2,433 research outputs found
Modelling the electrical conductivity of soil in the Yangtze delta in three dimensions
Numerous processes, past and present, have given rise to lateral and vertical variation in the soil and to its individual properties such as its salinity and electrical conductivity. The resulting patterns of variation are complex and appear to comprise both random and deterministic components. The latter dominates vertically as trends in most soil profiles, and in the situation we describe it is prominent in the horizontal plane, too. Describing this variation requires flexible choice of covariance function. The processes of model estimation and prediction by kriging in three dimensions are similar to those in two dimensions. The extra complexity of the three-dimensional variation requires practitioners to appreciate fully the assumptions that their choices of model imply and to establish ways of testing the validity of these assumptions. We have examined several covariance functions more commonly used to describe simultaneously variation in space and time and adapted them to model three-dimensional variation in soil. We have applied these covariance functions to model the variation in salinity in reclaimed land in the Yangtze delta of China where the apparent electrical conductivity (ECa) has been measured at numerous points down to 1.1 m. The models take into account random and deterministic components in both the horizontal and vertical dimensions. The most suitable mixed model was then used to krige the ECa on a fine grid from which three-dimensional diagrams of the salinity are displayed
Applicability of perturbative QCD to decays
We develop perturbative QCD factorization theorem for the semileptonic heavy
baryon decay , whose form factors are
expressed as the convolutions of hard quark decay amplitudes with universal
and baryon wave functions. Large logarithmic
corrections are organized to all orders by the Sudakov resummation, which
renders perturbative expansions more reliable. It is observed that perturbative
QCD is applicable to decays for velocity transfer
greater than 1.2. Under requirement of heavy quark symmetry, we predict the
branching ratio , and determine
the and baryon wave functions.Comment: 12 pages in Latex file, 3 figures in postscript files, some results
are changed, but the conclusion is the sam
Study of f_0(980) and f_0(1500) from B_s \to f_0(980)\pi, f_0(1500)\pi Decays
In this paper, we analyze the scalar mesons and from
the decays within Perturbative
QCD approach. From the leading order calculations, we find that (a) in the
allowed mixing angle ranges, the branching ratio of is about , which is smaller than
that of (the difference is a few times even one
order); (b) the decay is better to distinguish
between the lowest lying state or the first excited state for ,
because the branching ratios for two scenarios have about one-order difference
in most of the mixing angle ranges; and (c) the direct CP asymmetries of for two scenarios also exists great difference. In
scenario II, the variation range of the value according to the mixing angle is very small, except for
the values corresponding to the mixing angles being near or
, while the variation range of in scenario I is very large. Compared with the future data for
the decay , it is ease to determine the nature
of the scalar meson .Comment: 16 pages, 3 figures, Revte
Hamiltonian Formalism of the de-Sitter Invariant Special Relativity
Lagrangian of the Einstein's special relativity with universal parameter
() is invariant under Poincar\'e transformation which preserves
Lorentz metric . The has been extended to be
one which is invariant under de Sitter transformation that preserves so called
Beltrami metric . There are two universal parameters and in
this Special Relativity (denote it as ). The
Lagrangian-Hamiltonian formulism of is formulated in this
paper. The canonic energy, canonic momenta, and 10 Noether charges
corresponding to the space-time's de Sitter symmetry are derived. The canonical
quantization of the mechanics for -free particle is
performed. The physics related to it is discussed.Comment: 24 pages, no figur
Updated Analysis of a_1 and a_2 in Hadronic Two-body Decays of B Mesons
Using the recent experimental data of , , and various model calculations on form
factors, we re-analyze the effective coefficients a_1 and a_2 and their ratio.
QCD and electroweak penguin corrections to a_1 from and
a_2 from are estimated. In addition to the
model-dependent determination, the effective coefficient a_1 is also extracted
in a model-independent way as the decay modes are related by
factorization to the measured semileptonic distribution of at . Moreover, this enables us to extract model-independent
heavy-to-heavy form factors, for example,
and
. The determination of the magnitude of
a_2 from depends on the form factors ,
and at . By requiring that a_2 be
process insensitive (i.e., the value of a_2 extracted from and
states should be similar), as implied by the factorization
hypothesis, we find that form factors are severely constrained;
they respect the relation . Form factors and at
inferred from the measurements of the longitudinal
polarization fraction and the P-wave component in are
obtained. A stringent upper limit on a_2 is derived from the current bound on
\ov B^0\to D^0\pi^0 and it is sensitive to final-state interactions.Comment: 33 pages, 2 figures. Typos in Tables I and IX are corrected. To
appear in Phys. Rev.
