Adoption of Waste Heat Recovery Technologies: Reviewing the Relevant Barriers and Recommendations on How to Overcome Them

Data Availability: All data generated or analyzed during this study are included in this published article.Copyright © The Author(s) 2022. The wide adoption of heat recovery technologies in industry is hampered by specific “barriers” related to both technical and non-technical issues. This paper attempts to determine these barriers and make recommendations on how to address them. First, a literature review of related material is presented. Among numerous barriers, the main ones identified are (i) lack of information, (ii) lack of technology knowledge, (iii) technology risks, (iv) high initial and running and maintenance costs, (v) lack of financial support and lack of governmental incentives, (vi) size and available space limitations, (vii) lack of available infrastructure, (viii) production constraints and risk of production disruptions, (x) risk of the system negative impact on the company operations, and (xi) policy and regulations restrictions. Then, based on the above, a structured questionnaire on barriers to the adoption of waste heat recovery (WHR) technologies was prepared and issued to a number of industries throughout the European Union. Upon analyzing the questionnaire, an assessment of the importance and negative impact of each of the above-mentioned barriers is made. Subsequently, strategies and recommendations on how to overcome the barriers is reported. These recommendations are hoped to be adopted as far as possible in the packaging, installation, commissioning, and demonstration of new and old WHR technologies.European Union’s Horizon 2020 research and innovation program under Grant agreement No. 680599

Waste Heat Recovery Technologies Revisited with Emphasis on New Solutions, including Heat Pipes, and Case Studies

Copyright: © 2022 by the authors. Industrial processes are characterized by energy losses, such as heat streams rejected to the environment in the form of exhaust gases or effluents occurring at different temperature levels. Hence, waste heat recovery (WHR) has been a challenge for industries, as it can lead to energy savings, higher energy efficiency, and sustainability. As a consequence, WHR methods and technologies have been used extensively in the European Union (EU) (and worldwide for that matter). The current paper revisits and reviews conventional WHR technologies, their use in all types of industry, and their limitations. Special attention is given to alternative “new” technologies, which are discussed for parameters such as projected energy and cost savings. Finally, an extended review of case studies regarding applications of WHR technologies is presented. The information presented here can also be used to determine target energy performance, as well as capital and installation costs, for increasing the attractiveness of WHR technologies, leading to the widespread adoption by industry.European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 680599

Practicing convict criminology: lessons learned from British academic activism

Joanne Belknap’s recent ASC presidential address included a critique of Convict Criminology’s activism. A number of concerns were provided, although of particular importance here are, first, Belknap’s concerns regarding the absence of ‘marginalized voices’ in the Convict Criminology network. Second, the issue of defining how non-con academics function as Convict Criminology group members. This paper responds to these criticisms. Specifically, we discuss the question of ‘representation’ in BCC and our attempts to remedy this issue. We also draw attention to the academic activism that British Convict Criminology is conducting in Europe. This includes a detailed discussion of the collaborative research-activist activities that involve non-con as well as ex-con academic network members. We demonstrate how these collaborations explain the vital group membership role that non-con academics assume in the activism of Convict Criminology

GM and KM immunoglobulin allotypes in the Galician population: new insights into the peopling of the Iberian Peninsula

<p>Abstract</p> <p>Background</p> <p>The current genetic structure of Iberian populations has presumably been affected by the complex orography of its territory, the different people and civilizations that settled there, its ancient and complex history, the diverse and persistent sociocultural patterns in its different regions, and also by the effects of the Iberian Peninsula representing a refugium area after the last glacial maximum. This paper presents the first data on <it>GM </it>and <it>KM </it>immunoglobulin allotypes in the Galician population and, thus, provides further insights into the extent of genetic diversity in populations settled in the geographic extremes of the Cantabrian region of northern Spain. Furthermore, the genetic relationships of Galicians with other European populations have been investigated.</p> <p>Results</p> <p>Galician population shows a genetic profile for <it>GM </it>haplotypes that is defined by the high presence of the European Mediterranean <it>GM</it>*<it>3 23 5* </it>haplotype, and the relatively high incidence of the African marker <it>GM*1,17 23' 5*</it>. Data based on comparisons between Galician and other Spanish populations (mainly from the north of the peninsula) reveal a poor correlation between geographic and genetic distances (<it>r </it>= 0.30, <it>P </it>= 0.105), a noticeable but variable genetic distances between Galician and Basque subpopulations, and a rather close genetic affinity between Galicia and Valencia, populations which are geographically separated by a long distance and have quite dissimilar cultures and histories. Interestingly, Galicia occupies a central position in the European genetic map, despite being geographically placed at one extreme of the European continent, while displaying a close genetic proximity to Portugal, a finding that is consistent with their shared histories over centuries.</p> <p>Conclusion</p> <p>These findings suggest that the population of Galicia is the result of a relatively balanced mixture of European populations or of the ancestral populations that gave rise to them. This would support the importance of the migratory movements that have taken place in Europe over the course of recent human history and their effects on the European genetic landscape.</p

