105 research outputs found
High‐resolution rock magnetic cyclostratigraphy in an Eocene flysch, Spanish Pyrenees
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/95346/1/ggge1746.pd
The Cyclostratigraphy Intercomparison Project (CIP): consistency, merits and pitfalls
Cyclostratigraphy is an important tool for understanding astronomical climate forcing and reading geological time in sedimentary sequences, provided that an imprint of insolation variations caused by Earth’s orbital eccentricity, obliquity and/or precession is preserved (Milankovitch forcing). Numerous stratigraphic and paleoclimate studies have applied cyclostratigraphy, but the robustness of the methodology and its dependence on the investigator have not been systematically evaluated. We developed the Cyclostratigraphy Intercomparison Project (CIP) to assess the robustness of cyclostratigraphic methods using an experimental design of three artificial cyclostratigraphic case studies with known input parameters. Each case study is designed to address specific challenges that are relevant to cyclostratigraphy. Case 1 represents an offshore research vessel environment, as only a drill-core photo and the approximate position of a late Miocene stage boundary are available for analysis. In Case 2, the Pleistocene proxy record displays clear nonlinear cyclical patterns and the interpretation is complicated by the presence of a hiatus. Case 3 represents a Late Devonian proxy record with a low signal-to-noise ratio with no specific theoretical astronomical solution available for this age. Each case was analyzed by a test group of 17-20 participants, with varying experience levels, methodological preferences and dedicated analysis time. During the CIP 2018 meeting in Brussels, Belgium, the ensuing analyses and discussion demonstrated that most participants did not arrive at a perfect solution, which may be partly explained by the limited amount of time spent on the exercises (∼4.5 hours per case). However, in all three cases, the median solution of all submitted analyses accurately approached the correct result and several participants obtained the exact correct answers. Interestingly, systematically better performances were obtained for cases that represented the data type and stratigraphic age that were closest to the individual participants’ experience. This experiment demonstrates that cyclostratigraphy is a powerful tool for deciphering time in sedimentary successions and, importantly, that it is a trainable skill. Finally, we emphasize the importance of an integrated stratigraphic approach and provide flexible guidelines on what good practices in cyclostratigraphy should include. Our case studies provide valuable insight into current common practices in cyclostratigraphy, their potential merits and pitfalls. Our work does not provide a quantitative measure of reliability and uncertainty of cyclostratigraphy, but rather constitutes a starting point for further discussions on how to move the maturing field of cyclostratigraphy forward
Recommended from our members
The Cyclostratigraphy Intercomparison Project (CIP): consistency, merits and pitfalls
Cyclostratigraphy is an important tool for understanding astronomical climate forcing and reading geological time in sedimentary sequences, provided that an imprint of insolation variations caused by Earth’s orbital eccentricity, obliquity and/or precession is preserved (Milankovitch forcing). Numerous stratigraphic and paleoclimate studies have applied cyclostratigraphy, but the robustness of the methodology and its dependence on the investigator have not been systematically evaluated. We developed the Cyclostratigraphy Intercomparison Project (CIP) to assess the robustness of cyclostratigraphic methods using an experimental design of three artificial cyclostratigraphic case studies with known input parameters. Each case study is designed to address specific challenges that are relevant to cyclostratigraphy. Case 1 represents an offshore research vessel environment, as only a drill-core photo and the approximate position of a late Miocene stage boundary are available for analysis. In Case 2, the Pleistocene proxy record displays clear nonlinear cyclical patterns and the interpretation is complicated by the presence of a hiatus. Case 3 represents a Late Devonian proxy record with a low signal-to-noise ratio with no specific theoretical astronomical solution available for this age. Each case was analyzed by a