Genetic architecture of rainbow trout survival from egg to adult

Survival from birth to a reproductive adult is a challenge that only robust individuals resistant to a variety of mortality factors will overcome. To assess whether survival traits share genetic architecture throughout the life cycle, we estimated genetic correlations for survival within fingerling stage, and across egg, fingerling and grow-out stages in farmed rainbow trout. Genetic parameters of survival at three life cycle stages were estimated for 249 166 individuals originating from ten year classes of a pedigreed population. Despite being an important fitness component, survival traits harboured significant but modest amount of genetic variation (h2=0·07–0·27). Weak associations between survival during egg-fry and fingerling periods, between early and late fingerling periods (rG=0·30) and generally low genetic correlations between fingerling and grow-out survival (mean rG=0·06) suggested that life-stage specific survival traits are best regarded as separate traits. However, in the sub-set of data with detailed time of death records, positive genetic correlations between early and late fingerling survival (rG=0·89) showed that during certain years the best genotypes in the early period were also among the best in the late period. That survival across fingerling period can be genetically the same, trait was indicated also by only slightly higher heritability (h2=0·15) estimated with the survival analysis of time to death during fingerling period compared to the analysis treating fingerling survival as a binary character (h2=0·11). The results imply that (1) inherited resistance against unknown mortality factors exists, but (2) ranking of genotypes changes across life stages

Magnetic phases of one-dimensional lattices with 2 to 4 fermions per site

We study the spectral and magnetic properties of one-dimensional lattices filled with 2 to 4 fermions (with spin 1/2) per lattice site. We use a generalized Hubbard model that takes account all interactions on a lattice site, and solve the many-particle problem by exact diagonalization. We find an intriguing magnetic phase diagram which includes ferromagnetism, spin-one Heisenberg antiferromagnetism, and orbital antiferromagnetism.Comment: 8 pages, 6 figure

Effect of stellar flares on the upper atmospheres of HD 189733b and HD 209458b

Stellar flares are a frequent occurrence on young low-mass stars around which many detected exoplanets orbit. Flares are energetic, impulsive events, and their impact on exoplanetary atmospheres needs to be taken into account when interpreting transit observations. We have developed a model to describe the upper atmosphere of Extrasolar Giant Planets (EGPs) orbiting flaring stars. The model simulates thermal escape from the upper atmospheres of close-in EGPs. Ionisation by solar radiation and electron impact is included and photochemical and diffusive transport processes are simulated. This model is used to study the effect of stellar flares from the solar-like G star HD209458 and the young K star HD189733 on their respective planets. A hypothetical HD209458b-like planet orbiting the active M star AU Mic is also simulated. We find that the neutral upper atmosphere of EGPs is not significantly affected by typical flares. Therefore, stellar flares alone would not cause large enough changes in planetary mass loss to explain the variations in HD189733b transit depth seen in previous studies, although we show that it may be possible that an extreme stellar proton event could result in the required mass loss. Our simulations do however reveal an enhancement in electron number density in the ionosphere of these planets, the peak of which is located in the layer where stellar X-rays are absorbed. Electron densities are found to reach 2.2 to 3.5 times pre-flare levels and enhanced electron densities last from about 3 to 10 hours after the onset of the flare. The strength of the flare and the width of its spectral energy distribution affect the range of altitudes that see enhancements in ionisation. A large broadband continuum component in the XUV portion of the flaring spectrum in very young flare stars, such as AU Mic, results in a broad range of altitudes affected in planets orbiting this star.Comment: accepted for publication in A&

Factors Affecting Atrazine Fate in North Central U.S. soils

Atrazine (6-chloro-N-ethyl-N′-(l-methylethyl)-l,3,5-triazine-2,4-diamine) is a herbicide of the triazine family used for controlling broadleaf and some grassy weeds in corn and sorghum. Since its introduction in the late 1950s, atrazine has been a popular herbicide because it is relatively inexpensive and, in most cases, gives good season-long weed control. It can be applied pre-or postemergence and is often tank mixed with grass herbicides, such as alachlor (2-chloro-N-(2,6-diethylphenyl-N-(methoxymethyl)acetamide), metolachlor(2-chloro-N-(2-2ethyl-6-methylphenyl)-N-(2-methoxy-l-methylethyl) acetamide), butylate (S-ethyl bis(2-methylpropyl)carbamothioate), or EPTC (S-ethyl dipropylcarbamothioate), or with other broadleaf herbicides, such as dicamba (3,6-dichloro-2-methoxybenzoic acid), to obtain broad-spectrum weed control. Atrazine mixed with nicosulfuron {2-[[[[(4,6-dimethoxy-2-pyrimidinyl)amino]carbonyl]amino]sulfonyl]-N,N-dimethyl-3-pyridinecarboxamide} or bromoxynil (3,5-dibromo-4-hydro-xybenzonitrile) is commonly used across the northern Corn Belt; when mixed with cyanazine {2-[[4-chloro-6-(ethylamino)-l,3,5-triazin-2-yl]amino]-2-methylpropanenitrile}, it is commonly used in total weed control programs in southern Iowa, Illinois, Indiana, and Ohio

Characterization of Alachlor and Atrazine Desorption from Soils

Herbicide desorption isotherms may be affected by the amount of nondesorbable herbicide present in soil. Nondesorbable alachlor (as determined after methanol extraction) generally increased on a Waukegan silt loam (Typic Hapludolls) and a Ves clay loam (Udic Haplustolls) during five 0.01 M CaCl₂ desorptions. Atrazine was totally extracted with methanol from the Waukegan soil after one desorption using 0.01 M CaCl₂. However, after five desorptions with 0.01 M CaCl₂ an average of 5.5 and 15.5% of the total recovered atrazine from two atrazine application rates was methanol nondesorbable from the Waukegan and Ves soils, respectively. Freundlich desorption isotherms adjusted for nondesorbable herbicide accounted for as much as 71% of the difference between adsorption and desorption isotherms. Only a portion of the hysteresis observed can be attributable to nondesorbable herbicide

