50 research outputs found
Cooling-Rate Effects in Sodium Silicate Glasses: Bridging the Gap between Molecular Dynamics Simulations and Experiments
Although molecular dynamics (MD) simulations are commonly used to predict the
structure and properties of glasses, they are intrinsically limited to short
time scales, necessitating the use of fast cooling rates. It is therefore
challenging to compare results from MD simulations to experimental results for
glasses cooled on typical laboratory time scales. Based on MD simulations of a
sodium silicate glass with varying cooling rate (from 0.01 to 100 K/ps), here
we show that thermal history primarily affects the medium-range order
structure, while the short-range order is largely unaffected over the range of
cooling rates simulated. This results in a decoupling between the enthalpy and
volume relaxation functions, where the enthalpy quickly plateaus as the cooling
rate decreases, whereas density exhibits a slower relaxation. Finally, we
demonstrate that the outcomes of MD simulations can be meaningfully compared to
experimental values if properly extrapolated to slower cooling rates
Ancestral Inference and the Study of Codon Bias Evolution: Implications for Molecular Evolutionary Analyses of the Drosophila melanogaster Subgroup
Reliable inference of ancestral sequences can be critical to identifying both patterns and causes of molecular evolution. Robustness of ancestral inference is often assumed among closely related species, but tests of this assumption have been limited. Here, we examine the performance of inference methods for data simulated under scenarios of codon bias evolution within the Drosophila melanogaster subgroup. Genome sequence data for multiple, closely related species within this subgroup make it an important system for studying molecular evolutionary genetics. The effects of asymmetric and lineage-specific substitution rates (i.e., varying levels of codon usage bias and departures from equilibrium) on the reliability of ancestral codon usage was investigated. Maximum parsimony inference, which has been widely employed in analyses of Drosophila codon bias evolution, was compared to an approach that attempts to account for uncertainty in ancestral inference by weighting ancestral reconstructions by their posterior probabilities. The latter approach employs maximum likelihood estimation of rate and base composition parameters. For equilibrium and most non-equilibrium scenarios that were investigated, the probabilistic method appears to generate reliable ancestral codon bias inferences for molecular evolutionary studies within the D. melanogaster subgroup. These reconstructions are more reliable than parsimony inference, especially when codon usage is strongly skewed. However, inference biases are considerable for both methods under particular departures from stationarity (i.e., when adaptive evolution is prevalent). Reliability of inference can be sensitive to branch lengths, asymmetry in substitution rates, and the locations and nature of lineage-specific processes within a gene tree. Inference reliability, even among closely related species, can be strongly affected by (potentially unknown) patterns of molecular evolution in lineages ancestral to those of interest
Incident type 2 diabetes attributable to suboptimal diet in 184 countries
The global burden of diet-attributable type 2 diabetes (T2D) is not well established. This risk assessment model estimated T2D incidence among adults attributable to direct and body weight-mediated effects of 11 dietary factors in 184 countries in 1990 and 2018. In 2018, suboptimal intake of these dietary factors was estimated to be attributable to 14.1 million (95% uncertainty interval (UI), 13.8–14.4 million) incident T2D cases, representing 70.3% (68.8–71.8%) of new cases globally. Largest T2D burdens were attributable to insufficient whole-grain intake (26.1% (25.0–27.1%)), excess refined rice and wheat intake (24.6% (22.3–27.2%)) and excess processed meat intake (20.3% (18.3–23.5%)). Across regions, highest proportional burdens were in central and eastern Europe and central Asia (85.6% (83.4–87.7%)) and Latin America and the Caribbean (81.8% (80.1–83.4%)); and lowest proportional burdens were in South Asia (55.4% (52.1–60.7%)). Proportions of diet-attributable T2D were generally larger in men than in women and were inversely correlated with age. Diet-attributable T2D was generally larger among urban versus rural residents and higher versus lower educated individuals, except in high-income countries, central and eastern Europe and central Asia, where burdens were larger in rural residents and in lower educated individuals. Compared with 1990, global diet-attributable T2D increased by 2.6 absolute percentage points (8.6 million more cases) in 2018, with variation in these trends by world region and dietary factor. These findings inform nutritional priorities and clinical and public health planning to improve dietary quality and reduce T2D globally.publishedVersio
Children’s and adolescents’ rising animal-source food intakes in 1990–2018 were impacted by age, region, parental education and urbanicity
Animal-source foods (ASF) provide nutrition for children and adolescents’ physical and cognitive development. Here, we use data from the Global Dietary Database and Bayesian hierarchical models to quantify global, regional and national ASF intakes between 1990 and 2018 by age group across 185 countries, representing 93% of the world’s child population. Mean ASF intake was 1.9 servings per day, representing 16% of children consuming at least three daily servings. Intake was similar between boys and girls, but higher among urban children with educated parents. Consumption varied by age from 0.6 at <1 year to 2.5 servings per day at 15–19 years. Between 1990 and 2018, mean ASF intake increased by 0.5 servings per week, with increases in all regions except sub-Saharan Africa. In 2018, total ASF consumption was highest in Russia, Brazil, Mexico and Turkey, and lowest in Uganda, India, Kenya and Bangladesh. These findings can inform policy to address malnutrition through targeted ASF consumption programmes.publishedVersio
Removal of cadmium(II) from aqueous solutions by steam-activated sulphurised carbon prepared from sugar-cane bagasse pith: kinetics and equilibrium studies
Removal of cadmium(II) from aqueous solutions was studied using steam activated sulphurised carbon (SA-S-C) prepared from bagasse pith (a sugar-cane industry waste). Batch adsorption experiments were performed as a function of solute concentration, contact time, adsorbent dose, pH, temperature and ionic strength. The maximum removal took place in the pH range of 5.0 to 9.0. The maximum adsorption of 98.8 % (24.70 mg/g) took place by SA-S-C with 8.9 % sulphur content at pH 6.0 from an initial Cd(II) concentration of 50 mg/dm3. The sorption process follows pseudo-second-order kinetics. Kinetic parameters as a function of initial concentration and temperature were determined to predict the adsorption behaviour of Cd(II) onto SA-S-C. Decrease in ionic strength of the solution was found to improve the adsorption capacity of the adsorbent. The equilibrium data could be best fitted by the Langmuir adsorption isotherm equation over the entire concentration range (50 to 1 000 mg/dm3). The effectiveness of the SA-S-C for Cd(II) removal was examined and compared with other adsorbents reported in the literature. At solution pH of 6.0, the maximum adsorption capacity of SA-S-C calculated by the Langmuir isotherm is 149.93 mg/g at 30°C. Acid regeneration was tried for several cycles with a view to recover the sorbed metal ions and also to restore the sorbent to its original state.
