Identification of lead vacancy defects in lead halide perovskites

Perovskite photovoltaics advance rapidly, but questions remain regarding point defects: while experiments have detected the presence of electrically active defects no experimentally confirmed microscopic identifications have been reported. Here we identify lead monovacancy (VPb) defects in MAPbI3 (MA = CH3NH3+) using positron annihilation lifetime spectroscopy with the aid of density functional theory. Experiments on thin film and single crystal samples all exhibited dominant positron trapping to lead vacancy defects, and a minimum defect density of ~3 7 1015 cm−3 was determined. There was also evidence of trapping at the vacancy complex (VPbVI)− in a minority of samples, but no trapping to MA-ion vacancies was observed. Our experimental results support the predictions of other first-principles studies that deep level, hole trapping, VPb2−, point defects are one of the most stable defects in MAPbI3. This direct detection and identification of a deep level native defect in a halide perovskite, at technologically relevant concentrations, will enable further investigation of defect driven mechanisms

CSS Antimony Selenide Film Morphology and High Efficiency PV Devices

Knowledge of close-space sublimation (CSS) Sb 2 Se 3 growth conditions is vital for proper understanding of PV performance, and optimization of Sb 2 Se 3 devices. In this work, various growth parameters have been studied and the resulting Sb 2 Se 3 films have been characterized using SEM, XRD and optical transmission measurements, thus illustrating the desired properties for high device performance. PV devices were fabricated using TiO 2 as a window layer combined with P3HT or PTB7 as the hole transport material, resulting in V oc =0.42 V, J sc =33.4 mAcm -2 , FF = 43.2% and PCE = 6.06% for P3HT

NASA's Functional Task Test: High Intensity Exercise Improves the Heart Rate Response to a Stand Test Following 70 Days of Bedrest

Cardiovascular adaptations due to spaceflight are modeled with 6deg head-down tilt bed rest (BR) and result in decreased orthostatic tolerance. We investigated if high-intensity resistive and aerobic exercise with and without testosterone supplementation would improve the heart rate (HR) response to a 3.5-min stand test and how quickly these changes recovered following BR. During 70 days of BR male subjects performed no exercise (Control, n=10), high intensity supine resistive and aerobic exercise (Exercise, n=9), or supine exercise plus supplemental testosterone (Exercise+T, n=8; 100 mg i.m., weekly in 2-week on/off cycles). We measured HR for 2 min while subjects were prone and for 3 min after standing twice before and 0, 1, 6, and 11 days after BR. Mixed-effects linear regression models were used to evaluate group, time, and interaction effects. Compared to pre-bed rest, prone HR was elevated on BR+0 and BR+1 in Control, but not Exercise or Exercise+T groups, and standing HR was greater in all 3 groups. The increase in prone and standing HR in Control subjects was greater than either Exercise or Exercise+T groups and all groups recovered by BR+6. The change in HR from prone to standing more than doubled on BR+0 in all groups, but was significantly less in the Exericse+T group compared to the Control, but not Exercise group. Exercise reduces, but does not prevent the increase in HR observed in response to standing. The significantly lower HR response in the Exercise+T group requires further investigation to determine physiologic significance

Chemical etching of Sb2Se3 solar cells: surface chemistry and back contact behaviour

The effect of (NH4)2S and CS2 chemical etches on surface chemistry and contacting in Sb2Se3 solar cells was investigated via a combination of x-ray photoemission spectroscopy (XPS) and photovoltaic device analysis. Thin film solar cells were produced in superstrate configuration with an absorber layer deposited by close space sublimation. Devices of up to 5.7% efficiency were compared via current–voltage measurements (J–V) and temperature-dependent current–voltage (J–V–T) analysis. XPS analysis demonstrated that both etching processes were successful in removing Sb2O3 contamination, while there was no decrease in free elemental selenium content by either etch, in contrast to prior work. Using J–V–T analysis the removal of Sb2O3 at the back surface in etched samples was found to improve contacting by reducing the potential barrier at the back contact from 0.43 eV to 0.26 eV and lowering the series resistance. However, J–V data showed that due to the decrease in shunt resistance and short-circuit current as a result of etching, the devices show a lower efficiency following both etches, despite a lowering of the series resistance. Further optimisation of the etching process yielded an improved efficiency of 6.6%. This work elucidates the role of surface treatments in Sb2Se3 devices and resolves inconsistencies in previously published works

