Inflammatory Cytokine Expression Is Associated with Chikungunya Virus Resolution and Symptom Severity

The Chikungunya virus infection zones have now quickly spread from Africa to parts of Asia, North America and Europe. Originally thought to trigger a disease of only mild symptoms, recently Chikungunya virus caused large-scale fatalities and widespread economic loss that was linked to recent virus genetic mutation and evolution. Due to the paucity of information on Chikungunya immunological progression, we investigated the serum levels of 13 cytokines/chemokines during the acute phase of Chikungunya disease and 6- and 12-month post-infection follow-up from patients of the Italian outbreak. We found that CXCL9/MIG, CCL2/MCP-1, IL-6 and CXCL10/IP-10 were significantly raised in the acute phase compared to follow-up samples. Furthermore, IL-1β, TNF-α, Il-12, IL-10, IFN-γ and IL-5 had low initial acute phase levels that significantly increased at later time points. Analysis of symptom severity showed association with CXCL9/MIG, CXCL10/IP-10 and IgG levels. These data give insight into Chikungunya disease establishment and subsequent convalescence, which is imperative to the treatment and containment of this quickly evolving and frequently re-emerging disease

Ertüchtigung der Flachschleifmaschine ELB SF 30

Aufbauend auf dem Praktikumsbericht wird in der vorliegenden Bachelorarbeit, das Thema „Ertüchtigung der Flachschleifmaschine ELB“ weiter behandelt. Es wird dabei speziell die Einführung eines neuen Bedienpanels an der Maschine konkretisiert. Zu Beginn erfolgt die Auswahl eines geeigneten Panels, welches zu der vorhandenen Steuerung kompatibel ist. Daraufhin folgt die Vorstellung der Visualisierungssoftware, sowie der Software zum Testen der projektierten Oberfläche des Bediengerätes. Im weiteren Verlauf finden sich Erläuterungen zur Programmierung des Panels, bezogen auf das ELB-Projekt wieder. Das letzte Kapitel bezieht sich auf die konkrete SPS-Lösung zwei ausgewählter Steuerungsfunktionen, zum einen die Magnetsteuerung und zum anderen die Querantriebsteuerung

0D Modelling: a Promising Means for After-treatment Issues in Modern Automotive Applications

For modern automotive applications, after-treatment systems have become essential to respect the new emission standards. All the automotive world's attention is focused on catalysis systems because they seem to be one of the best ways to reach the future standards. As a result, after-treatment issues are more and more significant in the cost of the whole engine and vehicle development process. For example, the Euro 6 Diesel after-treatment line might for some applications be composed of nothing less than five distinct after-treatment bricks. This complex architecture implies developing advanced tools to help the exhaust line conception and also the design of associated control strategies. The present paper demonstrates that zero-dimensional (0D) simulation can be a relevant approach to develop exhaust line simulators compatible with accuracy and CPU time required performances. This paper proposes an original zero-dimensional model of the monolith. This approach is based on resistive and capacitive elements according to the bond graph theory [Karnopp D.C., Margolis D.L., Rosenberg R.C. (1990) Systems dynamics: a unified approach, Second Edition, John Wiley & Sons, New-York]. The described dynamic model takes into account the pneumatic flow and the thermal behaviour of the monolith. Models of several catalysts are built by plugging this monolith model with some well-known simplified chemical reaction schemes [Koltsakis G.C., Konstandinis P.A., Stamatelos A.M. (1997) Development and application range of mathematical models for 3-way catalytic converters, Appl. Catal. B: Environ. 12, 161-191]. Splitting a monolith model into several elementary zero-dimensional blocks in series allows having a good representation of the specific internal dynamic of one catalyst and to access some local information as in conventional well-known one-dimensional models with low CPU time cost [Koltsakis G.C., Konstandinis P.A., Stamatelos A.M. (1997) Development and application range of mathematical models for 3-way catalytic converters, Appl. Catal. B: Environ. 12, 161-191]. Such an approach can be used as a way to get a phenomenological understanding of the catalytic system, which is known to be a very complex multi-physical system. It also represents a relevant simulation tool for the definition of after-treatment line architecture and pollutant emission control. The approach's potential to deal with all modern after-treatment bodies is illustrated by results for a Three-Way Catalyst (3WC), a Diesel Oxidation Catalyst (DOC), a Lean NOx Trap (LNT) system, a Selective Catalyst Reduction of NOx (SCR) system and a Diesel Particulate Filter (DPF). This ability to give, with a good compromise between accuracy/low CPU time cost, some interesting information to help the development of more and more complex exhaust system makes zero-dimensional simulation relevant

Simulation Support for Control Issues in the Context of Modern Diesel Air Path Systems

It is now obvious that the air path system will have to increase its performance to manage the in-cylinder conditions required by the combustion process if significant raw emission reduction is expected in Diesel engine applications. This crucial issue means air path evolutions with complex systems including advanced technologies such as Variable Valve Actuation (VVA) or two-stage turbocharging, and engine control capability improvement to optimise accurately the engine behaviour under transient conditions. At this stage of complexity, the engine controllability becomes a first-order factor to be taken into account in the technological orientations. Thanks to a high versatility of engine architecture, good physical trend capabilities and easy coupling with engine control, 0D simulation offers a very interesting support to help such investigations and discriminate the best Diesel air path system solutions. This paper describes how simulation is becoming a key tool to develop the control for various Diesel air path systems before having the corresponding experimental bench available, in order to anticipate the hard issues and begin to assess the controllability of each air path technology at the early stages of the engine development process

The effectiveness of different rat IgG subclasses as IgE-blocking antibodies in the Rat Basophil Leukemia cell model

