1,331 research outputs found
Longitudinal phase space manipulation in energy recovering linac-driven free-electron lasers
Energy recovering an electron beam after it has participated in a
free-electron laser (FEL) interaction can be quite challenging because of the
substantial FEL-induced energy spread and the energy anti-damping that occurs
during deceleration. In the Jefferson Lab infrared FEL driver-accelerator, such
an energy recovery scheme was implemented by properly matching the longitudinal
phase space throughout the recirculation transport by employing the so-called
energy compression scheme. In the present paper,after presenting a
single-particle dynamics approach of the method used to energy-recover the
electron beam, we report on experimental validation of the method obtained by
measurements of the so-called "compression efficiency" and "momentum
compaction" lattice transfer maps at different locations in the recirculation
transport line. We also compare these measurements with numerical tracking
simulations.Comment: 31 pages, 13 figures, submitted to Phys. Rev. Special Topics A&
Driver Accelerator Design for the 10 kW Upgrade of the Jefferson Lab IR FEL
An upgrade of the Jefferson Lab IR FEL is now under construction. It will
provide 10 kW output light power in a wavelength range of 2-10 microns. The FEL
will be driven by a modest-sized 80-210 MeV, 10 mA energy-recovering
superconducting RF (SRF) linac. Stringent phase space requirements at the
wiggler, low beam energy, and high beam current subject the design to numerous
constraints. These are imposed by the need for both transverse and longitudinal
phase space management, the potential impact of collective phenomena (space
charge, wakefields, beam break-up (BBU), and coherent synchrotron radiation
(CSR)), and interactions between the FEL and the accelerator RF system. This
report addresses these issues and presents an accelerator design solution
meeting the requirements imposed by physical phenomena and operational
necessities.Comment: submission THC03 for LINAC200
High Average Brilliance Compact Inverse Compton Light Source
There exists an increasing demand for compact Inverse Compton Light Sources (ICLS) capable of producing substantial fluxes of narrow-band X-rays. While multiple design proposals have been made, compared to typical bremsstrahlung sources, most of these have comparable fluxes and improve on the brilliance within a 0.1% bandwidth by only a few orders of magnitude. By applying cw superconducting rf beam acceleration and rf focusing to produce a beam of small emittance and magnetic focusing to produce a small spot size on the order of a few microns at collision, the source presented here provides a 12 keV X-ray beam which outperforms other compact designs and bremsstrahlung sources. Compared to a bremsstrahlung source, the flux is improved by at least an order of magnitude and the average brilliance by six orders of magnitude. Surpassing other compact ICLS designs, the source presented here is attractive to a wide variety of potential users
Scattered Spectra from Inverse Compton Sources Operating at High Laser Fields and High Electron Energies
As Compton x-ray and gamma-ray sources become more prevalent, to understand their performance in a precise way, it becomes important to be able to compute the distribution of scattered photons precisely. For example, codes have been developed at Old Dominion University which were used to understand the performance of the Dresden Compton Source in detail. An ideal model would (i) include the full Compton effect frequency relations between incident and scattered photons, (ii) allow the field strength to be large enough that nonlinear effects are captured, and (iii) allow the effects of electron beam emittance to be introduced and studied. Various authors have considered various pieces of this problem, but until now, no analytical or numerical procedure is known to us that captures these three effects simultaneously. Here we present a model for spectrum calculations which simultaneously cover these aspects. The model is compared to a published full quantum mechanical calculation and found to agree for a case where both full Compton effect and nonlinear field strength are present. We use this model to investigate chirping prescriptions to mitigate ponderomotive broadening
Recommended from our members
Analyzing measurements of nonlinear transfer functions with Tschebyshev polynomials
Recently, due to advances in computers and data aquisition systems, the following type of measurement has become more common: (1) Impress a given modulation on a device to be tested. (2) Acquire a data stream, usually at equally spaced sample intervals, of the response of the system to the modulation. (3) Fit the data thereby acquired to some nonlinear function set that might (or might not!) describe the response of the device. In this paper it is pointed out that by choosing to modulate the test parameter sinusoidally, and by fast-Fourier transforming the acquired data stream, one unambiguously determines the Tschebyshev expansion of the response function around the working point, potentially yielding quantitative information about high nonlinear orders in the system response. The need for data fitting is thereby eliminated. A detailed example, the analysis of the nonlinear phase-phase transfer function in the Jefferson Lab injector, is presented
- …