137 research outputs found
Recommended from our members
Inelastic Displacement Ratios of Degrading Systems
Seismic code provisions in several countries have recently adopted the new concept of performance-based design. New analysis procedures have been developed to estimate seismic demands for performance evaluation. Most of these procedures are based on simple material models though, and do not take into account degradation effects, a major factor influencing structural behavior under earthquake excitations. More importantly, most of these models cannot predict collapse of structures under seismic loads. This study presents a newly developed model that incorporates degradation effects into seismic analysis of structures. A new energy-based approach is used to define several types of degradation effects. The model also permits collapse prediction of structures under seismic excitations. The model was used to conduct extensive statistical dynamic analysis of different structural systems subjected to a large ensemble of recent earthquake records. The results were used to propose approximate methods for estimating maximum inelastic displacements of degrading systems for use in performance-based seismic code provisions. The findings provide necessary information for the design evaluation phase of a performance-based earthquake design process, and could be used for evaluation and modification of existing seismic codes of practice
Recommended from our members
Minimum cost performance-based seismic design of reinforced concrete frames with pushover and nonlinear response-history analysis
Previous studies compare results of pushover and nonlinear response-history analysis of predesigned reinforced concrete frames. The present study employs nonlinear response-history analysis and pushover analysis with the N2 method in a computational framework for the optimum performancebased seismic design of reinforced concrete frames according to the fib Model Code 2010 methodology and compares their obtained design solutions in terms of cost and structural performance. It is found that the minimum costs of pushover-based designs are similar to the costs from response-history analysis for regular frames but the pushover-based designs can be more expensive for irregular frames. Furthermore, the pushover-based designs are not guaranteed to satisfy performance objectives when subjected to response-history analysis even when more than one lateral load distributions are applied
Modified generalized pushover analysis for estimating longitudinal seismic demands of bridges with elevated pile foundation systems
Classification System for Semi-Rigid Beam-to-Column Connections
The current study attempts to recognise an adequate classification for a semi-rigid beam-to-column connection by investigating strength, stiffness and ductility. For this purpose, an experimental test was carried out to investigate the moment-rotation (M-theta) features of flush end-plate (FEP) connections including variable parameters like size and number of bolts, thickness of end-plate, and finally, size of beams and columns. The initial elastic stiffness and ultimate moment capacity of connections were determined by an extensive analytical procedure from the proposed method prescribed by ANSI/AISC 360-10, and Eurocode 3 Part 1-8 specifications. The behaviour of beams with partially restrained or semi-rigid connections were also studied by incorporating classical analysis methods. The results confirmed that thickness of the column flange and end-plate substantially govern over the initial rotational stiffness of of flush end-plate connections. The results also clearly showed that EC3 provided a more reliable classification index for flush end-plate (FEP) connections. The findings from this study make significant contributions to the current literature as the actual response characteristics of such connections are non-linear. Therefore, such semirigid behaviour should be used to for an analysis and design method
Collapse risk and residual drift performance of steel buildings using post-tensioned MRFs and viscous dampers in near-fault regions
The potential of post-tensioned self-centering moment-resisting frames (SC-MRFs) and viscous dampers to reduce the collapse risk and improve the residual drift performance of steel buildings in near-fault regions is evaluated. For this purpose, a prototype steel building is designed using different seismic-resistant frames, i.e.: moment-resisting frames (MRFs); MRFs with viscous dampers; SC-MRFs; and SC-MRFs with viscous dampers. The frames are modeled in OpenSees where material and geometrical nonlinearities are taken into account as well as stiffness and strength deterioration. A database of 91 near-fault, pulse-like ground motions with varying pulse periods is used to conduct incremental dynamic analysis (IDA), in which each ground motion is scaled until collapse occurs. The probability of collapse and the probability of exceeding different residual story drift threshold values are calculated as a function of the ground motion intensity and the period of the velocity pulse. The results of IDA are then combined with probabilistic seismic hazard analysis models that account for near-fault directivity to assess and compare the collapse risk and the residual drift performance of the frames. The paper highlights the benefit of combining the post-tensioning and supplemental viscous damping technologies in the near-source. In particular, the SC-MRF with viscous dampers is found to achieve significant reductions in collapse risk and probability of exceedance of residual story drift threshold values compared to the MRF. © 2016 Springer Science+Business Media Dordrech
Seismic damage estimation of in-plane regular steel moment resisting and x-braced frames
Simple empirical expressions to estimate maximum seismic damage on the basis of five well known damage indices for planar regular moment resisting and x-braced steel frames are presented. They are based on the results of extensive parametric studies concerning the inelastic response of a large number of these frames to a large number of ground motions. Thousands of nonlinear dynamic analyses are performed by scaling the seismic records to different intensities in order to drive the structures to different levels of inelastic deformation and finally to collapse. The statistical analysis of the created response databank indicates that the number of stories, period of vibration, stiffness ratio, capacity factor (for moment resisting frames), brace slenderness ratio and column stiffness (for x-braced frames) and characteristics of the ground motion, such as characteristic period and spectral acceleration, strongly influence damage. Nonlinear regression analysis is employed in order to derive simple formulae, which reflect the influence of the aforementioned parameters and offer a direct estimation of the damage indices used in this study. More specifically, given the characteristics of the structure and the ground motion, one can calculate the maximum damage observed in column bases and beams (for moment resisting frames) or in braces (for x-braced frames). Finally, two examples serve to illustrate the use of the proposed expressions and demonstrate their accuracy and efficiency. © 2012 Springer Science+Business Media Dordrecht
An Energy-Based Approach to the Generalized Optimal Locations of Viscous Dampers in Two-Way Asymmetrical Buildings
- …