Inertial waves in rapidly rotating flows: a dynamical systems perspective

An overview of recent developments in a wide variety of enclosed rapidly rotating flows is presented. Highlighted is the interplay between inertial waves, which have been predicted from linear inviscid considerations, and the viscous boundary layer dynamics which result from instabilities as the nonlinearities in the systems are increased. Further, even in the absence of boundary layer instabilities, nonlinearity in the system often leads to complicated interior flows due to subcritical instabilities, Eckhaus bands and heteroclinic dynamics. The ensuing spatio-temporally complex dynamics is analysed in terms of equivariant dynamical systems, providing a general perspective for the wide range of dynamics involved.Postprint (author's final draft

Modelling hydrological connectivity in burned areas. A case study from South of Spain

Overland flow connectivity depends on the spatio-temporal interactions of hydrological and geomorphic processes as well as on the human footprint on the landscape. This study deals with the modelling of hydrological connectivity in a burned area with different levels of fire severity. Namely, the objectives are to: i) characterize and ii) modelling the pre- (PreF) and post-fire (PostF) scenarios, as well as iii) evaluate the effect of the vegetation changes due to the fire and the initial post-fire management practices (construction of new skid trails and check-dams) on the magnitude and spatial pattern of connectivity. Four post-fire scenarios are simulated: immediately after the fire (PostF1), with new skids and without check-dams (PostF2), with new skids and check-dams and without vegetation recovery (PostF3), and with new skids and check-dams and incipient vegetation cover (PostF4). The study area corresponds to eleven headwater sub-catchments (total area of 329 ha) that cover the entire burned area of the mountain in the West and Southwest facing hillslopes (ca. 200 ha). This site is located in the province of Malaga, South of Spain, and all sub-catchments are disconnected between them. The fire started in 2014, 27 June and lasted two days. The landscape is mainly mountainous, with very steep slopes and marble rocks, Mediterranean climate, and a land use of shrubs and pine forests (pre-fire scenario). Settlements appear at the bottom of the slopes. After the wildfire, land management were carried out in order to remove completely the burned trees and thus new skid trails were built. Then, eleven concrete check-dams and twelve wooded check-dams were built in the main gullies. The different scenarios of linear landscape elements, vegetation cover and modifications on the topography related to the construction of new trails and check-dams were included in the simulations. The IC index of hydrological connectivity was chosen to perform this metric at a spatial resolution of 5 x 5 meters. The analysis of the different spatial patterns and temporal changes was done considering the different levels of fire severity and changes on hydrological connectivity were also analysed at the outlet of each sub-catchment.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Small aspect ratio Taylor-Couette flow: onset of a very-low-frequency three-torus state

The nonlinear dynamics of Taylor-Couette flow in a small aspect ratio annulus (where the length of the cylinders is half of the annular gap between them) is investigated by numerically solving the full three-dimensional Navier-Stokes equations. The system is invariant to arbitrary rotations about the annulus axis and to a reflection about the annulus half-height, so that the symmetry group is SO(2)×Z2. In this paper, we systematically investigate primary and subsequent bifurcations of the basic state, concentrating on a parameter regime where the basic state becomes unstable via Hopf bifurcations. We derive the four distinct cases for the symmetries of the bifurcated orbit, and numerically find two of these. In the parameter regime considered, we also locate the codimension-two double Hopf bifurcation where these two Hopf bifurcations coincide. Secondary Hopf bifurcations (Neimark-Sacker bifurcations), leading to modulated rotating waves, are subsequently found and a saddle-node-infinite-period bifurcation between a stable (node) and an unstable (saddle) modulated rotating wave is located, which gives rise to a very-low-frequency three-torus. This paper provides the computed example of such a state, along with a comprehensive bifurcation sequence leading to its onset.Postprint (published version

Modeling the effect of the electrode potential in SERS by electronic structure calculations.

Surface Enhanced Raman Spectroscopy (SERS), due to the ability of greatly intensify the weak Raman signal of molecules adsorbed to metal surfaces, has proven to be a very useful tool to investigate changes in the electronic structure of metal-molecule surface complex. A deep knowledge of the electronic structure of these metal-molecule hybrid systems is key in electrochemistry, catalysis, plasmonics, molecular electronics, and in the development of selective and ultra-sensitive analytical sensors. The origin of this huge enhancement in SERS is due to two contributions: the electromagnetic (EM), related to surface plasmons, and the chemical mechanism, due to resonant charge transfer (CT) process between the adsorbate and the metal (CTSERS). Unfortunately, the SERS implies very complex phenomena where the molecule and the metal nanoparticle are involved. This fact makes challenging to build realistic theoretical models that take into account both the metal and the molecule at quantum level. We propose a methodology, based on DFT and ab initio electronic calculations, to simulate the effect of the electrode potential on the absorption, on the charge transfer states energies, and on the electronic excitations in metal-molecule hybrid systems from a microscopic point of view. This methodology consists on the prediction of Raman intensities from ab initio calculations of the geometries or the energy gradients at the excited states Franck-Condon point, bringing the possibility to predict the intensities in CTSERS as well as in resonance Raman without the need to know the excited state geometries, not always feasible to compute. The microscopic model adopted to mimic the effect of the interphase electric potential consist in a molecule adsorbed to a linear silver cluster [Agn-Adsorbate]q, were n is the number of silver atoms, and the total charge of the system (q) is zero for n=2 and q=±1 for n=1, 3 and 7.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Chiroptical Spectroscopy of C3 Molecules

