Documentation of a ground hydrology parameterization for use in the GISS atmospheric general circulation model

The moisture transport processes related to the earth's surface relevant to the ground circulation model GCM are presented. The GHM parametrizations considered are: (1) ground wetness and soil parameters; (2) precipitation; (3) evapotranspiration; (4) surface storage of snow and ice; and (5) runout. The computational aspects of the GHM using computer programs and flow charts are described

Thermalization and temperature distribution in a driven ion chain

We study thermalization and non-equilibrium dynamics in a dissipative quantum many-body system -- a chain of ions with two points of the chain driven by thermal bath under different temperature. Instead of a simple linear temperature gradient as one expects from the classical heat diffusion process, the temperature distribution in the ion chain shows surprisingly rich patterns, which depend on the ion coupling rate to the bath, the location of the driven ions, and the dissipation rates of the other ions in the chain. Through simulation of the temperature evolution, we show that these unusual temperature distribution patterns in the ion chain can be quantitatively tested in experiments within a realistic time scale.Comment: 5 pages, 5 figure

Concept Validation for Selective Heating and Press Hardening of Automotive Safety Components with Tailored Properties

© (2014) Trans Tech Publications, Switzerland.A new strategy termed selective heating and press hardening, for hot stamping of boron steel parts with tailored properties is proposed in this paper. Feasibility studies were carried out through a specially designed experimental programme. The main aim was to validate the strategy and demonstrate its potential for structural optimisation. In the work, a lab-scale demonstrator part was designed, and relevant manufacturing and property-assessment processes were defined. A heating technique and selective-heating rigs were designed to enable certain microstructural distributions in blanks to be obtained. A hot stamping tool set was designed for forming and quenching the parts. Demonstrator parts of full martensite phase, full initial phase, and differentially graded microstructures have been formed with high dimensional quality. Hardness testing and three point bending tests were conducted to assess the microstructure distribution and load bearing performance of the as-formed parts, respectively. The feasibility of the concept has been validated by the testing results

Probability of undetected error after decoding for a concatenated coding scheme

A concatenated coding scheme for error control in data communications is analyzed. In this scheme, the inner code is used for both error correction and detection, however the outer code is used only for error detection. A retransmission is requested if the outer code detects the presence of errors after the inner code decoding. Probability of undetected error is derived and bounded. A particular example, proposed for NASA telecommand system is analyzed

The undetected error probability for shortened hamming codes

Hamming or shortened Hamming codes are widely used for error detection in data communications. For example, the CCITT (International Telegraph and Telephone Consultative Committee) recommendation X.25 for packet-switched data networks adopts a distance-4 cyclic Hamming code with 16 parity-check bits for error detection. The natural length of this code is n = 2(15)-1 = 32,767. In practice the length of a data packet is no more than a few thousand bits which is much shorter than the natural length of the code. Consequently, a shortened version of thecode is used. Often the length of a data packet varies, say from a few hundred bits to a few thousand bits, hence the code must be shortened by various degrees. Shortening affects the performance of the code. The error-detection performance of shortened Hamming codes, particularly the codes obtained from the distance-4 Hamming codes adopted by CCITT recommendation X.25, is investigated. A method for computing the probability of an undetected error is presented

BCH codes for large IC random-access memory systems

In this report some shortened BCH codes for possible applications to large IC random-access memory systems are presented. These codes are given by their parity-check matrices. Encoding and decoding of these codes are discussed

Performance analysis of the word synchronization properties of the outer code in a TDRSS decoder

A self-synchronizing coding scheme for NASA's TDRSS satellite system is a concatenation of a (2,1,7) inner convolutional code with a (255,223) Reed-Solomon outer code. Both symbol and word synchronization are achieved without requiring that any additional symbols be transmitted. An important parameter which determines the performance of the word sync procedure is the ratio of the decoding failure probability to the undetected error probability. Ideally, the former should be as small as possible compared to the latter when the error correcting capability of the code is exceeded. A computer simulation of a (255,223) Reed-Solomon code as carried out. Results for decoding failure probability and for undetected error probability are tabulated and compared