Comparison of pharmacist managed anticoagulation with usual medical care in a family medicine clinic

Background The beneficial outcomes of oral anticoagulation therapy are dependent upon achieving and maintaining an optimal INR therapeutic range. There is growing evidence that better outcomes are achieved when anticoagulation is managed by a pharmacist with expertise in anticoagulation management rather than usual care by family physicians. This study compared a pharmacist managed anticoagulation program (PC) to usual physician care (UC) in a family medicine clinic. Methods A retrospective cohort study was carried out in a family medicine clinic which included a clinical pharmacist. In 2006, the pharmacist assumed anticoagulation management. For a 17-month period, the PC group (n = 112) of patients on warfarin were compared to the UC patients (n = 81) for a similar period prior to 2006. The primary outcome was the percentage of time patients' INR was in the therapeutic range (TTR). Secondary outcomes were the percentage of time in therapeutic range within ± 0.3 units of the recommended range (expanded TTR) and percentage of time the INR was >5.0 or <1.5. Results The baseline characteristics were similar between the groups. Fifty-five percent of the PC group was male with a mean age of 67 years; 51% of the UC group was male with a mean age of 71 years. The most common indications for warfarin in both groups were atrial fibrillation, mechanical heart valves and deep vein thrombosis. The TTR was 73% for PC and 65% for UC (p 5 were 0.3% for PC patients and 0.1% for UC (p < 0.0001). Conclusion The pharmacist-managed anticoagulation program within a family practice clinic compared to usual care by the physicians achieved significantly better INR control as measured by the percentage of time patients' INR values were kept in both the therapeutic and expanded range. Based on the results of this study, a collaborative family practice clinic using pharmacists and physicians may be an effective model for anticoagulation management with these results verified in future prospective randomized studies

Characterization of a Cdc42 Protein Inhibitor and Its Use as a Molecular Probe

Cdc42 plays important roles in cytoskeleton organization, cell cycle progression, signal transduction, and vesicle trafficking. Overactive Cdc42 has been implicated in the pathology of cancers, immune diseases, and neuronal disorders. Therefore, Cdc42 inhibitors would be useful in probing molecular pathways and could have therapeutic potential. Previous inhibitors have lacked selectivity and trended toward toxicity. We report here the characterization of a Cdc42-selective guanine nucleotide binding lead inhibitor that was identified by high throughput screening. A second active analog was identified via structure-activity relationship studies. The compounds demonstrated excellent selectivity with no inhibition toward Rho and Rac in the same GTPase family. Biochemical characterization showed that the compounds act as noncompetitive allosteric inhibitors. When tested in cellular assays, the lead compound inhibited Cdc42-related filopodia formation and cell migration. The lead compound was also used to clarify the involvement of Cdc42 in the Sin Nombre virus internalization and the signaling pathway of integrin VLA-4. Together, these data present the characterization of a novel Cdc42-selective allosteric inhibitor and a related analog, the use of which will facilitate drug development targeting Cdc42-related diseases and molecular pathway studies that involve GTPases.This work was supported by National Science Foundation (NSF) Grant MCB0956027 and National Institutes of Health Grant R03 MH081231-01 from the Molecular Libraries Program (to A. W. N.); University of New Mexico Center for Molecular Discovery Molecular Libraries Probe Production Centers (UNMCMD MLPCN) National Institutes of Health Grants U54MH084690 and R01HL081062 (to L. A. S.); UNM National Center for Research Resources (NCRR) Grant 5P20RR016480 (to L. G. H.); National Institutes of Health Grant R21 CA170375-01 through the NCI (to A. W. N., L. G. H., and J. E. G.); National Institutes of Health Grants NS066429 and AI092130 (to T. B.); and University of Kansas Specialized Chemistry Center (KUSCC) MLPCN National Institutes of Health Grant U54HG005031 (to J. A.)