Study on vibration and stability of functionally graded cylindrical shells subjected to hydrostatic pressure
Based on the Flügge’s shell theory, the vibration characteristics and stability of submerged
functionally graded (FG) cylindrical shell under hydrostatic pressure is examined. By means of conversion
switch on axial wave number, the coupled frequency of submerged FG cylindrical shell with various
boundary conditions is obtained, using wave propagation method and Newton method. Then the critical
pressure of FG cylindrical shells is given by applying linear fitting method. Results are compared to known
solutions, where these solutions exist. The natural frequency and critical pressure of FG cylindrical shell are illustrated. The effects of constituent materials, volume fraction, boundary condition and dimensions on the natural frequencies and critical pressures of submerged FG cylindrical shell are illustrated by examples
Implications of Recent Measurements of Hadronic Charmless B Decays
Implications of recent CLEO measurements of hadronic charmless B decays are
discussed. (i) Employing the Bauer-Stech-Wirbel (BSW) model for form factors as
a benchmark, the data indicate that the form factor
is smaller than that predicted by the BSW model, whereas the
data of imply that the form factors are greater than the BSW model's values. (ii) The tree-dominated
modes imply that the effective
number of colors N_c(LL) for (V-A)(V-A) operators is preferred to be smaller,
while the current limit on shows that N_c(LR)>3. The data of and clearly indicate that . (iii) In
order to understand the observed suppression of and
non-suppression of modes, both being governed by the form factor
, the unitarity angle is preferred to be greater than
. By contrast, the new measurement of no
longer strongly favors . (iv) The observed pattern K^-\pi^+\sim
\ov K^0\pi^-\sim {2\over 3}K^-\pi^0 is consistent with the theoretical
expectation: The constructive interference between electroweak and QCD penguin
diagrams in the mode explains why {\cal B}(B^-\to K^-\pi^0)>{1\over
2}{\cal B}(\ov B^0\to K^-\pi^+). (v) The observation \nc(LL)<3<\nc(LR) and
our preference for \nc(LL)\sim 2 and \nc(LR)\sim 6 are justified by a
recent perturbative QCD calculation of hadronic rare B decays in the heavy
quark limit.Comment: 21 pages; CLEO measurements of several charmless B decay modes are
updated. Discussion of the unitarity angle gamma in the \rho\pi mode is
revise
Low electric field induction in BaTiO3-epoxy nanocomposites
Epoxy is widely used material, but epoxy has limitations in terms of brittleness in failure, and thus researchers
explore toughening and strengthening options such as adding a second phase or using electromagnetic fields
to tailor toughness and strength, on demand and nearly instantaneously. Such approach falls into the category
of active toughening but has not been extensively investigated. In this research, Si-BaTiO3 nanoparticles were
used to modify the electro-mechanical properties of a high-performance aerospace-grade epoxy so as to study
its response to electric fields, specifically low field strengths. To promote uniform dispersion and distribution, the Si-BaTiO3 nanoparticles were functionalised with silane coupling agents and mixed in the epoxy Araldite LY1564
at different content loads (1, 5, 10 wt%), which was then associated with its curing agent Aradur 3487. Real-time
measurements were conducted using Raman spectroscopy while applying electric fields to the nanocomposite
specimens. The Raman data showed a consistent trend of increasing intensity and peak broadening under
the increasing electric field strength and Si-BaTiO3 contents. This was attributed to the BaTiO3 particles’ dipolar displacement in the high-content nanocomposites (i.e., 5 wt% and 10 wt%). The study offers valuable insights on how electric field stimulation can actively enhance the mechanical properties in epoxy composites, specifically in
relatively low fields and thin, high-aspect-ratio composite layers which would require in-situ mechanical testing
equipped with electric field application, an ongoing investigation of the current research
Study of the influence of temperature on the measurement accuracy of transit-time ultrasonic flowmeters
Purpose: The purpose of this study is to deal largely with the influence of temperature variation on the measurement accuracy of transit-time ultrasonic flowmeter. Design/methodology/approach: The causes of measurement error due to temperature are qualitatively and quantitatively analyzed, and a mathematical model is established. The experimental data are processed and analyzed, and the temperature compensation coefficient of flow measurement is obtained. Findings: The experimental results show that the flow measurement results by temperature compensation are helpful in improving the measurement accuracy of the ultrasonic flowmeter. Practical implications: This study has certain application value, which can provide theoretical support for the design of high-precision ultrasonic flowmeters and design guidance. Originality/value: It is worth emphasizing that there are few research studies on the influence factors of temperature. This paper focuses on the influence of the temperature change on the flowmeter that is modeled, and the high precision flow parameter test system is designed based on the established model
Influence of stator and rotor pole number combinations on the electromagnetic performance of stator slot-opening PM hybrid-excited machine
A new type of three-phase stator hybrid excited machine with permanent magnets (PMs) located at the slot openings of field winding slots is presented in this paper. It has the advantage of good flux regulation capability due to the field excitation. The machines with different stator/rotor pole combinations, i.e., 6-stator pole and 7-/8-/10-/11-/13-/14-rotor poles, have been comparatively investigated in terms of the open-circuit and on-load characteristics, as well as the influence of dc current and the unbalanced magnetic forces. The 2-D finite element analysis (FEA) has been employed for analysis and optimization of the machines together with experimental validation
- …