9,127 research outputs found
General purpose airborne simulator - Conceptual design report
General purpose airborne simulator with capabilities for model controlled and response feedback types of variable stability operatio
Shuttle STS-2 mission communication systems RF coverage and performance predictions. Volume 1: Ascent
The RF communications capabilities and nominally expected performance for the ascent phase of the second orbital flight of the shuttle are provided. Predicted performance is given mainly in the form of plots of signal strength versus elapsed mission time for the STDN (downlink) and shuttle orbiter (uplink) receivers for the S-band PM and FM, and UHF systems. Performance of the NAV and landing RF systems is treated for RTLS abort, since in this case the spacecraft will loop around and return to the launch site. NAV and landing RF systems include TACAN, MSBLS, and C-band altimeter. Signal strength plots were produced by a computer program which combines the spacecraft trajectory, antenna patterns, transmit and receive performance characteristics, and system mathematical models. When available, measured spacecraft parameters were used in the predictions; otherwise, specified values were used. Specified ground station parameter values were also used. Thresholds and other criteria on the graphs are explained
Optimization of circular orifice jets mixing into a heated cross flow in a cylindrical duct
To examine the mixing characteristics of circular jets in an axisymmetric can geometry, temperature measurements were obtained downstream of a row of cold jet injected into a heated cross stream. The objective was to obtain uniform mixing within one duct radius downstream of the leading edge of the jet orifices. An area weighted standard deviation of the mixture fraction was used to help quantify the degree of mixedness at a given plane. Non-reacting experiments were conducted to determine the influence of the number of jets on the mixedness in a cylindrical configuration. Results show that the number of orifices significantly impacts the mixing characteristics of jets injected from round hole orifices in a can geometry. Optimum mixing occurs when the mean jet trajectory aligns with the radius which divides the cross sectional area of the can into two equal parts at one mixer radius downstream of the leading edge of the orifice. The optimum number of holes at momentum-flux ratios of 25 and 52 is 10 and 15 respectively
Isoprene photooxidation : new insights into the production of acids and organic nitrates
We describe a nearly explicit chemical mechanism for isoprene photooxidation guided by chamber studies that include time-resolved observation of an extensive suite of volatile compounds. We provide new constraints on the chemistry of the poorly-understood isoprene δ-hydroxy channels, which account for more than one third of the total isoprene carbon flux and a larger fraction of the nitrate yields. We show that the cis branch dominates the chemistry of the δ-hydroxy channel with less than 5% of the carbon following the trans branch. The modelled yield of isoprene nitrates is 12±3% with a large difference between the δ and β branches. The oxidation of these nitrates releases about 50% of the NOx. Methacrolein nitrates (modelled yield ≃15±3% from methacrolein) and methylvinylketone nitrates (modelled yield ≃11±3% yield from methylvinylketone) are also observed. Propanone nitrate, produced with a yield of 1% from isoprene, appears to be the longest-lived nitrate formed in the total oxidation of isoprene. We find a large molar yield of formic acid and suggest a novel mechanism leading to its formation from the organic nitrates. Finally, the most important features of this mechanism are summarized in a condensed scheme appropriate for use in global chemical transport models
Recommended from our members
Thermal stress-induced charge and structure heterogeneity in emerging cathode materials
Nickel-rich layered oxide cathode materials are attractive near-term candidates for boosting the energy density of next generation lithium-ion batteries. The practical implementation of these materials is, however, hindered by unsatisfactory capacity retention, poor thermal stability, and oxygen release as a consequence of structural decomposition, which may have serious safety consequences. The undesired side reactions are often exothermic, causing complicated electro-chemo-mechanical interplay at elevated temperatures. In this work, we explore the effects of thermal exposure on chemically delithiated LiNi0.8Mn0.1Co0.1O2 (NMC-811) at a practical state-of-charge (50% Li content) and an over-charged state (25% Li content). A systematic study using a suite of advanced synchrotron radiation characterization tools reveals the dynamics of thermal behavior of the charged NMC-811, which involves sophisticated structural and chemical evolution; e.g. lattice phase transformation, transition metal (TM) cation migration and valence change, and lithium redistribution. These intertwined processes exhibit a complex 3D spatial heterogeneity and, collectively, form a valence state gradient throughout the particles. Our study sheds light on the response of NMC-811 to elevated temperature and highlights the importance of the cathode's thermal robustness for battery performance and safety
Global modeling of secondary organic aerosol formation from aromatic hydrocarbons: high- vs low-yield pathways