test group of 17-20 participants, with varying experience levels, methodological preferences and dedicated analysis time. During the CIP 2018 meeting in Brussels, Belgium, the ensuing analyses and discussion demonstrated that most participants did not arrive at a perfect solution, which may be partly explained by the limited amount of time spent on the exercises (∼4.5 hours per case). However, in all three cases, the median solution of all submitted analyses accurately approached the correct result and several participants obtained the exact correct answers. Interestingly, systematically better performances were obtained for cases that represented the data type and stratigraphic age that were closest to the individual participants’ experience. This experiment demonstrates that cyclostratigraphy is a powerful tool for deciphering time in sedimentary successions and, importantly, that it is a trainable skill. Finally, we emphasize the importance of an integrated stratigraphic approach and provide flexible guidelines on what good practices in cyclostratigraphy should include. Our case studies provide valuable insight into current common practices in cyclostratigraphy, their potential merits and pitfalls. Our work does not provide a quantitative measure of reliability and uncertainty of cyclostratigraphy, but rather constitutes a starting point for further discussions on how to move the maturing field of cyclostratigraphy forward
Initial results of coring at Prees, Cheshire Basin, UK (ICDP JET project): Towards an integrated stratigraphy, timescale, and Earth system understanding for the Early Jurassic
Drilling for the International Continental Scientific Drilling Program (ICDP) Early Jurassic Earth System and Timescale project (JET) was undertaken between October 2020 and January 2021. The drill site is situated in a small-scale synformal basin of the latest Triassic to Early Jurassic age that formed above the major Permian-Triassic half-graben system of the Cheshire Basin. The borehole is located to recover an expanded and complete succession to complement the legacy core from the Llanbedr (Mochras Farm) borehole drilled through 1967-1969 on the edge of the Cardigan Bay Basin, North Wales. The overall aim of the project is to construct an astronomically calibrated integrated timescale for the Early Jurassic and to provide insights into the operation of the Early Jurassic Earth system. Core of Quaternary age cover and Early Jurassic mudstone was obtained from two shallow partially cored geotechnical holes (Prees 2A to 32.2g¯m below surface (mg¯b.s.) and Prees 2B to 37.0g¯mg¯b.s.) together with Early Jurassic and Late Triassic mudstone from the principal hole, Prees 2C, which was cored from 32.92 to 651.32g¯m (corrected core depth scale). Core recovery was 99.7g¯% for Prees 2C. The ages of the recovered stratigraphy range from the Late Triassic (probably Rhaetian) to the Early Jurassic, Early Pliensbachian (Ibex Ammonoid Chronozone). All ammonoid chronozones have been identified for the drilled Early Jurassic strata. The full lithological succession comprises the Branscombe Mudstone and Blue Anchor formations of the Mercia Mudstone Group, the Westbury and Lilstock formations of the Penarth Group, and the Redcar Mudstone Formation of the Lias Group. A distinct interval of siltstone is recognized within the Late Sinemurian of the Redcar Mudstone Formation, and the name "Prees Siltstone Member"is proposed. Depositional environments range from playa lake in the Late Triassic to distal offshore marine in the Early Jurassic. Initial datasets compiled from the core include radiography, natural gamma ray, density, magnetic susceptibility, and X-ray fluorescence (XRF). A full suite of downhole logs was also run. Intervals of organic carbon enrichment occur in the Rhaetian (Late Triassic) Westbury Formation and in the earliest Hettangian and earliest Pliensbachian strata of the Redcar Mudstone Formation, where up to 4g¯% total organic carbon (TOC) is recorded. Other parts of the succession are generally organic-lean, containing less than 1g¯% TOC. Carbon-isotope values from bulk organic matter have also been determined, initially at a resolution of g1/4g¯1g¯m, and these provide the basis for detailed correlation between the Prees 2 succession and adjacent boreholes and Global Stratotype Section and Point (GSSP) outcrops. Multiple complementary studies are currently underway and preliminary results promise an astronomically calibrated biostratigraphy, magnetostratigraphy, and chemostratigraphy for the combined Prees and Mochras successions as well as insights into the dynamics of background processes and major palaeo-environmental changes
