Biomechanical Performance of a Novel Implant Design in Simulated Extraction Sites and Sinuslift Procedures

With increasing experience and in an attempt to shorten overall treatment times, implant placement in combination with tooth extractions and sinus lift procedures has become popular. In both cases, primary stability has to be achieved by either engaging apical and oral regions of trabecular bone or by engaging residual host bone beneath the sinus cavity. Extraction sites were formed by pressing a root analog into homogeneous low density polyurethane foam which was used as bone surrogate while a 3 mm thick sheet of medium density foam was used for mimicking a sinus lift situation. Two types (n = 10) of bone level implants with a conventional tapered design and a cervical back taper (NobelActive; control) and a novel design characterized by a shift in core diameter and thread geometry (AlfaGate; test) were placed in these models following conventional osteotomy preparation. Insertion torque was measured using a surgical motor and primary stability was determined by resonance frequency analysis. Statistical analysis was based on Welch two sample t tests with the level of significance set at α = 0.05. In sinuslifting, NobelActive implants required significantly higher insertion torques as compared to AlfaGate (p = 0.000) but did not achieve greater implant stability (p = 0.076). In extraction sites, AlfaGate implants showed both, significantly higher insertion torques (p = 0.004) and significantly greater implant stability (p = 0.000). The novel implant design allowed for greater primary stability when being placed in simulated extraction sockets and sinuslift situations. While in extraction sockets the position of condensing threads in combination with an increase in core diameter is beneficial, the deep cervical threads of the novel implant lead to superior performance in sinuslift situations

Combination of Digital and Conventional Workflows in the CAD/CAM-Fabrication of an Implant-Supported Overdenture

Completely digital workflows for the fabrication of implant-supported removable restorations are not yet common in clinical dental practice. The aim of the current case report is to illustrate a reliable and comfortable workflow that reasonably merges conventional and digital workflows for the CAD/CAM-fabrication of implant-supported overdentures. The 53-year old patient was supplied with a digitally processed complete denture in the upper jaw and, simultaneously, with an overdenture supported by four interforaminal implants in the lower jaw. The overdenture included a completely digitally processed and manufactured alloy framework that had been fabricated by selective laser sintering. The case report indicates that digital manufacturing processes for extensive and complex removable restorations are possible. However, as it is currently not yet possible to digitally obtain functional impressions, future developments and innovations might focus on that issue

No Significant Bone Resorption after Open Treatment of Mandibular Condylar Head Fractures in the Medium-Term

Open treatment of condylar head fractures (CHF) is considered controversial. In this retrospective cohort study our primary objective was therefore to assess bone resorption and remodeling as well as patients function after open treatment of CHF in a medium-term follow-up (15.1 ± 2.2 months). We included 18 patients with 25 CHF who underwent open reduction and internal fixation, between 2016 and 2021, in our analysis. The clinical data and cone-beam computed tomography (CBCT) datasets were analyzed. The condylar processes were segmented in the postoperative (T1) and follow-up (T2) CBCT scans. Volumetric and linear bone changes were the primary outcome variables, measured by using a sophisticated 3D-algorithm. The mean condylar head volume decreased non-significantly from 3022.01 ± 825.77 mm3 (T1) to 2878.8 ± 735.60 mm3 (T2; p = 0.52). Morphological alterations indicated remodeling and resorption. The pre-operative maximal interincisal opening (MIO) was 19.75 ± 3.07 mm and significantly improved to 40.47 ± 1.7 mm during follow-up (p = 0.0005). Low rates of postoperative complications were observed. Open reduction of CHF leads to good clinical outcomes and low rates of medium-term complications. This study underlines the feasibility and importance of open treatment of CHF and may help to spread its acceptance as the preferred treatment option

