Phenomenological template family for black-hole coalescence waveforms

Recent progress in numerical relativity has enabled us to model the non-perturbative merger phase of the binary black-hole coalescence problem. Based on these results, we propose a phenomenological family of waveforms which can model the inspiral, merger, and ring-down stages of black hole coalescence. We also construct a template bank using this family of waveforms and discuss its implementation in the search for signatures of gravitational waves produced by black-hole coalescences in the data of ground-based interferometers. This template bank might enable us to extend the present inspiral searches to higher-mass binary black-hole systems, i.e., systems with total mass greater than about 80 solar masses, thereby increasing the reach of the current generation of ground-based detectors.Comment: Minor changes, Submitted to Class. Quantum Grav. (Proc. GWDAW11

Beam Test of Silicon Strip Sensors for the ZEUS Micro Vertex Detector

For the HERA upgrade, the ZEUS experiment has designed and installed a high precision Micro Vertex Detector (MVD) using single sided micro-strip sensors with capacitive charge division. The sensors have a readout pitch of 120 microns, with five intermediate strips (20 micron strip pitch). An extensive test program has been carried out at the DESY-II testbeam facility. In this paper we describe the setup developed to test the ZEUS MVD sensors and the results obtained on both irradiated and non-irradiated single sided micro-strip detectors with rectangular and trapezoidal geometries. The performances of the sensors coupled to the readout electronics (HELIX chip, version 2.2) have been studied in detail, achieving a good description by a Monte Carlo simulation. Measurements of the position resolution as a function of the angle of incidence are presented, focusing in particular on the comparison between standard and newly developed reconstruction algorithms.Comment: 41 pages, 21 figures, 2 tables, accepted for publication in NIM

Binary black hole merger in the extreme mass ratio limit

We discuss the transition from quasi-circular inspiral to plunge of a system of two nonrotating black holes of masses $m_1$ and $m_2$ in the extreme mass ratio limit $m_1m_2\ll (m_1+m_2)^2$. In the spirit of the Effective One Body (EOB) approach to the general relativistic dynamics of binary systems, the dynamics of the two black hole system is represented in terms of an effective particle of mass $\mu\equiv m_1m_2/(m_1+m_2)$ moving in a (quasi-)Schwarzschild background of mass $M\equiv m_1+m_2$ and submitted to an ${\cal O}(\mu)$ radiation reaction force defined by Pad\'e resumming high-order Post-Newtonian results. We then complete this approach by numerically computing, \`a la Regge-Wheeler-Zerilli, the gravitational radiation emitted by such a particle. Several tests of the numerical procedure are presented. We focus on gravitational waveforms and the related energy and angular momentum losses. We view this work as a contribution to the matching between analytical and numerical methods within an EOB-type framework.Comment: 14 pages, six figures. Revised version. To appear in the CQG special issue based around New Frontiers in Numerical Relativity conference, Golm (Germany), July 17-21 200

Are moving punctures equivalent to moving black holes?

When simulating the inspiral and coalescence of a binary black-hole system, special care needs to be taken in handling the singularities. Two main techniques are used in numerical-relativity simulations: A first and more traditional one ``excises'' a spatial neighbourhood of the singularity from the numerical grid on each spacelike hypersurface. A second and more recent one, instead, begins with a ``puncture'' solution and then evolves the full 3-metric, including the singular point. In the continuum limit, excision is justified by the light-cone structure of the Einstein equations and, in practice, can give accurate numerical solutions when suitable discretizations are used. However, because the field variables are non-differentiable at the puncture, there is no proof that the moving-punctures technique is correct, particularly in the discrete case. To investigate this question we use both techniques to evolve a binary system of equal-mass non-spinning black holes. We compare the evolution of two curvature 4-scalars with proper time along the invariantly-defined worldline midway between the two black holes, using Richardson extrapolation to reduce the influence of finite-difference truncation errors. We find that the excision and moving-punctures evolutions produce the same invariants along that worldline, and thus the same spacetimes throughout that worldline's causal past. This provides convincing evidence that moving-punctures are indeed equivalent to moving black holes.Comment: 4 pages, 3 eps color figures; v2 = major revisions to introduction & conclusions based on referee comments, but no change in analysis or result

