On the thermal dynamic behaviour of the helium-cooled DEMO fusion reactor

The EU-DEMO conceptual design is being conducted among research institutions and universities from 26 countries of European Union, Switzerland and Ukraine. Its mission is to realise electricity from nuclear fusion reaction by 2050. As DEMO has been conceived to deliver net electricity to the grid, the choice of the Breeding Blanket (BB) coolant plays a pivotal role in the reactor design having a strong influence on plant operation, safety and maintenance. In particular, due to the pulsed nature of the heat source, the Primary Heat Transfer System (PHTS) becomes a very important actor of the Balance of Plant (BoP) together with the Power Conversion System (PCS). Moreover, aiming to mitigate the potential negative impact of plasma pulsing on BoP equipment, for the DEMO plant is also being investigated a "heat transfer chain" option which envisages an Intermediate Heat Transfer System (IHTS) equipped with an Energy Storage System (ESS) between PHTS and PCS. Within this framework, a preliminary study has been carried out to analyse the thermal dynamic behaviour of the IHTS system for the Helium-Cooled Pebble Bed (HCPB) BB concept during pulse/dwell transition which should be still considered as the normal operating mode of a fusion power plant. Starting from preliminary thermal-hydraulic calculations made in order to size the main BoP components, the global performances of DEMO BoP have been quantitatively assessed focusing the attention on the attitude of the whole IHTS to smooth the sudden power variations which come from the plasma. The paper describes criteria and rationale followed to develop a numerical model which manages to simulate simple transient scenarios of DEMO BoP. Results of numerical simulations are presented and critically discussed in order to point out the main issues that DEMO BoP has to overcome to achieve a viable electricity power output

Analysis of the effects of primary heat transfer system isolation valves in case of in-vessel loss-of-coolant accidents in the EU DEMO

As DEMO is the first European device planned to produce electricity from fusion, the volume of its Primary Heat Transfer Systems (PHTS) will be consistently larger if compared to present or next-generation tokamaks such as ITER. The consequences of an in-vessel Loss-Of-Coolant Accident (LOCA) would then be more important, and within the EUROfusion Consortium different possible mitigation measures are being investigated. Among these, the introduction of Isolation Valves (IsoVs) on the main cooling loops of the Breeding Blanket is being considered, in view of the many benefits they would introduce, not only in case of accidents, but also e.g. during the maintenance of the in-vessel components. Fast-closing IsoVs on the PHTS would help in relaxing not only the requirements of the VV pressure suppression system (VVPSS) design, but also those related to the expansion volumes that shall accommodate the contaminated coolant discharged from the PHTS after a LOCA. In the present work, the GETTHEM code, the system-level thermal-hydraulic model developed for the EU DEMO at Politecnico di Torino, is used to assess the beneficial effects of the introduction of the IsoVs. The effects of the actuation time of the IsoVs and of their location are parametrically investigated, considering both water and helium as PHTS coolants, with particular reference to the reduction of the in-vessel space-averaged pressure and of the suppression system size

Glassy magnetic behavior and correlation length in nanogranular Fe-oxide and Au/Fe-oxide samples

In nanoscale magnetic systems, the possible coexistence of structural disorder and competing magnetic interactionsmay determine the appearance of a glassy magnetic behavior, implying the onset of a low-temperature disordered collective state of frozen magnetic moments. This phenomenology is the object of an intense research activity, stimulated by a fundamental scientific interest and by the need to clarify how disordered magnetism effects may affect the performance of magnetic devices (e.g., sensors and data storage media). We report the results of a magnetic study that aims to broaden the basic knowledge of glassy magnetic systems and concerns the comparison between two samples, prepared by a polyol method. The first can be described as a nanogranular spinel Fe-oxide phase composed of ultrafine nanocrystallites (size of the order of 1 nm); in the second, the Fe-oxide phase incorporated non-magnetic Au nanoparticles (10-20 nm in size). In both samples, the Fe-oxide phase exhibits a glassy magnetic behavior and the nanocrystallite moments undergo a very similar freezing process. However, in the frozen regime, the Au/Fe-oxide composite sample is magnetically softer. This effect is explained by considering that the Au nanoparticles constitute physical constraints that limit the length of magnetic correlation between the frozen Fe-oxide moments