Cranioplasty with patient-specific implants in repeatedly reconstructed cases

Objective: Cranioplasty is indicated to restore form and function of bone defects of the neurocranium. Autografts are the gold standard, alloplastic materials are used when autologous bone is unavailable or unsuitable, and increasing evidence supports the use of patient-specific implants (PSIs) for reconstruction. We reviewed our own patient data to assess pre- and intraoperative aspects, complications and costs in patients that were treated with PSIs from titanium or polyetheretherketone (PEEK) for skull bone reconstruction. Methods: We retrospectively evaluated all patients receiving a PSI as at least a secondary reconstruction between 2004 and 2016 at Maastricht University Medical Center. These cases were analyzed for demographics, perioperative surgical and medical aspects, as well as costs. Results: In total 30 patients received PSIs, of which 20 were included in this study. Duration of PSI placement was not statistically different between group I, where previously placed reconstruction material was still in situ, and group II, where no remaining previously placed reconstruction material was present (group I: 104 +/- 27 mins, group II: 86 +/- 36 mins; p = 0.27). Postoperatively, 2 patients experienced complications (10%). Costs of obtaining the PSIs were not significantly different between group I and group II (group I: mean EUR 7536 +/- 2759, group II: mean EUR 8351 +/- 2087, p = 0.51). Conclusion: Treatment of skull bone defects in repeated reconstruction requires an optimal preoperative planning and intraoperative procedure. In this retrospective study comparing repeatedly reconstructed cases with and without remaining previously placed reconstruction material present at the surgical site, we could not find significant differences in the duration of the surgical procedure nor costs of obtaining the PSIs. The protocol followed at MUMC for preoperative planning, manufacturing, and surgery, represents the current state-of-the-art treatment. (C) 2019 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved

Accuracy of Guided Surgery and Real-Time Navigation in Temporomandibular Joint Replacement Surgery

Background: Sophisticated guided surgery has not been implemented into total joint replacement-surgery (TJR) of the temporomandibular joint (TMJ) so far. Design and in-house manufacturing of a new advanced drilling guide with vector and length control for a typical TJR fossa component are described in this in vitro study, and its accuracy/utilization was evaluated and compared with those of intraoperative real-time navigation and already available standard drilling guides. Methods: Skull base segmentations of five CT-datasets from different patients were used to design drilling guides with vector and length control according to virtual surgical planning (VSP) for the TJR of the TMJ. Stereolithographic models of the skull bases were printed three times for each case. Three groups were formed to compare our newly designed advanced drilling guide with a standard drilling guide and drill-tracking by real-time navigation. The deviation of screw head position, screw length and vector in the lateral skull base have been evaluated (n = 72). Results: There was no difference in the screw head position between all three groups. The deviation of vector and length was significantly lower with the use of the advanced drilling guide compared with standard guide and navigation. However, no benefit in terms of accuracy on the lateral skull base by the use of real-time navigation could be observed. Conclusion: Since guided surgery is standard in implant dentistry and other CMF reconstructions, this new approach can be introduced into clinical practice soon, in order to increase accuracy and patient safety

Continuous Multidisciplinary Care for Patients With Orofacial Clefts—Should the Follow-up Interval Depend on the Cleft Entity?

Objective: The multidisciplinary follow-up of patients with cleft lip with or without palate (CL/P) is organized differently in specialized centers worldwide. The aim of this study was to evaluate the different treatment needs of patients with different manifestations of CL/P and to potentially adapt the frequency and timing of checkup examinations accordingly. Design:We retrospectively analyzed the data of all patients attending the CL/P consultation hour at a tertiary care center between June 2005 and August 2020 (n=1126). We defined 3 groups of cleft entities: (1) isolated clefts of lip or lip and alveolus (CL/A), (2) isolated clefts of the hard and/or soft palate, and (3) complete clefts of lip, alveolus and palate (CLP). Timing and type of therapy recommendations given by the specialists of different disciplines were analyzed for statistical differences. Results: Patients with CLP made up the largest group (n=537), followed by patients with cleft of the soft palate (n=371) and CL ±A (n=218). There were significant differences between the groups with regard to type and frequency of treatment recommendations. A therapy was recommended in a high proportion of examinations in all groups at all ages. Conclusion: Although there are differences between cleft entities, the treatment need of patients with orofacial clefts is generally high during the growth period. Patients with CL/A showed a similarly high treatment demand and should be monitored closely. A close follow-up for patients with diagnosis of CL/P is crucial and measures should be taken to increase participation in followup appointments

Self-activated mesh device using shape memory alloy for periosteal expansion osteogenesis

