87 research outputs found
Effect of temperature and illumination on the electrical characteristics of polymer-fullerene bulk-heterojunction solar cells
The current-voltage characteristics of ITO/PEDOT:PSS/OC1C10-PPV:PCBM/Al solar cells were measured in the temperature range 125-320 K under variable illumination, between 0.03 and 100 mW cm(-2) (white light), with the aim of determining the efficiency-limiting mechanism(s) in these devices, and the temperature and/or illumination range(s) in which these devices demonstrate optimal performance. (ITO: indium tin oxide; PEDOT:PSS: poly(styrene sulfonate)-doped poly(ethylene dioxythiophene); OC1C10-PPV: poly[2-methoxy-5-(3,7-dimethyl octyloxy)-1,4-phenylene vinylene]; PCBM: phenyl-C-61 butyric acid methyl ester.) The short-circuit current density and the fill factor grow monotonically with temperature until 320 K. This is indicative of a thermally activated transport of photogenerated charge carriers, influenced by recombination with shallow traps. A gradual increase of the open-circuit voltage to 0.91 V was observed upon cooling the devices down to 125 K. This fits the picture in which the open-circuit voltage is not limited by the work-function difference of electrode materials used. The overall effect of temperature on solar-cell parameters results in a positive temperature coefficient of the power conversion efficiency, which is 1.9% at T = 320 K and 100 mW cm(-2) (2.5% at 0.7 mW cm(-2)). The almost-linear variation of the short-circuit current density with light intensity confirms that the internal recombination losses are predominantly of monomolecular type under short-circuit conditions. We present evidence that the efficiency of this type of solar cell is limited by a light-dependent shunt resistance. Furthermore, the electronic transport properties of the absorber materials, e.g., low effective charge-carrier mobility with a strong temperature dependence, limit the photogenerated current due to a high series resistance, therefore the active layer thickness must be kept low, which results in low absorption for this particular composite absorber
Charge dissociation in polymer:fullerene bulk heterojunction solar cells with enhanced permittivity
Fingerprints for Structural Defects in Poly(thienylene vinylene) (PTV): A Joint Theoretical–Experimental NMR Study on Model Molecules
In the field of plastic electronics, low band gap conjugated polymers like poly(thienylene vinylene) (PTV) and its derivatives are a promising class of materials that can be obtained with high molecular weight via the so-called dithiocarbamate precursor route. We have performed a joint experimental- theoretical study of the full NMR chemical shift assignment in a series of thiophene-based model compounds, which aims at (i) benchmarking the quantum-chemical calculations against experiments, (ii) identifying the signature of possible structural defects that can appear during the polymerization of PTV's, namely head-to-head and tail-to-tail defects, and (iii) defining a criterion regarding regioregularity
Synthesis and properties of poly(p-phenylene vinylene) derivatives with hyperbranched structure and containing a nitro substituent
Synthesis of poly(p-phenylene vinylene) and derivatives via a new precursor route, the dithiocarbamate route
Poly(p-phenylene vinylene) derivatives with ester- and carboxy-functionalized substituents: a versatile platform towards polar functionalized conjugated polymers
Aging of a donor conjugated polymer: Photochemical studies of the degradation of poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4- phenylenevinylene]
International audienceThis article is devoted to the study of the photoaging and thermal aging of poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV; also called OC1C10-PPV) used in organic solar cells. Thin MDMO-PPV films (thickness 300 nm) in the presence of air or thermooxidized at 60°C. The modifications of the chemical structure of the matrix were analyzed with ultraviolet-visible and infrared spectroscopy. The oxidation products that formed were identified by postirradiation treatments, including chemical derivatization reactions. On the basis of the identification of the various products formed, a two-step radical mechanism is proposed to account for the modification of the chemical structure of the polymeric matrix. It involves first the oxidation of the ether substituent followed by the oxidation of the double bonds. These reactions are responsible for a loss of conjugation of MDMO-PPV, chain scissions, and a decrease in the visible absorbance, which are anticipated to drastically impair the photovoltaic properties of the material
- …