Cyklostratygrafia utworów batonu na podstawie badań podatności magnetycznej -- wstępne wyniki
OESbathy version 1.0: a method for reconstructing ocean bathymetry with generalized continental shelf-slope-rise structures
We present a method for reconstructing global ocean bathymetry that combines
a standard plate cooling model for the oceanic lithosphere based on the age
of the oceanic crust, global oceanic sediment thicknesses, plus generalized
shelf-slope-rise structures calibrated at modern active and passive
continental margins. Our motivation is to develop a methodology for
reconstructing ocean bathymetry in the geologic past that includes
heterogeneous continental margins in addition to abyssal ocean floor. First,
the plate cooling model is applied to maps of ocean crustal age to calculate
depth to basement. To the depth to basement we add an isostatically
adjusted, multicomponent sediment layer constrained by sediment thickness
in the modern oceans and marginal seas. A three-parameter continental
shelf-slope-rise structure completes the bathymetry reconstruction,
extending from the ocean crust to the coastlines. Parameters of the
shelf-slope-rise structures at active and passive margins are determined
from modern ocean bathymetry at locations where a complete history of
seafloor spreading is preserved. This includes the coastal regions of the
North, South, and central Atlantic, the Southern Ocean between
Australia and Antarctica, and the Pacific Ocean off the west coast of South
America. The final products are global maps at 0.1° × 0.1° resolution of depth to basement, ocean bathymetry with an
isostatically adjusted multicomponent sediment layer, and ocean bathymetry
with reconstructed continental shelf-slope-rise structures. Our
reconstructed bathymetry agrees with the measured ETOPO1 bathymetry at most
passive margins, including the east coast of North America, north coast of
the Arabian Sea, and northeast and southeast coasts of South America. There
is disagreement at margins with anomalous continental shelf-slope-rise
structures, such as around the Arctic Ocean, the Falkland Islands, and
Indonesia
The Milankovitch interpretation of the Latemar platform cycles (Dolomites, Italy): implications for geochronology, biostratigraphy and Middle Triassic carbonate accumulation
A 160-m-long section measured in the lagoonal facies of the Middle Triassic Latemar platform (Dolomites, Italy) reveals a set
of frequency components that we interpret as a strong Milankovitch signal. In this interpretation, all principal frequencies associated with
the theoretical Middle Triassic precession index, P1 = 1/(21.7 ky), P2 = 1/(17.6 ky), and its modulations, E1 = 1/(400 ky), E2 = 1/(95 ky),
and E3 = 1/(125 ky), were detected in a time\u2013frequency evaluation of the cycles. A weak obliquity signal is also present in part of the section.
Thus, the Latemar cycles appear to have recorded the clearest orbital forcing signal yet found in a carbonate platform. This astronomical
calibration indicates that the section was deposited in ca. 3.1 My and therefore that the entire Latemar cyclic succession (~ 470 m) took at
least 9 My to form. However, the calibration also leads to serious conflicts with other interpreted geological data: U/Pb radiometric ages
of zircons collected from tuffites within the Latemar lagoon and in coeval basinal sediments point to a timescale that is five times shorter
than this astronomically calibrated estimate; similar discrepancies arise when the average duration of Triassic ammonoid biozones or the
sedimentation rates of coeval basinal series are considered. Nonetheless, all of the methods that have been used to estimate the time of
formation of the Latemar platform continue to have shortcomings, and the contradictions among these different geological calibrations
remain unresolved
Orbital calibration of the Early Kimmeridgian (southeastern France) : implications for geochronology and sequence stratigraphy
International audienc
A new tool in cyclostratigraphy: terrestrial laser scanner imaging reveals astronomical forcing in the Early Cretaceous of the Tethys realm
5nonenoneFranceschi M.; Preto N.; Hinnov L.A.; Huang C.; Rusciadelli G.Franceschi, M.; Preto, N.; Hinnov, L. A.; Huang, C.; Rusciadelli, G
- …