A Bridging Mechanism in the Homogenization of Brittle Composites with Soft Inclusions

We provide a homogenisation result for the energy-functional associated with a purely brittle composite whose microstructure is characterised by soft periodic inclusions embedded in a stiffer matrix. We show that the two constituents as above can be suitably arranged on a microscopic scale \u3b5 to obtain, in the limit as \u3b5 tends to zero, a homogeneous macroscopic energy-functional explicitly depending on the opening of the crack

Radiation and magnetic field effects on new semiconductor power devices for HL-LHC experiments

The radiation hardness of commercial Silicon Carbide and Gallium Nitride power MOSFETs is presented in this paper, for Total Ionizing Dose effects and Single Event Effects, under gamma, neutrons, protons and heavy ions. Similar tests are discussed for commercial DC-DC converters, also tested in operation under magnetic field

Protocollo di valutazione infettivologica pre-trapianto

Lo screening pre-trapianto dei potenziali candidati a un trapianto d\u2019organo \ue8 parte essenziale del trapianto di organi solidi. Obiettivi dello screening pre-trapianto sono: 1. identificazione di condizioni che controindicano il trapianto; 2. identificazione e trattamento di infezioni attive pre-trapianto; 3. definizione del livello di rischio infettivo e impostazione di strategie preventive post-trapianto. Nonostante vi sia un generale accordo sulle indagini di screening da effettuare, vi sono alcune variazioni tra i diversi centri. Allo scopo di armonizzare lo screening infettivologico pre-trapianto, viene schematicamente riportato, alla luce dell\u2019esperienza personale e dei dati di letteratura, lo stato dell\u2019arte inerente lo screening infettivologico pre-trapianto

Highly cross-linked bifunctional magnesium porphyrin-imidazolium bromide polymer: Unveiling the key role of co-catalysts proximity for CO2 conversion into cyclic carbonates

Highly cross-linked materials containing an imidazolium salt and magnesium porphyrin, either in the absence (TSP-Mg-imi) or in the presence (7a and 7b) of multi-walled carbon nanotubes (MWCNTs), were synthesized and used as heterogeneous bifunctional catalysts for the conversion of CO2 into cyclic carbonates. The metalloporphyrin moiety acts both as a “covalent swelling agent”, generating hybrids with high surface area, and as a Lewis acid co-catalytic species. TSP-Mg-imi produced excellent conversion and TONMg values, under solvent-free conditions, even at room temperature and with low catalytic loading (0.003 mol%). In terms of conversion and TONMg, TSP-Mg-imi exhibited better catalytic performance compared to a reference homogeneous system, demonstrating that the proximity between the metal centers and the nucleophilic site results in a synergistic effect during the catalytic cycle. The results of the computational study confirmed both the cooperative function and the significance of incorporating a co-catalytic species into the system

Electrochemical synthesis of new electroactive polymers from dithienylene-vinylene derivatives

peer reviewedHighly conjugated thiophene derivatives, based on thienylene-vinylene and thieneylene-vinylene-phenylene units, have been synthesized in order to examine: (i) the effect of such regular conjugated monomer structures on the polymerization; (ii) the optical and electrochemical properties of the corresponding conjugated polymers. The all-trans monomers have been prepared by a Wittig reaction and the polymers have then been synthesized electrochemically. The polymers are electrochromic and can be reversibly doped both oxidatively and reductively. Their electrochemical behavior and optical properties have been analysed on the basis of quantum-chemical calculations

Concepts and characteristics of the 'COST Reference Microplasma Jet'

Biomedical applications of non-equilibrium atmospheric pressure plasmas have attracted intense interest in the past few years. Many plasma sources of diverse design have been proposed for these applications, but the relationship between source characteristics and application performance is not well-understood, and indeed many sources are poorly characterized. This circumstance is an impediment to progress in application development. A reference source with well-understood and highly reproducible characteristics may be an important tool in this context. Researchers around the world should be able to compare the characteristics of their own sources and also their results with this device. In this paper, we describe such a reference source, developed from the simple and robust micro-scaled atmospheric pressure plasma jet (μ-APPJ) concept. This development occurred under the auspices of COST Action MP1101 'Biomedical Applications of Atmospheric Pressure Plasmas'. Gas contamination and power measurement are shown to be major causes of irreproducible results in earlier source designs. These problems are resolved in the reference source by refinement of the mechanical and electrical design and by specifying an operating protocol. These measures are shown to be absolutely necessary for reproducible operation. They include the integration of current and voltage probes into the jet. The usual combination of matching unit and power supply is replaced by an integrated LC power coupling circuit and a 5 W single frequency generator. The design specification and operating protocol for the reference source are being made freely available

Bimacrocyclic Effect in Anion Recognition by a Copper(II) Bicyclam Complex

The dicopper(II) complex of the bimacrocyclic ligand α,α′-bis(5,7-dimethyl-1,4,8,11-tetraazacyclotetradecan-6-yl)-o-xylene, 2, interacts with selected anions in dimethyl sulfoxide solution according to two different modes: (i) halides (Cl-, Br-, and I-) and N3- coordinate the two metal centers at the same time between the two macrocyclic subunits that face each other and (ii) anionic species that do not fit the bridging coordination mode (e.g., NCO-, SCN-, CH3COO-, NO3-, and H2PO4-) interact with copper(II) ions only at the "external" positions or their interaction is too weak to be detected. Occurrence of the bridging interaction is demonstrated by X-ray crystallographic studies performed on the adduct formed by [Cu2(2)]4+ with azide and by electron paramagnetic resonance investigation, as the anion coordination between the two copper(II) centers induces spin-spin coupling. Isothermal titration calorimetry experiments performed on [Cu2(2)]4+ and, for comparison, on [(5,7-dimethyl-6-benzyl-1,4,8,11-tetraazacyclotetradecane)copper(II)], representing the mononuclear analogue, allowed determination of thermodynamic parameters (log K, ΔH, and TΔS) associated with the considered complex/anion equilibria. Thermodynamic data showed that adducts formed by [Cu2(2)]4+ with halides and azide benefit from an extra stability that can be explained on the basis of the anion advantage of simultaneously binding the two metal centers, i.e., in terms of the bimacrocyclic effect

White light emitting silsesquioxane based materials: The importance of a ligand with rigid and directional arms

The synthesis of a novel polyhedral oligomeric silsesquioxane functionalized with eight rigid and directional terpyridine-based arms (Ter-POSS) was successfully achieved via a Sonogashira reaction. The POSS based ligand was extensively characterized using different techniques including 1H, 13C and 29Si NMR as well as UV-Vis and fluorescence spectroscopies. The assembly of these nano-caged units in the presence of different transition metal ions (Fe2+, Zn2+ and Cu2+) as well as of a cation from the lanthanides (Eu3+) was investigated using absorption and emission spectroscopies. The final materials display an evident emission in different regions of the visible spectrum as a function of the cation employed. Additional insights into the structural organization of Ter-POSS in the presence of metal cations were obtained via molecular mechanics and molecular dynamics simulations. The polymeric material resulting from the complexation with europium displays a white light emission ascribed to the presence of combined contributions from the blue, green and red regions. The final self-assembled organizations display an increased quantum yield with the highest value (29.6%) obtained in the presence of Zn2+. Moreover, the white-light emitting europium-based nanostructure exhibits one of the highest quantum yields reported in the literature for similar solids