Towards absorbing outer boundaries in General Relativity

We construct exact solutions to the Bianchi equations on a flat spacetime background. When the constraints are satisfied, these solutions represent in- and outgoing linearized gravitational radiation. We then consider the Bianchi equations on a subset of flat spacetime of the form [0,T] x B_R, where B_R is a ball of radius R, and analyze different kinds of boundary conditions on \partial B_R. Our main results are: i) We give an explicit analytic example showing that boundary conditions obtained from freezing the incoming characteristic fields to their initial values are not compatible with the constraints. ii) With the help of the exact solutions constructed, we determine the amount of artificial reflection of gravitational radiation from constraint-preserving boundary conditions which freeze the Weyl scalar Psi_0 to its initial value. For monochromatic radiation with wave number k and arbitrary angular momentum number l >= 2, the amount of reflection decays as 1/(kR)^4 for large kR. iii) For each L >= 2, we construct new local constraint-preserving boundary conditions which perfectly absorb linearized radiation with l <= L. (iv) We generalize our analysis to a weakly curved background of mass M, and compute first order corrections in M/R to the reflection coefficients for quadrupolar odd-parity radiation. For our new boundary condition with L=2, the reflection coefficient is smaller than the one for the freezing Psi_0 boundary condition by a factor of M/R for kR > 1.04. Implications of these results for numerical simulations of binary black holes on finite domains are discussed.Comment: minor revisions, 30 pages, 6 figure

A Tapestry Of Educational Technology Women Leaders In Higher Education: A Qualitative Study

A qualitative study was used to understand the experiences of 12 women, leaders in Education Technology in higher education. Through interviews, women leaders described their environment as well as personal and behavioral aspects of their work. Findings revealed four threads of descriptive concepts including relationships, leadership, persistence, and advice. Relationships were from workplaces and professional networks. Leadership was defined by vision and teamwork. Persistence was addressed as either values-based or relationship-based. The fourth thread in the findings, advice, was divided into three sub-threads: education, family (both personal and work), and managing emotions. A qualitative approach was used to highlight interview responses to demonstrate the experiences of women leaders in Education Technology in Higher Education

Velocity-space sensitivity of the time-of-flight neutron spectrometer at JET

The velocity-space sensitivities of fast-ion diagnostics are often described by so-called weight functions. Recently, we formulated weight functions showing the velocity-space sensitivity of the often dominant beam-target part of neutron energy spectra. These weight functions for neutron emission spectrometry (NES) are independent of the particular NES diagnostic. Here we apply these NES weight functions to the time-of-flight spectrometer TOFOR at JET. By taking the instrumental response function of TOFOR into account, we calculate time-of-flight NES weight functions that enable us to directly determine the velocity-space sensitivity of a given part of a measured time-of-flight spectrum from TOFOR

Relationship of edge localized mode burst times with divertor flux loop signal phase in JET

A phase relationship is identified between sequential edge localized modes (ELMs) occurrence times in a set of H-mode tokamak plasmas to the voltage measured in full flux azimuthal loops in the divertor region. We focus on plasmas in the Joint European Torus where a steady H-mode is sustained over several seconds, during which ELMs are observed in the Be II emission at the divertor. The ELMs analysed arise from intrinsic ELMing, in that there is no deliberate intent to control the ELMing process by external means. We use ELM timings derived from the Be II signal to perform direct time domain analysis of the full flux loop VLD2 and VLD3 signals, which provide a high cadence global measurement proportional to the voltage induced by changes in poloidal magnetic flux. Specifically, we examine how the time interval between pairs of successive ELMs is linked to the time-evolving phase of the full flux loop signals. Each ELM produces a clear early pulse in the full flux loop signals, whose peak time is used to condition our analysis. The arrival time of the following ELM, relative to this pulse, is found to fall into one of two categories: (i) prompt ELMs, which are directly paced by the initial response seen in the flux loop signals; and (ii) all other ELMs, which occur after the initial response of the full flux loop signals has decayed in amplitude. The times at which ELMs in category (ii) occur, relative to the first ELM of the pair, are clustered at times when the instantaneous phase of the full flux loop signal is close to its value at the time of the first ELM

Using computer simulation to aid the research of drilling processes

Drilling wells is one of the primary methods used for mineral exploration. Scientific studies have aimed at improving the technical and economic aspects of drilling because of the current competitive economic conditions. Note that the primary topic of these studies has been developing new effective rock-cutting tools. To design a new rock-cutting tool, a thorough, reliable, and accurate study of the processes that occur during drilling is necessary. During drilling, mechanical, hydraulic, thermal, and chemical phenomena, which are interdependent and affect the performance of a drilling tool, simultaneously occur; therefore, a systematic, integrated approach is required for studying drilling processes. Field-based and laboratory experiments are quite tedious to perform and require high material costs, and it is often not possible to separately evaluate small elements of the drilling model. Therefore, computer simulation is an important research tool that enables accurate and reliable visualization of even small parts of the model. The aim. The aim of this study is to examine the potential for computer simulation of the processes that occur during drilling. Objective. In this study, we evaluated the simulation features of various software products, such as KOMPAS-3D, ANSYS, Delphi, and LabVIEW, for their utility in studying the processes that occur during drilling. The possibility of computer simulation for studying drilling processes, including its advantages and disadvantages, are demonstrated. The results are obtained from a model that simulates a rock cutting tool. The main uses of the rock cutting tool are outlined, and the drilling simulation development is planned. Choice of research method. The study of the capabilities of existing modern software products, for use in drilling process research, is carried out by an analytical review method