The present study evaluated the use of this self-activated shape memory alloy (SMA) device, with a focus on its effects in the region under the periosteum. Twelve Japanese white rabbits were used in this study. The device was inserted under the periosteum at the forehead. In the experimental group, the device was pushed, bent, and attached to the bone surface and fixed with a titanium screw. In control group, the device was only inserted under the periosteum. After 14 days, the screw was removed and the mesh was activated in the experimental group. Rabbits were sacrificed 5 and 8 weeks after the operation and newly formed bone was histologically and radiographically evaluated. The quantitative data by the area and the occupation of newly formed bone indicated that the experimental group had a higher volume of new bone than the control group at each consolidation period. Histologically, some newly formed bone was observed and most of the subperiosteal space underneath the device was filled with fibrous tissue, and a thin layer of immature bone was observed in the control group. In the experimental group, multiple dome-shaped bones, outlined by thin and scattered trabeculae, were clearly observed under the SMA mesh device. The use of self-activated devices for the periosteal expansion technique may make it possible to avoid donor site morbidity, trans-skin activation rods, any bone-cutting procedure, and the following intermittent activation procedure

Self-activated mesh device using shape memory alloy for periosteal expansion osteogenesis

The present study evaluated the use of this self-activated shape memory alloy (SMA) device, with a focus on its effects in the region under the periosteum. Twelve Japanese white rabbits were used in this study. The device was inserted under the periosteum at the forehead. In the experimental group, the device was pushed, bent, and attached to the bone surface and fixed with a titanium screw. In control group, the device was only inserted under the periosteum. After 14 days, the screw was removed and the mesh was activated in the experimental group. Rabbits were sacrificed 5 and 8 weeks after the operation and newly formed bone was histologically and radiographically evaluated. The quantitative data by the area and the occupation of newly formed bone indicated that the experimental group had a higher volume of new bone than the control group at each consolidation period. Histologically, some newly formed bone was observed and most of the subperiosteal space underneath the device was filled with fibrous tissue, and a thin layer of immature bone was observed in the control group. In the experimental group, multiple dome-shaped bones, outlined by thin and scattered trabeculae, were clearly observed under the SMA mesh device. The use of self-activated devices for the periosteal expansion technique may make it possible to avoid donor site morbidity, trans-skin activation rods, any bone-cutting procedure, and the following intermittent activation procedure

Clinical Follow-Up in Orofacial Clefts—Why Multidisciplinary Care Is the Key

(1) Background: Although most clinicians involved in the treatment of cleft patients agree upon the major importance of interdisciplinary cooperation and many protocols and concepts have been discussed in the literature, there is little evidence of the relevance of continuous interdisciplinary care. We aimed to objectify the type and number of therapeutic decisions resulting from an annual multidisciplinary follow-up. (2) Methods: We retrospectively analyzed the data of all 1126 patients followed up in the weekly consultation hours for cleft patients at university clinics in Leipzig for the years 2005–2020. We assessed the clinical data of every patient and specifically evaluated the treatment decisions taken at different points in time by the participating experts of different specialties. (3) Results: In total, 3470 consultations were included in the evaluation, and in 70% of those, a therapeutic recommendation was given. Each specialty showed certain time frames with intense treatment demand, which partially overlapped. Nearly all therapy recommendations were statistically attached to a certain age (p < 0.001). (4) Conclusions: There is an exceptionally high need for the interdisciplinary assessment of patients with cleft formation. Some developmental phases are of particular importance with regard to regular follow-up and initiation of different treatment protocols. The therapy and checkup of cleft patients should be concentrated in specialized centers

Culturing of Melanocytes from the Equine Hair Follicle Outer Root Sheath

Hair follicles harbor a heterogeneous regenerative cell pool and represent a putative low-to-non-invasively available source of stem cells. We previously reported a technology for culturing human melanocytes from the hair follicle outer root sheath (ORS) for autologous pigmentation of tissue engineered skin equivalents. This study translated the ORS technology to horses. We de-veloped a culture of equine melanocytes from the ORS (eMORS) from equine forelock hair follicles cultured by means of an analogue human hair follicle-based in vitro methodology. The procedure was adjusted to equine physiology by addition of equine serum to the culture medium. The hair follicles were isolated by macerating forelock skin rests, enzymatically digested and subjected to air-medium-interface cultivation method. The procedure resulted in differentiated equine melanocytes, which exhibited typical morphology, presence of melanosomes, expression of cytoskeleton proteins vimentin, α-SMA, Sox2, S100ß and tyrosinase as well as tyrosinase activity followed by production of melanin. According to all assessed parameters, eMORS could be ranked as partially melanotic melanocytes. The results of the study offer an experimental base for further insight into hair follicle biology in equine and for comparative studies of hair follicles across different species