Extraction of level density and gamma strength function from primary gamma spectra

We present a new iterative procedure to extract the level density and the gamma strength function from primary gamma spectra for energies close up to the neutron binding energy. The procedure is tested on simulated spectra and on data from the Yb-173(He-3,alpha)Yb-172 reaction.Comment: 23 pages including 1 table and 7 figure

Molecular imaging of extracellular vesicles in vitro via Raman metabolic labelling

Extracellular vesicles (EVs) are biologically-derived nanovectors important for intercellular communication and trafficking. As such, EVs show great promise as disease biomarkers and therapeutic drug delivery vehicles. However, despite the rapidly growing interest in EVs, understanding of the biological mechanisms that govern their biogenesis, secretion, and uptake remains poor. Advances in this field have been hampered by both the complex biological origins of EVs, which make them difficult to isolate and identify, and a lack of suitable imaging techniques to properly study their diverse biological roles. Here, we present a new strategy for simultaneous quantitative in vitro imaging and molecular characterisation of EVs in 2D and 3D based on Raman spectroscopy and metabolic labelling. Deuterium, in the form of deuterium oxide (D2O), deuterated choline chloride (d-Chol), or deuterated D-glucose (d-Gluc), is metabolically incorporated into EVs through the growth of parent cells on medium containing one of these compounds. Isolated EVs are thus labelled with deuterium, which acts as a bio-orthogonal Raman-active tag for direct Raman identification of EVs when introduced to unlabelled cell cultures. Metabolic deuterium incorporation demonstrates no apparent adverse effects on EV secretion, marker expression, morphology, or global composition, indicating its capacity for minimally obstructive EV labelling. As such, our metabolic labelling strategy could provide integral insights into EV biocomposition and trafficking. This approach has the potential to enable a deeper understanding of many of the biological mechanisms underpinning EVs, with profound implications for the design of EVs as therapeutic delivery vectors and applications as disease biomarkers

Observation of Thermodynamical Properties in the 162^{162}Dy, 166^{166}Er and 172^{172}Yb Nuclei

The density of accessible levels in the ($^3$He,$\alpha \gamma$) reaction has been extracted for the $^{162}$Dy, $^{166}$Er and $^{172}$Yb nuclei. The nuclear temperature is measured as a function of excitation energy in the region of 0 -- 6 MeV. The temperature curves reveal structures indicating new degrees of freedom. The heat capacity of the nuclear system is discussed within the framework of a canonical ensemble.Comment: 12 pages, 4 figures include

Seeing without Seeing? Degraded Conscious Vision in a Blindsight Patient

Blindsight patients, whose primary visual cortex is lesioned, exhibit preserved ability to discriminate visual stimuli presented in their “blind” field, yet report no visual awareness hereof. Blindsight is generally studied in experimental investigations of single patients, as very few patients have been given this “diagnosis”. In our single case study of patient GR, we ask whether blindsight is best described as unconscious vision, or rather as conscious, yet severely degraded vision. In experiment 1 and 2, we successfully replicate the typical findings of previous studies on blindsight. The third experiment, however, suggests that GR's ability to discriminate amongst visual stimuli does not reflect unconscious vision, but rather degraded, yet conscious vision. As our finding results from using a method for obtaining subjective reports that has not previously used in blindsight studies (but validated in studies of healthy subjects and other patients with brain injury), our results call for a reconsideration of blindsight, and, arguably also of many previous studies of unconscious perception in healthy subjects

Maternal age and risk of cesarean section in women with induced labor at term - a Nordic register-based study

Abstract Introduction Over the last decades, induction of labor has increased in many countries along with increasing maternal age. We assessed the effects of maternal age and labor induction on cesarean section at term among nulliparous and multiparous women without previous cesarean section. Material and methods We performed a retrospective national registry-based study from Denmark, Finland, Iceland, Norway and Sweden including 3 398 586 deliveries between 2000 and 2011. We investigated the impact of age on cesarean section among 196 220 nulliparous and 188 158 multiparous women whose labor was induced, had single cephalic presentation at term and no previous cesarean section. Confounders comprised country, time-period and gestational age. Results In nulliparous women with induced labor the rate of cesarean section increased from 14.0% in women less than 20 years of age to 39.9% in women 40 years and older. Compared to women aged 25-29 years, the corresponding relative risk were 0.60 (95% confidence interval (CI); 0.57 to 0.64) and 1.72 (95% CI; 1.66 to 1.79). In multiparous induced women the risk of cesarean section was 3.9% in women less than 20 years rising to 9.1% in women 40 years and older. Compared to women aged 25-29 years, the relative risk were 0.86 (95% CI; 0.54 to 1.37) and 1.98 (95% CI; 1.84 to 2.12), respectively. There were minimal confounding effects of country, time-period and gestational age on risk for cesarean section. Conclusions Advanced maternal age is associated with increased risk of cesarean section in women undergoing labor induction with a single cephalic presentation at term without a previous cesarean section. The absolute risk of cesarean section is 3-5 times higher across 5-year age groups in nulliparous relative to multiparous women having induced labor.Peer reviewe

