Dimensionality effects in the LDOS of ferromagnetic hosts probed via STM: spin-polarized quantum beats and spin filtering

We theoretically investigate the local density of states (LDOS) probed by a STM tip of ferromagnetic metals hosting a single adatom and a subsurface impurity. We model the system via the two-impurity Anderson Hamiltonian. By using the equation of motion with the relevant Green functions, we derive analytical expressions for the LDOS of two host types: a surface and a quantum wire. The LDOS reveals Friedel-like oscillations and Fano interference as a function of the STM tip position. These oscillations strongly depend on the host dimension. Interestingly, we find that the spin-dependent Fermi wave numbers of the hosts give rise to spin-polarized quantum beats in the LDOS. While the LDOS for the metallic surface shows a damped beating pattern, it exhibits an opposite behavior in the quantum wire. Due to this absence of damping, the wire operates as a spatially resolved spin filter with a high efficiency.Comment: revised tex

Bioreduction of substituted a-tetralones promoted by Daucus carota root

The bioreduction of a series of substituted a-tetralones, carried out using Daucus carota root (carrot), afforded the corresponding homochiral a-tetralols in variable conversions (9 to 90%) and excellent enantiomeric excesses. Two of the assayed a-tetralones were resistant to the bioreduction conditions. The absolute configurations of four a-tetralols were assigned as being (S), by comparison to the (S)-enantiomers obtained by kinetic resolution promoted by CALB-catalysed acetylation. Additionally, the new 5-methoxy-6-methyl-1-tetralone was synthesized in seven steps from 3-methylsalicylic acid.FAPESPCoordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES)CNP

Weed flora in rice areas under distinct cropping systems, herbicide and irrigation managements

We aimed to evaluate the incidence of weeds in the pre-planting of the summer crop as a function of planting system, herbicide use and irrigation management. The experiment was installed in field conditions, in RBD and 3 x 2 factorial scheme with eight replications. Treatments consisted in submitting rice to three management factors: water management – continuously flooded or intermittend irrigation (Factor A), coupled to the application (traditional control) or not (semi-ecological system) of herbicides (Factor B), and planting system – conventional soil tillage, minimum tillage and no till systems (Factor C). One year after rice cultivation, preceding the planting of the next cropping season, phytosociological evaluations of the weed communities were carried out. We assessed the overall infestation and weed species composition, which were classified by their respective density, frequency and dominance. We also estimated the diversity coefficients of Simpson and Shannon Weiner, and the sustainability coefficient of Shannon; treatments were also grouped by similarity in weed composition. In flood-irrigated rice, no till provides the lowest levels of weed infestation and, together with the conventional cropping system, results in values closer to the ecological sustainability; The application of herbicides in flooded rice crops reduces weed infestation, increases diversity and equalizes the ecological sustainability, compared to areas without the application of weed management methods. However, chemical control leads to the selection of resistant or tolerant species to herbicides, such as Polypogon sp.; Both continuous and intermittent water management systems did not cause changes in the level of infestation, composition or diversity coefficients

Sacrificial Adhesive Bonding: A Powerful Method For Fabrication Of Glass Microchips

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)A new protocol for fabrication of glass microchips is addressed in this research paper. Initially, the method involves the use of an uncured SU-8 intermediate to seal two glass slides irreversibly as in conventional adhesive bonding-based approaches. Subsequently, an additional step removes the adhesive layer from the channels. This step relies on a selective development to remove the SU-8 only inside the microchannel, generating glass-like surface properties as demonstrated by specific tests. Named sacrificial adhesive layer (SAB), the protocol meets the requirements of an ideal microfabrication technique such as throughput, relatively low cost, feasibility for ultra largescale integration (ULSI), and high adhesion strength, supporting pressures on the order of 5 MPa. Furthermore, SAB eliminates the use of high temperature, pressure, or potential, enabling the deposition of thin films for electrical or electrochemical experiments. Finally, the SAB protocol is an improvement on SU-8-based bondings described in the literature. Aspects such as substrate/resist adherence, formation of bubbles, and thermal stress were effectively solved by using simple and inexpensive alternatives.5Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)FAPESP [2010/08559-9]CNPq [482696/2011-7

Phytochemical prospection and larvicidal bioactivity of the janaguba (Himatanthus drasticus) Mart. Plumel (Apocynaceae) latex against Aedes aegypti L. (Diptera: Culicidae)