The degranulation of mast cells in an allergic response is initiated by the aggregation of high-affinity IgE receptors (Fc epsilon RI) by IgE and antigen. Recently it has been shown that such degranulation can be inhibited by cross-linking FceRI and low-affinity IgG receptors (Fc gamma RII) which are also expressed by mast cells. The ability of various monoclonal antibodies to block the degranulation of rat basophil leukaemia (RBL) cells sensitized with IgE antidinitrophenyl (DNP) antibodies has been investigated. Sensitized cells were challenged with immune complexes formed using varying concentrations of antigen, and of both high- and low-valency antigen. It is reported here that rat IgG1 antibodies, which are associated in the rat with a Th1-type response, act as highly effective blocking antibodies over a wide concentration range. Rat IgG2a antibodies, which are associated with a Th2-type response, were able only to inhibit degranulation when immune complexes were formed with very low concentrations of high-valency antigen (DNP32-HSA). Under these conditions, some inhibitory activity was seen with high-affinity murine IgA anti-DNP but not with low-affinity rat IgG2b anti-DNP antibody-containing immune complexes. In addition to this inhibitory activity, IgG2a antibodies were shown to be capable of inducing degranulation of cells via unoccupied FceRI. These results demonstrate that blocking activity may arise via both inhibitory receptors and by masking of antigen

The Src family kinase, Lyn, suppresses osteoclastogenesis in vitro and in vivo

c-Src kinase is a rate-limiting activator of osteoclast (OC) function and Src inhibitors are therefore candidate antiosteoporosis drugs. By affecting αvβ3 and macrophage-colony stimulating factor (M-CSF)-induced signaling, c-Src is central to osteoclast activity, but not differentiation. We find Lyn, another member of Src family kinases (SFK) is, in contrast, a negative regulator of osteoclastic bone resorption. The absence of Lyn enhances receptor activator of NF-κB ligand (RANKL)-mediated differentiation of osteoclast precursors without affecting proliferation and survival, while its overexpression decreases osteoclast formation. In further contrast to c-Src, Lyn deficiency does not impact the activity of the mature cell. Reflecting increased osteoclast development in vitro, Lyn−/− mice undergo accelerated osteoclastogenesis and bone loss, in vivo, in response to RANKL. Mechanistically, Lyn forms a complex with receptor activator of NF-κB (RANK), the tyrosine phosphatase, SHP-1, and the adapter protein, Grb2-associated binder 2 (Gab2). Upon RANKL exposure, Gab2 phosphorylation, JNK, and NF-κB activation are enhanced in Lyn−/− osteoclasts, all critical events in osteoclast development. We therefore establish that Lyn regulates osteoclast formation and does it in a manner antithetical to that of c-Src. The most pragmatic aspect of our findings is that successful therapeutic inhibition of c-Src, in the context of the osteoclast, will require its stringent targeting

Tratamento cirúrgico da ginecomastia com pedículos lateral e medial

Ginecomastia é o aumento da mama masculina que pode acometer até 65% dos indivíduos deste sexo na fase infanto-puberal, compreendida entre 13 e 16 anos. Tem como principais causas hepatite ou cirrose hepática, carcinoma ou doenças inflamatórias pulmonares crônicas, carcinomas ou disfunções testiculares, tumores glandulares (pituitária, supra-renal), alterações dos níveis séricos de testosterona, síndromes genéticas (síndrome de Klinefelter, p.ex.), uso de drogas como heroína, maconha ou anabolizantes e hanseníase. Podemos classificar a ginecomastia quanto ao volume, quanto aos tecidos que a compõem (gordurosa ou pseudoginecomastia, glandular e mista), ou quanto ao tratamento necessário para sua correção cirúrgica (pequena, moderada e grave). O tratamento das formas mais graves de ginecomastia é muito diferente daquele aplicado às formas mais suaves, pois nas formas graves, além da ressecção dos tecidos gorduroso e glandular, existe a necessidade de ressecção da pele em excesso e o reposicionamento do complexo aréolo-mamilar. O objetivo deste trabalho é descrever uma técnica cirúrgica específica para estes pacientes portadores de formas graves de ginecomastia, através de dois pedículos dermogordurosos, um lateral e um medial, com aproximadamente 2cm de espessura, mantendo assim a nutrição do complexo aréolo-mamilar. Esses pedículos são delimitados entre as bissetrizes dos quadrantes súpero-lateral e ínfero-lateral, e súpero-medial e ínfero-medial, tendo o mamilo como vértice. Na área de pele excessiva periareolar, obtida através do pinçamento interdigital, é realizada a desepidermização dos pedículos lateral e medial e ressecção de toda pele e tecido celular subcutâneo até a fáscia peitoral nas regiões superior e inferior aos pedículos; a síntese é realizada em dois planos, sendo periareolar a cicatriz resultante. Foram operados com esta técnica vinte pacientes com forma grave de ginecomastia, com média etária de 23,3 anos; sendo seis pacientes da raça negra. O bom posicionamento do complexo aréolo-mamilar e uma cicatriz periareolar resultante, bem como a retirada de conteúdo suficiente, foram as principais vantagens observadas. Como complicações, tivemos assimetria das placas aréolo-mamilares em dois casos, nos quais havia acentuada diferença entre os dois lados na avaliação pré-operatória; cicatrização hipertrófica em um paciente da raça negra, cuja cicatriz foi atenuada com injeções intracicatriciais de triancinolona; necrose parcial de aréola em um caso, cuja ferida cicatrizou por segunda intenção, dispensando qualquer tratamento local posterior; deiscência de sutura periareolar em um caso, no qual foi feita a ressutura, com bom resultado, e quatro pacientes apresentaram coleção sero-hemática subcutânea, que foram drenadas e não apresentaram recidiva