56,293 research outputs found
The influence of laser hardening on wear in the valve and valve seat contact
In internal combustion engines it is important to manage the wear in the valve and valve seat contact in order to minimise emissions and maximise economy. Traditionally wear in this contact has been controlled by the use of a valve seat insert and the careful selection of materials for both the valve and the insert. More recently, due to the increasing demands for both performance and cost, alternative methods of controlling the wear, and the resulting valve recession, have been sought. Using the heating effect of a laser to induce localised phase transformations, to increase hardness and wear resistance, in materials has been used since the 1970s, however it is only in recent years that it has been able to compete with more established surface treatment techniques, particularly in terms of cost, as new laser hardware has been developed. In this work, a laser has been used to treat the valve seat area of a cast iron cylinder head. In order to optimise the laser parameters for use on the head, preliminary tests were carried out to investigate the fundamental wear characteristics of untreated cast iron and also cast iron with a range of laser treatments. Previous work has identified the predominant wear mechanism in the valve and valve seat contact as impact on valve closure. Two bespoke test machines, one for testing basic specimens and one for testing components, were used to identify the laser parameters most likely to yield acceptable results when applied to a cylinder head to be used in a fired dynamometer test. © 2009 Elsevier B.V. All rights reserved
The influence of ship motion of manual control skills
The effects of ship motion on a range of typical manual control skills were examined on the Warren Spring ship motion simulator driven in heave, pitch, and roll by signals taken from the frigate HMS Avenger at 13 m/s (25 knots) into a force 4 wind. The motion produced a vertical r.m.s. acceleration of 0.024g, mostly between 0.1 and 0.3 Hz, with comparatively little pitch or roll. A task involving unsupported arm movements was seriously affected by the motion; a pursuit tracking task showed a reliable decrement although it was still performed reasonably well (pressure and free moving tracking controls were affected equally by the motion); a digit keying task requiring ballistic hand movements was unaffected. There was no evidence that these effects were caused by sea sickness. The differing response to motion of the different tasks, from virtual destruction to no effect, suggests that a major benefit could come from an attempt to design the man/control interface onboard ship around motion resistant tasks
Laser-heated thruster
The development of a computer program for the design of the thrust chamber for a CW laser heated thruster was examined. Hydrodgen was employed as the propellant gas and high temperature absorber. The laser absorption coefficient of the mixture/laser radiation combination is given in temperature and species densities. Radiative and absorptive properties are given to determine radiation from such gas mixtures. A computer code for calculating the axisymmetric channel flow of a gas mixture in chemical equilibrium, and laser energy absorption and convective and radiative heating is described. It is concluded that: (1) small amounts of cesium seed substantially increase the absorption coefficient of hydrogen; (2) cesium is a strong radiator and contributes greatly to radiation of cesium seeded hydrogen; (3) water vapor is a poor absorber; and (4) for 5.3mcm radiation, both H2O/CO and NO/CO seeded hydrogen mixtures are good absorbers
Precarious lives: Experiences of forced labour among refugees and asylum seekers in England
This research uncovered evidence that refugees and asylum seekers are susceptible to forced labour in the UK. The findings are based on a two-year study by academics at the Universities of Leeds and Salford, funded by the Economic and Social Research Council (ESRC). The research explored experiences of forced labour among 30 people who had made claims for asylum in England, supplemented by interviews with 23 practitioners and policy-makers
Test of sodium boiling in a single tube-in- shell heat exchanger over the range 1720 deg to 1980 deg F /1211 to 1355 K/
Bimetallic heat exchanger tube performance in sodium boiling facilit
Universal Properties of Linear Magnetoresistance in Strongly Disordered Semiconductors
Linear magnetoresistance occurs in semiconductors as a consequence of strong
electrical disorder and is characterized by nonsaturating magnetoresistance
that is proportional to the applied magnetic field. By investigating a
disordered MnAs-GaAs composite material, it is found that the magnitude of the
linear magnetoresistance (LMR) is numerically equal to the carrier mobility
over a wide range and is independent of carrier density. This behavior is
complementary to the Hall effect that is independent of the mobility and
dependent on the carrier density. Moreover, the LMR appears to be insensitive
to the details of the disorder and points to a universal explanation of
classical LMR that can be applied to other material systems.Comment: Accepted by Phys. Rev. B (2010
Elastic precursor of the transformation from glycolipid-nanotube to -vesicle
By the combination of optical tweezer manipulation and digital video
microscopy, the flexural rigidity of single glycolipid "nano" tubes has been
measured below the transition temperature at which the lipid tubules are
transformed into vesicles. Consequently, we have found a clear reduction of the
rigidity obviously before the transition as temperature increasing. Further
experiments of infrared spectroscopy (FT-IR) and differential scanning
calorimetry (DSC) have suggested a microscopic change of the tube walls,
synchronizing with the precursory softening of the nanotubes.Comment: 9 pages, 6 figure
Fluctuations and correlations in population models with age structure
We study the population profile in a simple discrete time model of population
dynamics. Our model, which is closely related to certain ``bit-string'' models
of evolution, incorporates competition for resources via a population dependent
death probability, as well as a variable reproduction probability for each
individual as a function of age. We first solve for the steady-state of the
model in mean field theory, before developing analytic techniques to compute
Gaussian fluctuation corrections around the mean field fixed point. Our
computations are found to be in good agreement with Monte-Carlo simulations.
Finally we discuss how similar methods may be applied to fluctuations in
continuous time population models.Comment: 4 page
Estimating proportions of objects from multispectral scanner data
Progress is reported in developing and testing methods of estimating, from multispectral scanner data, proportions of target classes in a scene when there are a significiant number of boundary pixels. Procedures were developed to exploit: (1) prior information concerning the number of object classes normally occurring in a pixel, and (2) spectral information extracted from signals of adjoining pixels. Two algorithms, LIMMIX and nine-point mixtures, are described along with supporting processing techniques. An important by-product of the procedures, in contrast to the previous method, is that they are often appropriate when the number of spectral bands is small. Preliminary tests on LANDSAT data sets, where target classes were (1) lakes and ponds, and (2) agricultural crops were encouraging
- …