Abstract The aim of this study was to carry out phytochemical prospecting and evaluate the larvicidal activity of Himatanthus drasticus latex extracts against Aedes aegypti. The extracts were obtained by maceration from 5 g of latex powder concentrated separately in 100 mL of methanol, ethyl acetate, and hexane solvents. The concentrations of 100, 200, 300, 400, and 500 ppm of each extract were tested in triplicate with a solution of pyriproxyfen as the positive control and distilled water and dimethylsulfoxide as the negative control. The phytochemical prospection of the methanolic extract showed the presence of phenolic compounds, such as anthocyanins, anthocyanidins, catechins, chalcones, aurones, leucoanthocyanidins, and condensed tannins. The insecticidal bioactivity was most significant for the methanolic extract. The methanolic extract lethal concentrations (LC) of 50 and 90% were 190.76 and 464.74 ppm, respectively. After 48 hours of exposure, the extracts using methanol, ethyl acetate, and hexane at their highest concentrations (500 ppm) caused larval mortality of 100, 73.33, and 66.67%, respectively. These extracts also promoted changes in the external morphology of the larvae, such as damage to the anal papillae, darkening of the body, and reduction in the number of bristles. The methanolic extract showed greater expressivity for morphological changes. The latex of H. drasticus has larvicidal activity against third-stade larvae of A. aegypti and it is more significant when obtained through maceration in methanol. The methanolic extract of H. drasticus latex contains phenolic compounds with insecticidal activity against A. aegypti larvae

Euler configurations and quasi-polynomial systems

In the Newtonian 3-body problem, for any choice of the three masses, there are exactly three Euler configurations (also known as the three Euler points). In Helmholtz' problem of 3 point vortices in the plane, there are at most three collinear relative equilibria. The "at most three" part is common to both statements, but the respective arguments for it are usually so different that one could think of a casual coincidence. By proving a statement on a quasi-polynomial system, we show that the "at most three" holds in a general context which includes both cases. We indicate some hard conjectures about the configurations of relative equilibrium and suggest they could be attacked within the quasi-polynomial framework.Comment: 21 pages, 6 figure

Family-based analyses reveal novel genetic overlap between cytokine interleukin-8 and risk for suicide attempt

Background: Suicide is major public health concern. It is imperative to find robust biomarkers so that at-risk individuals can be identified in a timely and reliable manner. Previous work suggests mechanistic links between increased cytokines and risk for suicide, but questions remain regarding the etiology of this association, as well as the roles of sex and BMI. Methods: Analyses were conducted using a randomly-ascertained extended-pedigree sample of 1882 Mexican-American individuals (60% female, mean age = 42.04, range = 18-97). Genetic correlations were calculated using a variance components approach between the cytokines TNF-α, IL-6 and IL-8, and Lifetime Suicide Attempt and Current Suicidal Ideation. The potentially confounding effects of sex and BMI were considered. Results: 159 individuals endorse a Lifetime Suicide Attempt. IL-8 and IL-6 shared significant genetic overlap with risk for suicide attempt (ρg = 0.49, pFDR = 7.67 × 10-03; ρg = 0.53, pFDR = 0.01), but for IL-6 this was attenuated when BMI was included as a covariate (ρg = 0.37, se = 0.23, pFDR = 0.12). Suicide attempts were significantly more common in females (pFDR = 0.01) and the genetic overlap between IL-8 and risk for suicide attempt was significant in females (ρg = 0.56, pFDR = 0.01), but not in males (ρg = 0.44, pFDR = 0.30). Discussion: These results demonstrate that: IL-8 shares genetic influences with risk for suicide attempt; females drove this effect; and BMI should be considered when assessing the association between IL-6 and suicide. This finding represents a significant advancement in knowledge by demonstrating that cytokine alterations are not simply a secondary manifestation of suicidal behavior, but rather, the pathophysiology of suicide attempts is, at least partly, underpinned by the same biological mechanisms responsible for regulating inflammatory response

Sacrificial Adhesive Bonding: A Powerful Method For Fabrication Of Glass Microchips.

A new protocol for fabrication of glass microchips is addressed in this research paper. Initially, the method involves the use of an uncured SU-8 intermediate to seal two glass slides irreversibly as in conventional adhesive bonding-based approaches. Subsequently, an additional step removes the adhesive layer from the channels. This step relies on a selective development to remove the SU-8 only inside the microchannel, generating glass-like surface properties as demonstrated by specific tests. Named sacrificial adhesive layer (SAB), the protocol meets the requirements of an ideal microfabrication technique such as throughput, relatively low cost, feasibility for ultra large-scale integration (ULSI), and high adhesion strength, supporting pressures on the order of 5 MPa. Furthermore, SAB eliminates the use of high temperature, pressure, or potential, enabling the deposition of thin films for electrical or electrochemical experiments. Finally, the SAB protocol is an improvement on SU-8-based bondings described in the literature. Aspects such as substrate/resist adherence, formation of bubbles, and thermal stress were effectively solved by using simple and inexpensive alternatives.51327