Using Short, Silent Data Story Videos to Engage Contemporary Extension Audiences

Online video can be an effective way for Extension to share data stories. Short videos that convey their messages without sound can maximize impact on several social media sites, including Facebook and Twitter. A pilot video was produced in this style; shared on Twitter, Facebook, and YouTube; and evaluated on the basis of the social media platforms\u27 available metrics. To meet clientele where they are, Extension must stay up to date with the latest trends in online information sharing. This article addresses the rationale behind and techniques for creating short videos that communicate without sound

Comparison of The Kois Dento-Facial Analyzer System with an Earbow for Mounting a Maxillary Cast

Statement of problem: The Kois Dento-Facial Analyzer System (KDFA) is used by clinicians to mount maxillary casts and evaluate and treat patients. Limited information is available for understanding whether the KDFA should be considered as an alternative to an earbow. Purpose: The purpose of this study was to evaluate maxillary casts mounted using the KDFA with casts mounted using Panadent\u27s Pana-Mount Facebow (PMF). Both articulation methods were compared against a lateral cephalometric radiograph. Material and methods: Fifteen dried human skulls were used. Lateral cephalometric radiographs and 2 maxillary impressions were made of each skull. One cast from each skull was mounted on an articulator by means of the KDFA and the other by using the PMF. A standardized photograph of each articulation was made, and the distance from the articular center to the incisal edge position and the occlusal plane angle were measured. The distance from condylar center to the incisal edge and the occlusal plane angle were measured from cephalometric radiographs. Finally, the 3-dimensional position of each articulation was determined with a Panadent CPI-III. A randomized complete block design analysis of variance (RCBD) and post hoc tests (Tukey-Kramer HSD) (α=.05) were used to evaluate the occlusal plane angle and axis-central incisor distance. A paired 2-sample t test for means (α=.05) was used to compare the X, Y, and Z distance at the right and left condyle. Results: The KDFA and PMF mounted the maxillary cast in a position that was not statistically different from the skull when comparing the occlusal plane angle (P=.165). Both the KDFA and the PMF located the maxillary central incisor edge position in a significantly different position compared with the skull (P=.001) but were not significantly different from each other. The 3-dimensional location of the maxillary casts varied at the condyles by approximately 9 to 10.3 mm. Conclusion: The KDFA mounted the maxillary cast in a position that was not statistically different from the PMF when comparing the incisal edge position and the occlusal plane angle. Both the KDFA and the PMF located the maxillary incisal edge position in a significantly different position compared with the anatomic position on dried human skulls

Rail roughness and rolling noise in tramways

Companies which manage railway networks have to cope continually with the problem of operating safety and maintenance intervention issues related to rail surface irregularities. A lot of experience has been gained in recent years in railway applications but the case of tramways is quite different; in this field there are no specific criteria to define any intervention on rail surface restoration. This paper shows measurements carried out on some stretches of a tram network with the CAT equipment (Corrugation Analysis Trolley) for the principal purpose of detecting different states of degradation of the rails and identifying a level of deterioration to be associated with the need for maintenance through rail grinding. The measured roughness is used as an input parameter into prediction models for both rolling noise and ground vibration to show the potential effect that high levels of roughness can have in urban environment. Rolling noise predictions are also compared with noise measurements to illustrate the applicability of the modelling approach. Particular attention is given to the way the contact filter needs to be modelled in the specific case of trams that generally operate at low speed. Finally an empirical approach to assess vibration levels in buildings is presented

