14 research outputs found

    A modelling exercise on the importance of ternary alkaline earth carbonate species of uranium(VI) in the inorganic speciation of natural waters

    Get PDF
    International audiencePredictive modelling of uranium speciation in natural waters can be achieved using equilibrium thermodynamic data and adequate speciation software. The reliability of such calculations is highly dependent on the equilibrium reactions that are considered as entry data, and the values chosen for the equilibrium constants. The working group " Speciation " of the CETAMA (Analytical methods establishment committee of the French Atomic Energy commission, CEA) has organized a modelling exercise, including four participants, in order to compare modellers' selections of data and test thermodynamic data bases regarding the calculation of U(VI) inorganic speciation. Six different compositions of model waters were chosen so that to check the importance of ternary alkaline earth carbonate species of U(VI) on the aqueous speciation, and the possible uranium solid phases as solubility-limiting phases. The comparison of the results from the participants suggests i) that it would be highly valuable for end-users to review thermodynamic constants of ternary carbonate species of U(VI) in a consistent way and implement them in available speciation data bases, and ii) stresses the necessary care when using data bases to avoid biases and possible erroneous calculations

    Influence of Uranium on Bacterial Communities: A Comparison of Natural Uranium-Rich Soils with Controls

    Get PDF
    This study investigated the influence of uranium on the indigenous bacterial community structure in natural soils with high uranium content. Radioactive soil samples exhibiting 0.26% - 25.5% U in mass were analyzed and compared with nearby control soils containing trace uranium. EXAFS and XRD analyses of soils revealed the presence of U(VI) and uranium-phosphate mineral phases, identified as sabugalite and meta-autunite. A comparative analysis of bacterial community fingerprints using denaturing gradient gel electrophoresis (DGGE) revealed the presence of a complex population in both control and uranium-rich samples. However, bacterial communities inhabiting uraniferous soils exhibited specific fingerprints that were remarkably stable over time, in contrast to populations from nearby control samples. Representatives of Acidobacteria, Proteobacteria, and seven others phyla were detected in DGGE bands specific to uraniferous samples. In particular, sequences related to iron-reducing bacteria such as Geobacter and Geothrix were identified concomitantly with iron-oxidizing species such as Gallionella and Sideroxydans. All together, our results demonstrate that uranium exerts a permanent high pressure on soil bacterial communities and suggest the existence of a uranium redox cycle mediated by bacteria in the soil

    STAR (Contract Number: Fission-2010-3.5.1-269672) DELIVERABLE (D-N°1.1) Performance Report

    Get PDF

    Operational Method to Easily Determine the Available Fraction of a Contaminant in Soil and the Associated Soil-Solution Distribution Coefficient

    No full text
    International audienceWell understanding the solid/solution partitioning of a contaminant is of first importance to determine its residence time in the environment, environmental availability, or bioavailability. Currently, parameters of contaminant transfer models are derived from two conceptually different approaches: one considering that the totality of the contaminant is in equilibrium between the solid and the solution and the other one considering that only a part of the contaminant can be transferred from the solid to the solution without considering equilibrium. Our work offers to reconcile these two approaches by assuming that the contaminant associated with the solid is present under two fractions: one available at equilibrium with the solution, and a second one not available and nontransferable to the solution. We propose to use simple operational batch methods (successive desorption batch experiments, or batch desorption conducted at different volume of solution/mass of solid (V/M) ratios) to check this assumption and to determine the real available contaminant fraction (i.e., the contaminant in the solid which can be at equilibrium with the solution) and its associated solid/solution distribution coefficient. The robustness of the proposed method was tested on simulated conditions, on experiments performed to validate the approach, and on the reinterpretation of literature data. Finally, the use of the available contaminant fraction and its associated solid/solution distribution coefficient in transfer models can improve the predictive modeling of contaminant transfer in the soil/solution/plant system

    Radioecological Risk Assessment of Low Selenium Concentrations through Genetic Fingerprints and Metabolic Profiling of Soil Bacterial Communities

    No full text
    International audienceIn a context of environmental risk assessment of nuclear 79Se radionuclide, the impact of low Se-selenite concentrations (0.008 and 8 mg kg−1) on bacterial communities of two soils, a silty clay loam and a sandy soil, was investigated over a 6-month incubation time. This Se-selenite was partially labelled with 75Se. The state of the Se-impacted bacterial communities was analyzed through total bacterial counts, DNA fingerprints (ARISA profiles) and metabolic profiling (carbon substrate utilization patterns). Furthermore, the genetic diversity of bacterial populations involved in Se volatilization was evaluated by tpm (thiopurine methyltransferase gene) profiling. Emissions of 75Se and CaCl2- extractable 75Se were measured by γ-spectrometry and scintillation analysis. Se-selenite inputs changed transiently the substrate utilization patterns of bacterial communities but did not affect the other indicators. Se volatilization was at its highest level just after adding Se-selenite and for about 1 week. This volatilization was proportional to the added Se-selenite concentrations. It was 100-fold higher in silty clay loam, even though Se bioavailability was reduced in this soil. The soils were amended with crushed grass 3 months after the addition of Se-selenite. This organic amendment affected the organization of bacterial communities and increased the Se-volatilizing activities of both soils. Original soil organic carbon and bacterial diversity and activities seemed responsible for the different levels of Se emissions observed in soils. tpm lineages, encoding Se methyltransferases, were detected in both soils, confirming the broad distribution of tpm-harbouring bacteria and their probable role in the emissions of volatile Se. Five distinct groups of tpm were recorded per soil, with tpmI lineage being detected throughout the incubation period. This study demonstrates the ability of bacterial communities at volatilizing Se concentrations inferior to geochemical backgrounds and suggests that a probable transfer of nuclear Se will occur through volatilization after an environmental spil