Keywords: Adsorption dynamics , Langmuir equation, Cd(II) removal, Sulphurised carbon, Desorption
(WaterSA: 2003 29(2): 147-156
Batch Adsorption Studies Incorporating Response Surface Methodology for the Elimination of Acephate
Banned pesticides are continuously preferred by the planters of the Idukki District irrespective of their toxicity. Among the banned pesticides, acephate is preferred because of its high solubility in water and persistent character. Unfortunately, it detriments the biota, leading to neurogenic, carcinogenic, and physiological disorders in fish. The plantation near the Periyar River basin is contaminated with residues of pesticides, which eventually drain into the river. There is an urgent need for the removal of acephate. Therefore, we have focused on the removal of acephate into the lab scale. Batch adsorption studies were carried out for the removal of acephate. We selected a material Fe-MMT (Fe3O4-montmorillonite), which is benign and possesses a high adsorption capacity towards acephate. Adsorbent properties were examined by various analytical tools XRD, SEM, FTIR, and a Surface area analyzer. Adsorption followed Langmuir with first-order kinetic. Kinetic plots exhibited multistage adsorption, indicating film diffusion and pore diffusion during the adsorption or the mechanism of adsorption is chemisorption, physisorption, and Lewis’s acid-base interaction. Response surface methodology involving CCD (central composite design) was extracted to maximize the adsorption of acephate onto Fe-MMT. Dosage and concentration seem to be the major parameters that influenced the adsorption. Adsorption achieved a peak (83.18%) at optimum conditions corresponding to pH 6, initial acephate concentration of 2 mg/L, and adsorbent dosage corresponding to 0.5 g/L
A preliminary examination of the adsorption characteristics of Pb(II) ions using sulphurised activated carbon prepared from bagasse pith
32-40Bagasse pith, a sugar industry waste, has
been converted into sulphurised activated carbon by carbonisation at 200°C under
N2 for 2h, followed by steam activation in presence of SO2
and H2S at 400°C for 2h. The adsorption characteristics of Pb(II) ions
on activated carbon have been examined from aqueous solutions using batch
technique. The effect of agitation
period, initial concentration of sorbate,
pH, ionic strength, temperature and particle size of the adsorbent has been
studied to optimise the conditions for maximum removal of Pb(II) ions. The maximum
removal takes place in the pH range of 4.0-8.0.With an initial concentration
of Pb(II) at 50 mg/L at 30°C and pH 6.0, its removal has been found to be
99.8%. The process of uptake is governed by a pseudo-second-order kinetics. Kinetic
parameters as a function of initial concentration and temperature have been calculated.
Decrease in ionic strength and increase in temperature of the solution has been
found to improve the uptake of Pb(II). Studies show that the adsorption decreases
with an increase in particle size of the adsorbent. Sorption data of Pb(II) in
the concentration range 50-1000 mg/L have been correlated with Langmuir isotherm
model. Sulphurised activated carbon had adsorption capacities for Pb(II) from
200.08 mg/g at 30°C to 243.93 mg/g at 60°C, which is much higher than the values
for the adsorbent materials reported in the literature. The adsorbent has been
satisfactorily used for the removal of Pb(II) from synthetic wastewaters. The adsorbed
Pb(II) ions are completely recovered with 0.2 M HCl
Uptake of Heavy Metals in Batch Systems by Sulfurized Steam Activated Carbon Prepared from Sugarcane Bagasse Pith
Scholars Journal of Medical Case Reports ISSN 2347-9507 (Print) A case of fibro muscular dysplasia with abdominal aortic aneurysm
Abstract: Fibro muscular dysplasia is a non-atherosclerotic, non-inflammatory disease that most commonly affects the renal and internal carotid arteries. Fibro muscular dysplasia as a cause of abdominal aortic aneurysm is rarely reported. Here we report a case of fibro muscular dysplasia associated with abdominal aortic aneurysm in a 35 year old lady, who presented with vague abdominal discomfort and claudication pain of both lower limbs