Natural Band Alignments and Band Offsets of Sb2Se3 Solar Cells

Sb2Se3 is a promising material for use in photovoltaics, but the optimum device structure has not yet been identified. This study provides band alignment measurements between Sb2Se3, identical to that used in high-efficiency photovoltaic devices, and its two most commonly used window layers, namely, CdS and TiO2. Band alignments are measured via two different approaches: Anderson’s rule was used to predict an interface band alignment from measured natural band alignments, and the Kraut method was used in conjunction with hard X-ray photoemission spectroscopy to directly measure the band offsets at the interface. This allows examination of the effect of interface formation on the band alignments. The conduction band minimum (CBM) of TiO2 is found by the Kraut method to lie 0.82 eV below that of Sb2Se3, whereas the CdS CBM is only 0.01 eV below that of Sb2Se3. Furthermore, a significant difference is observed between the natural alignment- and Kraut method-determined offsets for TiO2/Sb2Se3, whereas there is little difference for CdS/Sb2Se3. Finally, these results are related to device performance, taking into consideration how these results may guide the future development of Sb2Se3 solar cells and providing a methodology that can be used to assess band alignments in device-relevant systems

Band alignment of Sb2O3 and Sb2Se3

Antimony selenide (Sb2Se3) possesses great potential in the field of photovoltaics (PV) due to its suitable properties for use as a solar absorber and good prospects for scalability. Previous studies have reported the growth of a native antimony oxide (Sb2O3) layer at the surface of Sb2Se3 thin films during deposition and exposure to air, which can affect the contact between Sb2Se3 and subsequent layers. In this study, photoemission techniques were utilized on both Sb2Se3 bulk crystals and thin films to investigate the band alignment between Sb2Se3 and the Sb2O3 layer. By subtracting the valence band spectrum of an in situ cleaved Sb2Se3 bulk crystal from that of the atmospherically contaminated bulk crystal, a valence band offset (VBO) of −1.72 eV is measured between Sb2Se3 and Sb2O3. This result is supported by a −1.90 eV VBO measured between Sb2O3 and Sb2Se3 thin films via the Kraut method. Both results indicate a straddling alignment that would oppose carrier extraction through the back contact of superstrate PV devices. This work yields greater insight into the band alignment of Sb2O3 at the surface of Sb2Se3 films, which is crucial for improving the performance of these PV devices

Vacancy-Ordered Double Perovskite Cs2TeI6 Thin Films for Optoelectronics

Alternatives to lead- and tin-based perovskites for photovoltaics and optoelectronics are sought that do not suffer from the disadvantages of toxicity and low device efficiency of present-day materials. Here we report a study of the double perovskite Cs2TeI6, which we have synthesized in thin film form for the first time. Exhaustive trials concluded that spin coating CsI and TeI4 using an anti-solvent method produced uniform films, confirmed as Cs2TeI6 by XRD with Rietveld analysis. They were stable up to 250°C, had an optical band gap of ~1.5 eV, absorption coefficients of ~6 x 104 cm-1, carrier lifetimes of ~2.6 ns (unpassivated 200 nm film), a work function of 4.95 eV and had p-type surface conductivity. Vibrational modes probed by Raman and FTIR spectroscopy showed resonances qualitatively consistent with DFT Phonopy-calculated spectra, offering another route for phase confirmation. It was concluded that the material is a candidate for further study as a potential optoelectronic or photovoltaic material