Observation of flow angle and flow magnitude fluctuations in Pb-Pb collisions at sNN=5.02TeV at the CERN Large Hadron Collider

This Letter reports on the first measurements of transverse momentum dependent flow angle n and flow magnitude vn fluctuations determined using new four-particle correlators. The measurements are performed for various centralities in Pb–Pb collisions at a center-of-mass energy per nucleon pair of √s NN = 5.02 TeV with ALICE at the CERN Large Hadron Collider. Both flow angle and flow magnitude fluctuations are observed in the presented centrality ranges and are strongest in the most central collisions and for a transverse momentum pT > 2 GeV/c. Comparison with theoretical models, including iEBE-VISHNU, MUSIC, and AMPT, show that the measurements exhibit unique sensitivities to the initial state of heavy-ion collisions

f0(980) production in inelastic pp collisions at s = 5.02 TeV

The measurement of the production of f0(980) in inelastic pp collisions at sqrt(s) = 5.02 TeV is presented. This is the first reported measurement of inclusive f0(980) yield at LHC energies. The production is measured at midrapidity, |y| pi+pi- hadronic decay channel using the ALICE detector. The pT-differential yields are compared to those of pions, protons and ϕ mesons as well as to predictions from the HERWIG 7.2 QCD-inspired Monte Carlo event generator and calculations from a coalescence model that uses the AMPT model as an input. The ratio of the pT-integrated yield of f0(980) relative to pions is compared to measurements in e+e- and pp collisions at lower energies and predictions from statistical hadronisation models and HERWIG 7.2. A mild collision energy dependence of the f0(980) to pion production is observed in pp collisions from SPS to LHC energies. All considered models underpredict the pT-integrated 2f0(980)/(pi+ + pi-) ratio. The prediction from the canonical statistical hadronisation model assuming a zero total strangeness content of f0(980) is consistent with the data within 1.9σ and is the closest to the data. The results provide an essential reference for future measurements of the particle yield and nuclear modification in p–Pb and Pb–Pb collisions, which have been proposed to be instrumental to probe the elusive nature and quark composition of the f0(980) scalar meson

Measurement of the non-prompt D-meson fraction as a function of multiplicity in proton-proton collisions at s \sqrt{s} = 13 TeV

The fractions of non-prompt (i.e. originating from beauty-hadron decays) D0 and D+ mesons with respect to the inclusive yield are measured as a function of the charged-particle multiplicity in proton-proton collisions at a centre-of-mass energy of √s = 13 TeV with the ALICE detector at the LHC. The results are reported in intervals of transverse momentum (pT) and integrated in the range 1 < pT < 24 GeV/c. The fraction of non-prompt D0 and D+ mesons is found to increase slightly as a function of pT in all the measured multiplicity intervals, while no significant dependence on the charged- particle multiplicity is observed. In order to investigate the production and hadronisation mechanisms of charm and beauty quarks, the results are compared to PYTHIA 8 as well as EPOS 3 and EPOS 4 Monte Carlo simulations, and to calculations based on the colour glass condensate including three-pomeron fusion

Investigation of K+K- interactions via femtoscopy in Pb-Pb collisions at sNN =2.76 TeV at the CERN Large Hadron Collider

Femtoscopic correlations of nonidentical charged kaons (K+K-) are studied in Pb-Pb collisions at a center-of-mass energy per nucleon-nucleon collision sNN=2.76 TeV by ALICE at the CERN Large Hadron Collider. One-dimensional K+K- correlation functions are analyzed in three centrality classes and eight intervals of particle-pair transverse momentum. The Lednický and Luboshitz interaction model used in the K+K- analysis includes the final-state Coulomb interactions between kaons and the final-state interaction through a0(980) and f0(980) resonances. The mass of f0(980) and coupling were extracted from the fit to K+K- correlation functions using the femtoscopic technique. The measured mass and width of the f0(980) resonance are consistent with other published measurements. The height of the φ(1020) meson peak present in the K+K- correlation function rapidly decreases with increasing source radius, qualitatively in agreement with an inverse volume dependence. A phenomenological fit to this trend suggests that the φ(1020) meson yield is dominated by particles produced directly from the hadronization of the system. The small fraction subsequently produced by final-state interactions could not be precisely quantified with data presented in this paper and will be assessed in future work