Development and testing of hermetic, laser-ignited pyrotechnic and explosive components

During the last decade there has been increasing interest in the use of lasers in place of electrical systems to ignite various pyrotechnic and explosive materials. The principal driving force for this work was the requirement for safer energetic components which would be insensitive to electrostatic and electromagnetic radiation. In the last few years this research has accelerated since the basic concepts have proven viable. At the present time it is appropriate to shift the research emphasis in laser initiation from the scientific arena--whether it can be done--to the engineering realm--how it can be put into actual practice in the field. Laser initiation research and development at EG&G Mound was in three principal areas: (1) laser/energetic material interactions; (2) development of novel processing techniques for fabricating hermetic (helium leak rate of less than 1 x 10(exp -8) cu cm/s) laser components; and (3) evaluation and testing of laser-ignited components. Research in these three areas has resulted in the development of high quality, hermetic, laser initiated components. Examples are presented which demonstrate the practicality of fabricating hermetic, laser initiated explosive or pyrotechnic components that can be used in the next generation of ignitors, actuators, and detonators

Low-temperature hermetic sealing of optical fiber components

A method for manufacturing low-temperature hermetically sealed optical fiber components is provided. The method comprises the steps of: inserting an optical fiber into a housing, the optical fiber having a glass core, a glass cladding and a protective buffer layer disposed around the core and cladding; heating the housing to a predetermined temperature, the predetermined temperature being below a melting point for the protective buffer layer and above a melting point of a solder; placing the solder in communication with the heated housing to allow the solder to form an eutectic and thereby fill a gap between the interior of the housing and the optical fiber; and cooling the housing to allow the solder to form a hermetic compression seal between the housing and the optical fiber

Beam Scraping to detect and remove Halo in LHC Injection

Fast scrapers are installed in the SPS to detect and remove beam halo before extraction of beams to the LHC, to minimize the probability for quenching of superconducting magnets in the LHC. We shortly describe the current system and then focus on our recent work, which aims at providing a system which can be used as operational tool for standard LHC injection. A new control application was written and tested with the beam. We describe the current status and results and compare these with detailed simulations

Materials Technology Support for Radioisotope Power Systems Final Report

Over the period of this sponsored research, UDRI performed a number of materials related tasks that helped to facilitate increased understanding of the properties and applications of a number of candidate program related materials including; effects of neutron irradiation on tantalum alloys using a 500kW reactor, thermodynamic based modeling of the chemical species in weld pools, and the application of candidate coatings for increased oxidation resistance of FWPF (Fine Weave Pierced Fabric) modules

Amplitude Modulation and Relaxation-Oscillation of Counterpropagating Rolls within a Broken-Symmetry Laser-Induced Electroconvection Strip

We report a liquid-crystal pattern-formation experiment in which we break the lateral (translational) symmetry of a nematic medium with a laser-induced thermal gradient. The work is motivated by an improved measurement (reported here) of the temperature dependence of the electroconvection threshold voltage in planar-nematic 4-methoxybenzylidene-4-butylaniline (MBBA). In contrast with other broken-symmetry-pattern studies that report a uniform drift, we observe a strip of counterpropagating rolls that collide at a sink point, and a strong temporally periodic amplitude modulation within a width of 3-4 rolls about the sink point. The time dependence of the amplitude at a fixed position is periodic but displays a nonsinusoidal relaxation-oscillation profile. After reporting experimental results based on spacetime contours and wavenumber profiles, along with a measurement of the change in the drift frequency with applied voltage at a fixed control parameter, we propose some potential guidelines for a theoretical model based on saddle-point solutions for Eckhaus-unstable states and coupled complex Ginzburg-Landau equations. Published in PRE 73, 036317 (2006).Comment: Published in Physical Review E in March 200

Smartphone-recorded physical activity for estimating cardiorespiratory fitness

Abstract While cardiorespiratory fitness is strongly associated with mortality and diverse outcomes, routine measurement is limited. We used smartphone-derived physical activity data to estimate fitness among 50 older adults. We recruited iPhone owners undergoing cardiac stress testing and collected recent iPhone physical activity data. Cardiorespiratory fitness was measured as peak metabolic equivalents of task (METs) achieved on cardiac stress test. We then estimated peak METs using multivariable regression models incorporating iPhone physical activity data, and validated with bootstrapping. Individual smartphone variables most significantly correlated with peak METs (p-values both < 0.001) included daily peak gait speed averaged over the preceding 30 days (r = 0.63) and root mean square of the successive differences of daily distance averaged over 365 days (r = 0.57). The best-performing multivariable regression model included the latter variable, as well as age and body mass index. This model explained 68% of variability in observed METs (95% CI 46%, 81%), and estimated peak METs with a bootstrapped mean absolute error of 1.28 METs (95% CI 0.98, 1.60). Our model using smartphone physical activity estimated cardiorespiratory fitness with high performance. Our results suggest larger, independent samples might yield estimates accurate and precise for risk stratification and disease prognostication

Impedance spectroscopy characterization of neutron irradiated thermoelectric modules for space nuclear power