The MiALA Fine Arts Interest Group: Making Connections Across the Mitten State

The Michigan Academic Library Association (MiALA), established in 2014, is the leading professional organization for academic librarians in the state of Michigan, and a chapter of the Association of College & Research Libraries (ACRL). Within the organization are several established interest groups that reflect a wide variety of interests across academic librarianship. The MiALA Fine Arts Interest Group was formed in 2017 to serve as a forum for academic librarians who work with users and collections in the fine arts, including but not limited to, visual art, creative writing, dance, film, media production, music, and theatre to share ideas, collaborate, and develop professionally in order to best serve our constituencies’ unique needs. The Interest Group advocates and communicates the work of arts library organizations, such as the Music Library Association and the MLA-Midwest Chapter, with hopes for communication from other arts-library organizations in the future, such as TLA and ARLIS-NA. Through virtual meetings, the group has brought together librarians across Michigan for collaborative efforts, including conference presentations and feedback on day-to-day projects. In this session, three members of the Interest Group share how the group started, the benefits of connecting with local arts librarians, and future plans for the group. Librarians interested in making connections with other professionals across their region will gain ideas for starting similar groups and fostering relationships with local colleagues

Differential Uptake of Gold Nanoparticles by 2 Species of Tadpole, the Wood Frog (Lithobates Sylvaticus) and the Bullfrog (Lithobates Catesbeianus)

Engineered nanoparticles are aquatic contaminants of emerging concern that exert ecotoxicological effects on a wide variety of organisms. We exposed cetyltrimethylammonium bromide–capped spherical gold nanoparticles to wood frog and bullfrog tadpoles with conspecifics and in combination with the other species continuously for 21 d, then measured uptake and localization of gold. Wood frog tadpoles alone and in combination with bullfrog tadpoles took up significantly more gold than bullfrogs. Bullfrog tadpoles in combination with wood frogs took up significantly more gold than controls. The rank order of weight-normalized gold uptake was wood frogs in combination \u3e wood frogs alone \u3e bullfrogs in combination \u3e bullfrogs alone \u3e controls. In all gold-exposed groups of tadpoles, gold was concentrated in the anterior region compared with the posterior region of the body. The concentration of gold nanoparticles in the anterior region of wood frogs both alone and in combination with bullfrogs was significantly higher than the corresponding posterior regions. We also measured depuration time of gold in wood frogs. After 21 d in a solution of gold nanoparticles, tadpoles lost \u3e83% of internalized gold when placed in gold-free water for 5 d. After 10 d in gold-free water, tadpoles lost 94% of their gold. After 15 d, gold concentrations were below the level of detection. Our finding of differential uptake between closely related species living in similar habitats with overlapping geographical distributions argues against generalizing toxicological effects of nanoparticles for a large group of organisms based on measurements in only one species

Cloning of the Complete Gene for Carcinoembryonic Antigen

Carcinoembryonic antigen (CEA) is a widely used tumor marker, especially in the surveillance of colonic cancer patients. Although CEA is also present in some normal tissues, it is apparently expressed at higher levels in tumorous tissues than in corresponding normal tissues. As a first step toward analyzing the regulation of expression of CEA at the transcriptional level, we have isolated and characterized a cosmid clone (cosCEA1), which contains the entire coding region of the CEA gene. A close correlation exists between the exon and deduced immunoglobulin-like domain borders. We have determined a cluster of transcriptional starts for CEA and the closely related nonspecific cross-reacting antigen (NCA) gene and have sequenced their putative promoters. Regions of sequence homology are found as far as approximately 500 nucleotides upstream from the translational starts of these genes, but farther upstream they diverge completely. In both cases we were unable to find classic TATA or CAAT boxes at their expected positions. To characterize the CEA and NCA promoters, we carried out transient transfection assays with promoter-indicator gene constructs in the CEA-producing adenocarcinoma cell line SW403, as well as in nonproducing HeLa cells. A CEA gene promoter construct, containing approximately 400 nucleotides upstream from the translational start, showed nine times higher activity in the SW403 than in the HeLa cell line. This indicates that cis-acting sequences which convey cell type-specific expression of the CEA gene are contained within this region

Himmelfarb 911! Using LibGuides and Scenarios to Inform and Train Library Staff on Disaster Response