Formation of SOA from the aromatic species toluene, xylene, and, for the first time, benzene, is added to a global chemical transport model. A simple mechanism is presented that accounts for competition between low and high-yield pathways of SOA formation, wherein secondary gas-phase products react further with either nitrogen oxide (NO) or hydroperoxy radical (HO2) to yield semi- or non-volatile products, respectively. Aromatic species yield more SOA when they react with OH in regions where the [NO]/[HO2] ratios are lower. The SOA yield thus depends upon the distribution of aromatic emissions, with biomass burning emissions being in areas with lower [NO]/[HO2] ratios, and the reactivity of the aromatic with respect to OH, as a lower initial reactivity allows transport away from industrial source regions, where [NO]/[HO2] ratios are higher, to more remote regions, where this ratio is lower and, hence, the ultimate yield of SOA is higher. As a result, benzene is estimated to be the most important aromatic species with regards to formation of SOA, with a total production nearly equal that of toluene and xylene combined. In total, while only 39% percent of the aromatic species react via the low-NOx pathway, 72% of the aromatic SOA is formed via this mechanism. Predicted SOA concentrations from aromatics in the Eastern United States and Eastern Europe are actually largest during the summer, when the [NO]/[HO2] ratio is lower. Global production of SOA from aromatic sources is estimated at 3.5 Tg/yr, resulting in a global burden of 0.08 Tg, twice as large as previous estimates. The contribution of these largely anthropogenic sources to global SOA is still small relative to biogenic sources, which are estimated to comprise 90% of the global SOA burden, about half of which comes from isoprene. Compared to recent observations, it would appear there are additional pathways beyond those accounted for here for production of anthropogenic SOA. However, owing to differences in spatial distributions of sources and seasons of peak production, there are still regions in which aromatic SOA produced via the mechanisms identified here are predicted to contribute substantially to, and even dominate, the local SOA concentrations, such as outflow regions from North America and South East Asia during the wintertime, though total SOA concentrations there are small (~0.1 μg/m^³)
Hammerhead, an ultrahigh resolution ePix camera for wavelength-dispersive spectrometers
Wavelength-dispersive spectrometers (WDS) are often used in synchrotron and
FEL applications where high energy resolution (in the order of eV) is
important. Increasing WDS energy resolution requires increasing spatial
resolution of the detectors in the dispersion direction. The common approaches
with strip detectors or small pixel detectors are not ideal. We present a novel
approach, with a sensor using rectangular pixels with a high aspect ratio
(between strips and pixels, further called "strixels"), and strixel
redistribution to match the square pixel arrays of typical ASICs while avoiding
the considerable effort of redesigning ASICs. This results in a sensor area of
17.4 mm x 77 mm, with a fine pitch of 25 m in the horizontal direction
resulting in 3072 columns and 176 rows. The sensors use ePix100 readout ASICs,
leveraging their low noise (43 e, or 180 eV rms). We present results
obtained with a Hammerhead ePix100 camera, showing that the small pitch (25
m) in the dispersion direction maximizes performance for both high and low
photon occupancies, resulting in optimal WDS energy resolution. The low noise
level at high photon occupancy allows precise photon counting, while at low
occupancy, both the energy and the subpixel position can be reconstructed for
every photon, allowing an ultrahigh resolution (in the order of 1 m) in
the dispersion direction and rejection of scattered beam and harmonics. Using
strixel sensors with redistribution and flip-chip bonding to standard ePix
readout ASICs results in ultrahigh position resolution (1 m) and low
noise in WDS applications, leveraging the advantages of hybrid pixel detectors
(high production yield, good availability, relatively inexpensive) while
minimizing development complexity through sharing the ASIC, hardware, software
and DAQ development with existing versions of ePix cameras.Comment: 8 pages, 6 figure
Dynamic correlations in stochastic rotation dynamics
The dynamic structure factor, vorticity and entropy density dynamic
correlation functions are measured for Stochastic Rotation Dynamics (SRD), a
particle based algorithm for fluctuating fluids. This allows us to obtain
unbiased values for the longitudinal transport coefficients such as thermal
diffusivity and bulk viscosity. The results are in good agreement with earlier
numerical and theoretical results, and it is shown for the first time that the
bulk viscosity is indeed zero for this algorithm. In addition, corrections to
the self-diffusion coefficient and shear viscosity arising from the breakdown
of the molecular chaos approximation at small mean free paths are analyzed. In
addition to deriving the form of the leading correlation corrections to these
transport coefficients, the probabilities that two and three particles remain
collision partners for consecutive time steps are derived analytically in the
limit of small mean free path. The results of this paper verify that we have an
excellent understanding of the SRD algorithm at the kinetic level and that
analytic expressions for the transport coefficients derived elsewhere do indeed
provide a very accurate description of the SRD fluid.Comment: 33 pages including 16 figure
Multi-particle-collision dynamics: Flow around a circular and a square cylinder
A particle-based model for mesoscopic fluid dynamics is used to simulate
steady and unsteady flows around a circular and a square cylinder in a
two-dimensional channel for a range of Reynolds number between 10 and 130.
Numerical results for the recirculation length, the drag coefficient, and the
Strouhal number are reported and compared with previous experimental
measurements and computational fluid dynamics data. The good agreement
demonstrates the potential of this method for the investigation of complex
flows.Comment: 6 pages, separated figures in .jpg format, to be published in
Europhysics Letter
- …