The European Space Agency is currently supporting the research and development of advanced radioisotope power systems utilising thermoelectric modules. The performance of thermoelectric modules following exposure to neutron radiation is of significant interest due to the likely application of radioisotope thermoelectric generators in deep space exploration or planetary landers requiring prolonged periods of operation. This study utilises impedance spectroscopy to characterise the effects of neutron irradiation on the performance of complete thermoelectric modules, as opposed to standalone material. For a 50 We americium-241 radioisotope thermoelectric generator design, it is estimated that the TE modules could be exposed to a total integrated flux of approximately 5 × 1013 neutrons cm-2 (>1 MeV). In this study, an equivalent neutron dose was simulated experimentally via an acute 2-hour exposure in a research pool reactor. Bi2Te3-based thermoelectric modules with different leg aspect ratios and microstructures were investigated. Gamma-ray spectroscopy was initially used to identify activated radionuclides and hence quantify irradiation induced transmutation doping. To evaluate the thermoelectric properties pre- and post-irradiation, impedance spectroscopy characterization was employed. Isochronal thermal annealing of defects imparted by the irradiation process, revealed that polycrystalline based modules required significantly higher temperature than those with a monolithic microstructure. Whilst this may indicate a greater susceptibility to neutron irradiation, all tested modules demonstrated sufficient radiation hardness for use within an americium-241 radioisotope thermoelectric generator. Furthermore, the work reported demonstrates that impedance spectroscopy is a highly capably diagnostic tool for characterising the in-service degradation of complete thermoelectric devices

Haiti : the South African perspective

The original publication is available at http://www.samj.org.zaBackground and problem statement. The South African response to the Haitian earthquake consisted of two independent nongovernment organisations (NGOs) working separately with minimal contact. Both teams experienced problems during the deployment, mainly owing to not following the International Search and Rescue Advisory Group (INSARAG) guidelines. Critical areas identified. To improve future South African disaster responses, three functional deployment categories were identified: urban search and rescue, triage and initial stabilisation, and definitive care. To best achieve this, four critical components need to be taken into account: rapid deployment, intelligence from the site, government facilitation, and working under the auspices of recognized organisations such as the United Nations and the World Health Organization. Conclusion. The proposed way forward for South African medical teams responding to disasters is to be unified under a leading academic body, to have an up-to-date volunteer database, and for volunteers to be current with the international search and rescue course currently being developed by the Medical Working Group of INSARAG. An additional consideration is that South African rescue and relief personnel have a primary responsibility to the citizens of South Africa, then the Southern African Development Community region, then the rest of the African continent and finally further afield. The commitment of government, private and military health services as well as NGOs is paramount for a unified response.Publishers' versio

68-year old man with progressive weakness and ventilator dependent respiratory failure: a case report of sporadic late onset nemaline myopathy

Background: Neuromuscular pathologies must be considered when caring for patients with persistent or progressive respiratory failure. Pertinent disease states may involve skeletal muscles of respiration or associated neurologic structures including motor neurons, peripheral neurons and the neuromuscular junction. Diagnosis may require pulmonary function testing, neurophysiologic studies, imaging, and/or muscle biopsy. Case presentation: A 68-year-old male was transferred to our intensive care unit (ICU) for management of ventilator dependent respiratory failure. Upon further historical review, he described gradually worsening gait instability and muscle weakness, which was previously attributed to vascular Parkinsonism in the setting of known cerebrovascular disease. Upon arrival to our hospital, he was found to have elevated muscle specific enzymes, prompting evaluation for neuromuscular causes of respiratory failure. He was also found to have elevated HMG-CoA Reductase (HMGCR) antibodies. Ultimately, a right quadriceps muscle biopsy was performed and electron microscopy identified nemaline bodies within skeletal myofibers. Given the clinical course and other histopathologic findings, he was diagnosed with Sporadic late-onset nemaline myopathy (SLONM). Conclusion: The diagnosis of neuromuscular disease in patients with ventilator dependent respiratory failure is challenging. A detailed history of a patient\u27s clinical course prior to hospitalization is key and may raise suspicion for underlying neuromuscular pathology. Further evaluation in non-critically ill patients may include pulmonary function, electromyography and confirmatory muscle biopsy. Sporadic late onset nemaline myopathy remains a rare disease entity which rarely presents with respiratory failure and lacks effective treatment

An improved automated immunoassay for C-reactive protein on the Dimension® clinical chemistry system

Recent clinical data indicate that the measurement of the concentration of C-reactive protein (CRP) requires a higher sensitivity and wider dynamic range than most of the current methods can offer. Our goal was to develop a totally automated and highly sensitive CRP assay with an extended range on the Dimension® clinical chemistry system based on particle-enhanced turbidimetric-immunoassay (PETIA) technology. The improved method was optimized and compared to the Binding Site's radial immunodiffusion assay using disease state specimens to minimize interference. Assay performance was assessed on the Dimension® system in a 12-instrument inter-laboratory comparison study. A split-sample comparison (n = 622) was performed between the improved CRP method on the Dimension® system and the N Latex CRP mono method on the Behring Nephelometer, using a number of reagent and calibrator lots on multiple instruments. The method was also referenced to the standard material, CRM470, provided by the International Federation of Clinical Chemistry (IFCC). The improved CRP method was linear to 265.1mg/l with a detection limit between 0.2 and 0.5mg/l. The method detects antigen excess from the upper assay limit to 2000mg/l, thereby allowing users to retest the sample with dilution. Calibration was stable for 60 days. The within-run reproducibility (CV) was less than 5.1% and total reproducibility ranged from 1.1 to 6.7% between 3.3 and 265.4mg/l CRP. Linear regression analysis of the results on the improved Dimension® method (DM) versus the Behring Nephelometer (BN) yielded the following equation: DM = 0.99 × BN − 0.37; r = 0.992. Minimal interference was observed from sera of patients with elevated IgM, IgG and IgA. The recovery of the IFCC standard was within 100 ± 7 % across multiple lots of reagent and calibrator. The improved CRP method provided a sensitive, accurate and rapid approach to quantify CRP in serum and plasma on the Dimension® clinical chemistry system. The ability to detect antigen excess eliminated reporting falsely low results caused by the ‘prozone effect’