Elevated maternal lipids in early pregnancy are not associated with risk of intrapartum caesarean in overweight and obese nulliparous women

Background: Maternal overweight and obesity are associated with slower labour progress and increased caesarean delivery for failure to progress. Obesity is also associated with hyperlipidaemia and cholesterol inhibits myometrial contractility in vitro. Our aim was, among overweight and obese nulliparous women, to investigate 1. the role of early pregnancy serum cholesterol and 2. clinical risk factors associated with first stage caesarean for failure to progress at term. Methods: Secondary data analysis from a prospective cohort of overweight/obese New Zealand and Australian nullipara recruited to the SCOPE study. Women who laboured at term and delivered vaginally (n=840) or required first stage caesarean for failure to progress (n=196) were included. Maternal characteristics and serum cholesterol at 14–16 weeks’ of gestation were compared according to delivery mode in univariable and multivariable analyses (adjusted for BMI, maternal age and height, obstetric care type, induction of labour and gestation at delivery ≥41 weeks). Results: Total cholesterol at 14–16 weeks was not higher among women requiring first stage caesarean for failure to progress compared to those with vaginal delivery (5.55 ± 0.92 versus 5.67 ± 0.85 mmol/L, p= 0.10 respectively). Antenatal risk factors for first stage caesarean for failure to progress in overweight and obese women were BMI (adjusted odds ratio [aOR (95% CI)] 1.15 (1.07-1.22) per 5 unit increase, maternal age 1.37 (1.17-1.61) per 5 year increase, height 1.09 (1.06-1.12) per 1cm reduction), induction of labour 1.94 (1.38-2.73) and prolonged pregnancy ≥41 weeks 1.64 (1.14-2.35). Conclusions: Elevated maternal cholesterol in early pregnancy is not a risk factor for first stage caesarean for failure to progress in overweight/obese women. Other clinically relevant risk factors identified are: increasing maternal BMI, increasing maternal age, induction of labour and prolonged pregnancy ≥41 weeks’ of gestation.Elaine M Fyfe, Karen S Rivers, John MD Thompson, Kamala PL Thiyagarajan, Katie M Groom, Gustaaf A Dekker, Lesley ME McCowan and On behalf of the SCOPE consortiu

Low-cost, versatile, and highly reproducible microfabrication pipeline to generate 3D-printed customised cell culture devices with complex designs

Cell culture devices, such as microwells and microfluidic chips, are designed to increase the complexity of cell-based models while retaining control over culture conditions and have become indispensable platforms for biological systems modelling. From microtopography, microwells, plating devices, and microfluidic systems to larger constructs such as live imaging chamber slides, a wide variety of culture devices with different geometries have become indispensable in biology laboratories. However, while their application in biological projects is increasing exponentially, due to a combination of the techniques, equipment and tools required for their manufacture, and the expertise necessary, biological and biomedical labs tend more often to rely on already made devices. Indeed, commercially developed devices are available for a variety of applications but are often costly and, importantly, lack the potential for customisation by each individual lab. The last point is quite crucial, as often experiments in wet labs are adapted to whichever design is already available rather than designing and fabricating custom systems that perfectly fit the biological question. This combination of factors still restricts widespread application of microfabricated custom devices in most biological wet labs. Capitalising on recent advances in bioengineering and microfabrication aimed at solving these issues, and taking advantage of low-cost, high-resolution desktop resin 3D printers combined with PDMS soft lithography, we have developed an optimised a low-cost and highly reproducible microfabrication pipeline. This is thought specifically for biomedical and biological wet labs with not prior experience in the field, which will enable them to generate a wide variety of customisable devices for cell culture and tissue engineering in an easy, fast reproducible way for a fraction of the cost of conventional microfabrication or commercial alternatives. This protocol is designed specifically to be a resource for biological labs with limited expertise in those techniques and enables the manufacture of complex devices across the μm to cm scale. We provide a ready-to-go pipeline for the efficient treatment of resin-based 3D-printed constructs for PDMS curing, using a combination of polymerisation steps, washes, and surface treatments. Together with the extensive characterisation of the fabrication pipeline, we show the utilisation of this system to a variety of applications and use cases relevant to biological experiments, ranging from micro topographies for cell alignments to complex multipart hydrogel culturing systems. This methodology can be easily adopted by any wet lab, irrespective of prior expertise or resource availability and will enable the wide adoption of tailored microfabricated devices across many fields of biology