but PGC1 expression was only increased additively by the two drugs. The PPAR antagonist, GW9662, and the PKA inhibitor, H89, both inhibited UCP1 expression stimulated by rosiglitazone and forskolin but PGC1 expression was not altered to the same extent. Reporter studies demonstrated that combined rosiglitazone and forskolin synergistically activated transcription from a full length 3.1 kbp UCP1 luciferase promoter construct, but the response was only additive and much reduced when a minimal 260 bp proximal UCP1 promoter was examined. Rosiglitazone and forskolin in combination were able to synergistically stimulate promoters comprising of tandem repeats of either PPREs or CREs. We conclude that rosiglitazone and forskolin act together to synergistically activate the UCP1 promoter directly rather than by increasing PGC1 expression and by a mechanism involving cross-talk between the signalling systems regulating the CRE and PPRE on the promoters
- …