The relevance of molecules with C3 symmetry comes from the fact of many of them, upon assembling as columnar helical macromolecules, are ideal platform for electro-optical devices, for example as liquid crystals. The properties of these devices are highly dependent of the structure of the bulk aggregates, and consequently they can be controlled by modifying the position and nature of the stereocenters in the molecular building blocks. In this work we present an electronic and vibrational chiroptical study on a series of star-shaped molecules based on the octopolar C3-symmetric 1,3,5-(phenylene-ethynylene)-benzene block.Universidad de Málaga, Campus de Excelencia Internacional Andalucía Tec

A note on the combustion of blends of diesel and soya, sunflower and rapeseed vegetable oils in a light boiler

Producción CientíficaThis paper deals with the study of the vegetable oils (VO) used as fuel for heating. The properties of sunflower, rape and soya oils are studied and these are compared with the properties of C-diesel fuel (used for heating domestic purposes in Spain). The mixtures of VO and diesel are studied and characterized and, finally, the results of a series of combustion trials of the mixtures in a conventional heating installation with a mechanical pulverization burner are presented. The results show that viscosity of VO limits the use of blends up to 40% of them, and the oxygen present in their structures contributes to an efficiency gai

Customer-oriented risk assessment in Network Utilities

For companies that distribute services such as telecommunications, water, energy, gas, etc., quality perceived by the customers has a strong impact on the fulfillment of financial goals, positively increasing the demand and negatively increasing the risk of customer churn (loss of customers). Failures by these companies may cause customer affection in a massive way, augmenting the intention to leave the company. Therefore, maintenance performance and specifically service reliability has a strong influence on financial goals. This paper proposes a methodology to evaluate the contribution of the maintenance department in economic terms, based on service unreliability by network failures. The developed methodology aims to provide an analysis of failures to facilitate decision making about maintenance (preventive/predictive and corrective) costs versus negative impacts in end-customer invoicing based on the probability of losing customers. Survival analysis of recurrent failures with the General Renewal Process distribution is used for this novel purpose with the intention to be applied as a standard procedure to calculate the expected maintenance financial impact, for a given period of time. Also, geographical areas of coverage are distinguished, enabling the comparison of different technical or management alternatives. Two case studies in a telecommunications services company are presented in order to illustrate the applicability of the methodology

Comparison of Gridded DEMs by Buffering

This research was partially funded by the research project "Functional Quality in Digital Elevation Models in Engineering" (https://coello.ujaen.es/investigacion/web_giic/funquality4 dem/, accessed on 28 July 2021) of the State Research Agency. PID2019-106195RB-I00/AEI/10.13039/ 501100011033.Comparing two digital elevation models (DEMs), S1 (reference) and S2 (product), in order to get the S2 quality, has usually been performed on sampled points. However, it seems more natural, as we propose, comparing both DEMs using 2.5D surfaces: applying a buffer to S1 (single buffer method, SBM) or to both S1 and S2 (double buffer method, DBM). The SBM and DBM approaches have been used in lines accuracy assessment and, in this paper, we generalize them to a DEM surface, so that more area of the S2 surface (in the case of the SBM), or the area and volume (in the case of the DBM) that are involved, more similarly are S1 and S2. The results obtained show that across both methods, SBM recognizes the presence of outliers and vertical bias while DBM allows a richer and more complex analysis based on voxel intersection. Both methods facilitate creating observed distribution functions that eliminate the need for the hypothesis of normality on discrepancies and allow the application of quality control techniques based on proportions. We consider that the SBM is more suitable when the S1 accuracy is much greater than that of S2 and DBM is preferred when the accuracy of S1 and S2 are approximately equal.research project "Functional Quality in Digital Elevation Models in Engineering" of the State Research Agency PID2019-106195RB-I00/AEI/10.13039/50110001103

Quality specification and control of a point cloud from a TLS survey using ISO 19157 standard

This paper presents an application of the ISO 19157 framework to the case of a point cloud (PC) representing a heritage asset whose purpose is to serve specific use cases that could be managed in a building information modeling (BIM) environment. The main contribution of this study is to clarify the relationships between the different parts of the ISO 19157 framework applied to heritage building information modeling (HBIM) products derived from terrestrial laser scanner (TLS) surveys by means of a running example. This paper presents a proposal to evaluate, control and report on the quality of the TLS survey of the Ariza Bridge (a 16th century construction). In order to achieve this objective the data quality specifications that must be met are defined by describing and identifying the requirements of five use cases of the data product: 3D visualization, location transfer, measurement, plane generation and absolute positioning. The specifications, according to ISO 19157, are formalized by selecting the data quality element to be measured, its scope, the measure used and the level of conformity necessary for the element to be accepted. In addition, the control methods for each quality element are proposed.Junta de Andalucia PAIDI-TEP-164Universidad de Jae?n POAIUJA 21-22 Universidad de Jaen / CBUA Universidad de Jaen PAIDI-TEP-164 POAIUJA 21-22 TEP164_202