    Uncoupling Aluminum Toxicity From Aluminum Signals in the STOP1 Pathway

    No full text
    International audienceAluminum (Al) is a major limiting factor for crop production on acidic soils, inhibiting root growth and plant development. At acidic pH (pH < 5.5), Al 3+ ions are the main form of Al present in the media. Al 3+ ions have an increased solubility at pH < 5.5 and result in plant toxicity. At higher pH, the free Al 3+ fraction decreases in the media, but whether plants can detect Al at these pHs remain unknown. To cope with Al stress, the SENSITIVE TO PROTON RHIZOTOXICITY1 (STOP1) transcription factor induces AL-ACTIVATED MALATE TRANSPORTER1 ( ALMT1 ), a malate-exuding transporter as a strategy to chelate the toxic ions in the rhizosphere. Here, we uncoupled the Al signalling pathway that controls STOP1 from Al toxicity using wild type (WT) and two stop1 mutants carrying the pALMT1:GUS construct with an agar powder naturally containing low amounts of phosphate, iron (Fe), and Al. We combined gene expression [real-time PCR (RT-PCR) and the pALMT1:GUS reporter], confocal microscopy ( pSTOP1:GFP-STOP1 reporter), and root growth measurement to assess the effects of Al and Fe on the STOP1-ALMT1 pathway in roots. Our results show that Al triggers STOP1 signaling at a concentration as little as 2 μM and can be detected at a pH above 6.0. We observed that at pH 5.7, 20 μM AlCl 3 induces ALMT1 in WT but does not inhibit root growth in stop1 Al-hypersensitive mutants. Increasing AlCl 3 concentration (>50 μM) at pH 5.7 results in the inhibition of the stop1 mutants primary root. Using the green fluorescent protein (GFP)-STOP1 and ALMT1 reporters, we show that the Al signal pathway can be uncoupled from the Al toxicity on the root. Furthermore, we observe that Al strengthens the Fe-mediated inhibition of primary root growth in WT, suggesting an interaction between Fe and Al on the STOP1-ALMT1 pathway

    Uncoupling Aluminum Toxicity From Aluminum Signals in the STOP1 Pathway

    No full text
    International audienceAluminum (Al) is a major limiting factor for crop production on acidic soils, inhibiting root growth and plant development. At acidic pH (pH < 5.5), Al 3+ ions are the main form of Al present in the media. Al 3+ ions have an increased solubility at pH < 5.5 and result in plant toxicity. At higher pH, the free Al 3+ fraction decreases in the media, but whether plants can detect Al at these pHs remain unknown. To cope with Al stress, the SENSITIVE TO PROTON RHIZOTOXICITY1 (STOP1) transcription factor induces AL-ACTIVATED MALATE TRANSPORTER1 ( ALMT1 ), a malate-exuding transporter as a strategy to chelate the toxic ions in the rhizosphere. Here, we uncoupled the Al signalling pathway that controls STOP1 from Al toxicity using wild type (WT) and two stop1 mutants carrying the pALMT1:GUS construct with an agar powder naturally containing low amounts of phosphate, iron (Fe), and Al. We combined gene expression [real-time PCR (RT-PCR) and the pALMT1:GUS reporter], confocal microscopy ( pSTOP1:GFP-STOP1 reporter), and root growth measurement to assess the effects of Al and Fe on the STOP1-ALMT1 pathway in roots. Our results show that Al triggers STOP1 signaling at a concentration as little as 2 μM and can be detected at a pH above 6.0. We observed that at pH 5.7, 20 μM AlCl 3 induces ALMT1 in WT but does not inhibit root growth in stop1 Al-hypersensitive mutants. Increasing AlCl 3 concentration (>50 μM) at pH 5.7 results in the inhibition of the stop1 mutants primary root. Using the green fluorescent protein (GFP)-STOP1 and ALMT1 reporters, we show that the Al signal pathway can be uncoupled from the Al toxicity on the root. Furthermore, we observe that Al strengthens the Fe-mediated inhibition of primary root growth in WT, suggesting an interaction between Fe and Al on the STOP1-ALMT1 pathway
    corecore