Adsorption and Desorption of Atrazine, Hydroxyatrazine, and S-Glutathione Atrazine on Two Soils

Adsorption and desorption isotherms for atrazine and two metabolites, hydroxyatrazine (HA) and S-glutathione atrazine (GSHA), were determined by batch equilibration on Plano and Waukegan silt loam soils at two soil pH levels (Plano, 6.1 and 4.5; Waukegan, 6.1 and 4.0). Freundlich adsorption isotherms were not affected by soil type except for GSHA at pH 4.0 to 4.5. When averaged over both soils, the order of adsorption at pH 6.1 was atrazine (Kf = 3.7) \u3c GSHA (Kf = 7.3) \u3c\u3c HA (Kf = 25) and at pH 4.0–4.5 was atrazine (Kf = 6.1) \u3c\u3c HA (Kf = 58) ≤ GSHA (Kf: Plano = 35; Waukegan = 78). The average slope of the adsorption isotherms (1/nads) was 0.81. The slopes of all desorption isotherms (1/ndes) were less than their respective 1/nads, indicating hysteresis. Atrazine desorbed into soil solution (1/ndes \u3e 0.0). With the exception of GSHA which desorbed from the pH 6.1 Plano silt loam (1/ndes = 0.15), desorption of HA and GSHA from other treatments was negligible (1/ndes = 0.0). Consequently, leaching of HA and GSHA in these and similar soils is not likely, due to high adsorption and low desorption

Alachlor Movement Through Intact Soil Columns Taken From Two Tillage Systems

Intact soil columns were evaluated as a screening technique to determine the effect of tillage on herbicide movement through soil. Alachlor was applied at 3.3 kg ai ha-1 to intact surface 0- to 10-cm and subsurface 10- to 20-cm soil columns (15-cm diam) taken from long-term no-till and conventional tillage plots and leached with 11.6 pore volumes (7 L; 39 cm) of water at a rate that did not create ponding. Leachate was collected in 0.07 pore volume fractions. Twice as much alachlor leached from surface no-till than from surface conventional tillage columns. The differences in leaching patterns from the surface soil can be attributed to the effect of tillage on soil physical and chemical properties. Using intact soil columns in the laboratory can be a useful rapid screening technique to evaluate tillage impacts on herbicide movement

Universal vortex formation in rotating traps with bosons and fermions

When a system consisting of many interacting particles is set rotating, it may form vortices. This is familiar to us from every-day life: you can observe vortices while stirring your coffee or watching a hurricane. In the world of quantum mechanics, famous examples of vortices are superconducting films and rotating bosonic $^4$He or fermionic $^3$He liquids. Vortices are also observed in rotating Bose-Einstein condensates in atomic traps and are predicted to exist for paired fermionic atoms. Here we show that the rotation of trapped particles with a repulsive interaction leads to a similar vortex formation, regardless of whether the particles are bosons or (unpaired) fermions. The exact, quantum mechanical many-particle wave function provides evidence that in fact, the mechanism of this vortex formation is the same for boson and fermion systems.Comment: 4 pages, 4 figure

Early Season Weed Suppression in Buckwheat Using Clopyralid

Currently there are no herbicides registered for direct application to buckwheat for broadleaf weed control. This 4-yr Lithuanian study examined weed control using several rates of clopyralid alone or combined with a single rate of desmedipham. Most applications were applied at the 1-leaf stage of crop growth, however, one rate of clopyralid was applied pre-emergence (PRE) in 2 of the 4 yr. Buckwheat injury was evident within a few days after application (or emergence) with all treatments, but by harvest, no symptoms were evident. In the 2 yr with greatest weed densities, densities were reduced with increasing clopyralid rates alone or with desmediphan. However, weed biomass and density were similar to the nontreated control at harvest. Common lambsquarters, scentless mayweed, wild buckwheat, and narrowleaf hawksbeard were species that were best (. 40% density reduction) controlled with clopyralid. With few exceptions, buckwheat yield in all herbicide-treated plots was similar to the nontreated control. Because yield was not increased with these herbicides, other weed control benefits, such as reduced interference with harvesting equipment or less dockage due to weed seed contamination, must be carefully weighed against the costs of herbicide and application and crop injury that reduced early-season vigor

Early Season Weed Suppression in Buckwheat Using Clopyralid

Currently there are no herbicides registered for direct application to buckwheat for broadleaf weed control. This 4-yr Lithuanian study examined weed control using several rates of clopyralid alone or combined with a single rate of desmedipham. Most applications were applied at the 1-leaf stage of crop growth, however, one rate of clopyralid was applied pre-emergence (PRE) in 2 of the 4 yr. Buckwheat injury was evident within a few days after application (or emergence) with all treatments, but by harvest, no symptoms were evident. In the 2 yr with greatest weed densities, densities were reduced with increasing clopyralid rates alone or with desmediphan. However, weed biomass and density were similar to the nontreated control at harvest. Common lambsquarters, scentless mayweed, wild buckwheat, and narrowleaf hawksbeard were species that were best (\u3e 40% density reduction) controlled with clopyralid. With few exceptions, buckwheat yield in all herbicide-treated plots was similar to the nontreated control. Because yield was not increased with these herbicides, other weed control benefits, such as reduced interference with harvesting equipment or less dockage due to weed seed contamination, must be carefully weighed against the costs of herbicide and application and crop injury that reduced early-season vigor