Objectives Create and update disaster planning and response materials so that they are accessible at time of need and educate the library\u27s staff on the library\u27s safety and emergency response policies and procedures. Introduction This urban health sciences library has experienced a number of potentially serious disaster incidents in the local region in the last fifteen years including terrorist attack, earthquake, fire, tornado, and hurricane. The library has a standing Disaster Planning committee which has produced extensive policy and planning documents for disaster response including a Disaster Planning and Response Manual, a Continuity of Operations Plan, a Pocket Response Plan, and a staff telephone tree. The accessibility and usability of these documents along with staff training on emergency policies and procedures are a high priority. Methods During the last two fiscal years, the standing committee has engaged in initiatives to educate staff members and provide a stable, cloud based, centralized platform for resources. A Himmelfarb911 LibGuide was established in fall of 2013 and includes all of the library\u27s disaster documents, links to outside resources, and photo documentation of facilities, collections, and art work in the Library. Online availability of resources complements printed copies which are held at key locations both on- and off-site. In addition, the committee has engaged staff in disaster scenarios (Snowmaggeddon, severe thunderstorm, active shooter, etc.) at meetings to discuss appropriate responses and resources. The committee has also organized training with the Univerisity\u27s Office of Safety and Security to brief staff on evacuation and shelter in place procedures, and other important safety information. Results The disaster scenarios elicited enthusiastic response and discussion among library staff members and provided an opportunity for staff to ask questions and help refine library policies. Both initiatives help ensure that staff will be well prepared for whatever disasters or emergencies they might face on the job

Using 360-Degree Video for Immersive Learner Engagement

A 360-degree video is a powerful tool that can bring learners into environments that would otherwise be inaccessible. These videos are simultaneously recorded in all directions, allowing the viewer to control viewing direction. Viewers can experience these videos on a computer, smartphone, or tablet or with a virtual reality headset. Camera and software equipment needed to produce 360-degree videos is affordable, allowing Extension educators to produce their own videos. This article addresses the practical aspects of producing 360-degree-video content that can be shared online or in a classroom setting

Comparing cover crop research in farmer-led and researcher-led experiments in the Western Corn Belt

Cover crops can mitigate soil degradation and nutrient loss and can be used to achieve continuous living cover in cropping systems, although their adoption in the Western Corn Belt of the United States remains low. It is increasingly recognized that cover crop integration into corn (Zea mays L.)-based crop rotations is complex, requiring site and operation specific management. In this review, we compared on-farm, farmer-led field scale trials to researcher-led trials carried out in small plots on University of Nebraska-Lincoln experiment stations. Although there is a range of cover crop research conducted in the state, there is no synthesis of the scope and key results of such eorts. Common cover crop challenges and goals in the state are similar to those reported nationwide; challenges include adequate planting timing, associated costs, and weather, while a top goal of cover crop use is to improve soil health. Farmer-led trials most frequently compared a cover crop to a no-cover crop control, likely reflecting a desire to test a basic design determining site-specific performance. Both researcher-led and farmer-led trials included designs testing cash crop planting timing, while some portion of farmer-led trials tested cover crop seeding rates, which are directly related to reported cover crop challenges. Farmer-led trials were carried out on a greater variety of soils, including sandy soils, whereas sandy soils were absent from researcher-led trials. More than half of farmer- led experiments were conducted on fields with slopes of 6–17% while most researcher-led experiments were conducted on fields with slopes of \u3c1%. Mean cover crop biomass production was 600 kg/ha in farmer-led and 2,000 kg/ha in researcher-led trials. Crop yields were not significantly aected by cover crops in either farmer-led or researcher-led trials. Such comparisons demonstrate that in some instances, cover crop research is addressing challenges, and in some instances, it could be expanded. This synthesis expands our knowledge base in a way that can promote co-learning between dierent scales of experiments, and ultimately, reduce risks associated with cover crop management and further promote continuous living cover of agricultural landscapes