Biomedical Co-Cr-Mo Components Produced by Direct Metal Laser Sintering

Direct Metal Laser Sintering (DMLS) is an additive manufacturing technique based on a laser power source that sinters powdered materials using a 3D CAD model. The mechanical components produced by this procedure typically show higher residual porosity and poorer mechanical properties than those obtained by traditional manufacturing techniques. In this study, samples were produced by DMLS starting from a Co-Cr-Mo powder (in the \u3b3 phase) with a composition suitable for biomedical applications. Samples were submitted to hardness measurements and structural characterization. The samples showed a hardness value remarkably higher that those commonly obtained for the same cast or wrought alloys. In fact, the HRC value measured for the samples is 47 HRC, while the usual range for CAST Co-Cr-Mo is from 25 to 35 HRC. The samples microstructure was investigated by X-ray diffraction (XRD), electron microscopy (SEM and TEM) and energy dispersive microanalysis (EDX) in order to clarify the origin of this unexpected result. The laser treatment induced a melting of the metallic Co-Cr-Mo powder, generating a phase transformation from the \u3b3 (fcc) to the e (hcp) phase. The rapid cooling of the melted powder produced the formation of e (hcp) nano-lamellae inside the \u3b3 (fcc) phase. The nano-lamellae formed an intricate network responsible for the measured hardness increase. The results suggest possible innovative applications of the DMLS technique to the production of mechanical parts in the medical and dental fields, where a high degree of personalization is required

Impact of sarcopenia on outcomes after pancreatectomy for malignancy

Background: Sarcopenia, which is a subclinical loss of skeletal muscle mass as measured by cross-sectional imaging, is commonly observed in patients with malignancy. Few studies have examined the association between the presence of sarcopenia and outcome following surgery. The aim of this study is to evaluate the prevalence of sarcopenia and to investigate its impact on short- and long-term outcomes in patients who underwent pancreatectomy for malignancy. Materials and Methods: A retrospective review of a pancreatectomy database was performed. Skeletal muscle index (SMI) was measured on preoperative cross-sectional imaging in 144 patients undergoing pancreatectomy for cancer between 2007 and 2014. Sarcopenia was defined, according to the international consensus, as an SMI <52.4 cm2 /m2 and <38.9 cm2 /m2 for men and women respectively. The prevalence and impact of sarcopenia on morbidity, mortality, disease-free and overall survivals was assessed relative to other clinicopathological factors. Results: Mean age was 67.15 years and 51% was female. Pancreatic adenocarcinoma represents 66.7% of all cases. Pancreaticoduodenectomy was performed in 114 cases (79.2%). Margin status was R0 in 76.9%. Mean BMI was 24.85 Kg/m2 and mean SMI was 35,43 cm2 /m2 . One hundred and eight (74.5%) were sarcopenic, 37 (43.5%) were overweight/ obese and 43 (29.7%) were both (p = 0.041). Sarcopenia was significantly related to histology, sex, BMI and albumin. Overall morbidity and 90-days mortality were 50.7% and 9.1% respectively. The median follow up was 21 months. Overall and disease-free survival rate were 25,44 months and 11,84 months respectively. Sarcopenia was associated to a not statistically significant increased risk of overall morbidity, mortality and shorter disease- free and overall survivals after pancreatic surgery for cancer. Conclusions: Sarcopenia was found in 74.5% of cancer patients underwent pancreatectomy. It is an occult condition in overweight/obese patients but can be identified using CT scans. This condition, as defined by international consensus, is not associated with worse short-term and long-term outcomes after surgery

Microwave driven synthesis of narrow bandgap alpha-tin nanoparticles on silicon

This work proposes a microwave-based synthetic route for the preparation of tin nanospheres with a diamond-like a-phase structure on silicon. The main characteristics of the synthesized material are an extraordinarily narrow (around 50 meV) direct bandgap and an improved thermal stability (up to 200° C). Structural and compositional characterizations showed a core–shell structure comprised of an outer amorphous oxide shell and inner core containing a-phase tin domains. Microwaves turned out to be instrumental in achieving the specific nanostructures reported, due to their peculiar heating characteristics. Low pressure, low temperature and compatibility with integrated circuits manufacturing represent the most innovative features of the present synthetic process

Study of microstructure and magnetization reversal mechanism in granular CoCrPt:SiO2 films of variable thickness

n/

Status and challenges for the concept design development of the EU DEMO Plant Electrical System

The EU DEMO Plant Electrical System (PES) main scopes are to supply all the plant electrical loads and to deliver to the Power Transmission Grid (PTG) the net electrical power generated. The studies on the PES during the Pre-Concept Design (PCD) Phase were mainly addressed to understand the possible issues, related to the special features both of the power generated, with respect to a power plant of the same size, and of the power to be supplied to the electrical loads. For this purpose, the approach was to start the design of the different PES components adopting technologies already utilized in fusion experiments and in Nuclear Power Plants (NPP) to verify their applicability and identify possible limits when scaled to the DEMO size and applied to the specific pulsed operating conditions. This work is not completed, however several issues have been already identified related to the pulsed operation of the turbine generator, the large amount of recirculation power, the very high peaks of active power required for the plasma formation and control, the huge reactive power demand, if thyristor converter technology was adopted to supply the superconducting coils, etc.. The paper gives an overview on the features and scope of the PES and its subsystems, on the main achievements during the Pre-Concept Design (PCD) Phase, on the challenges for the development of the conceptual design in the next framework program and on the plan to face them