Porosity and size gradation of saturated gravel with percolated fines

This is the accepted version of the following article: [Núñez-González, F., Martín-Vide, J. P., Kleinhans, M. G. (2016), Porosity and size gradation of saturated gravel with percolated fines. Sedimentology, 63: 1209–1232. doi: 10.1111/sed.12257], which has been published in final form at http://onlinelibrary.wiley.com/doi/10.1111/sed.12257/abstractFine particles may infiltrate through coarse alluvial beds and eventually saturate the subsurface pore space. It is essential to understand the conditions that lead to bed saturation, and to forecast the packing characteristics of saturated beds to assess the effect of excess fine sediment supply on a number of processes that occur in the stream-sediment boundary. To address this problem, in this study, a new method is introduced to predict the grain-size distribution for the saturated condition, and the resulting porosity decrease, given the characteristics of the bed and the supplied sediments. The new method consists of the numerical aggregation of infilling fines in a finite bed volume, during which the bed properties change to affect further infilling. An existing semi-empirical, particle packing model is implemented to identify these properties. It is shown that these types of models are adequate to describe regimes of natural sediment fabric quantitatively, and are thus useful tools in the analysis of sediment infiltration processes. Unlike previous developments to quantify saturated bed conditions, which assume that the supplied material is uniform and finer than the bed pore openings, the method developed herein considers poorly sorted fines, and can identify size fractions that are able to ingress into the bed due to being smaller than the particles that form the bed structure. Application of the new method to published experimental data showed that the final content of infiltrated fines is strongly sensitive to the initial bed packing density, highlighting the need to measure and understand open-work gravel deposits. In addition, the new method was shown to be suitable for assessing the degree of bed saturation, when it was applied to a published data set of field samples.Peer ReviewedPostprint (author's final draft

Experiments on sedimentation in wide reservoirs and erosion following dam removal

River morphodynamics and sediment transportSedimentation in reservoir

The effect of sea‐level rise on estuary filling in scaled landscape experiments

When sea-level rise slowed down in the middle Holocene, fluvial and coastal sediments filled the newly created accommodation, whilst others remained largely unfilled because of limited sediment supply. In view of current and future rapid sea-level rise, the question arises how estuarine systems will adapt and whether the land-level rise may keep up. Besides geological data and conceptual models of large-scale and long-term estuary filling, little is known about the filling process during sea-level rise on the decadal-to-centennial time scale that is relevant for society. This study focusses on how sea-level rise affects the morphological and hydrodynamic development of filling estuaries. To this end, scaled laboratory experiments were conducted in a tilting flume facility that creates bidirectional tidal currents and develops entire estuaries. A net importing estuary with sand, mud and vegetation was formed that was subjected to linear sea-level rise. Findings show less of the imported sand was deposited landward following sea-level rise than in an experiment without sea-level rise. The bay-head delta and the flood-tidal delta retained nearly enough sediment to keep up with sea-level rise, whilst the tidal embayment in between drowned except for the highest vegetated bars. Sea-level rise also reduced vegetation survival and sprouting potential, as prolonged inundation increased mortality, negating the potential eco-engineering effect. This resulted in lower vegetation coverage with sea-level rise than under constant sea level. These findings suggest that sea-level rise may cause natural systems to drown even if nearly sufficient sediment is available to fill the newly created accommodation, particularly in areas further away from the fluvial and marine sediment sources. Finally, depending on the sea-level rise rate, the flood-tidal delta may show back-stepping like fluvial deltas, but in the reverse direction towards the sea

Scour holes and ripples occur below the hydraulic smooth to rough transition of movable beds

© 2017 The Authors. Scour holes often form in shallow flows over sand on the beach and in morphodynamic scale experiments of river reaches, deltas and estuarine landscapes. The scour holes are on average 2cm deep and 5cm long, regardless of the flow depth and appear to occur under similar conditions as current ripples: at low boundary Reynolds numbers, in fine sand and under relatively low sediment mobility. In landscape experiments, where the flow is only about 1cm deep, such scours may be unrealistically large and have unnatural effects on channel formation, bar pattern and stratigraphy. This study tests the hypotheses that both scours and ripples occur in the same conditions and that the roughness added by sediment saltation explains the difference between the ripple–dune transition and the clear-water hydraulic smooth to rough transition. About 500 experiments are presented with a range of sediment types, sediment mobility and obstructions to provoke scour holes, or removal thereof to assess scour hole persistence. Most experiments confirm that ripples and scour holes both form in the ripple stability field in two different bedform stability diagrams. The experiments also show that scours can be provoked by perturbations even below generalized sediment motion. Moreover, the hydraulic smooth to rough transition modified with saltation roughness depending on sediment mobility was similar in magnitude and in slope to ripple–dune transitions. Given uncertainties in saltation relations, the smooth to rough transitions modified for movable beds are empirically equivalent to the ripple–dune transitions. These results are in agreement with the hypothesis that scours form by turbulence caused by localized flow separation under low boundary Reynolds numbers, and do not form under generalized flow separation over coarser particles and intense sediment saltation. Furthermore, this suggests that ripples are a superposition of two independent forms: periodic bedforms occurring in smooth and rough conditions plus aperiodic scours occurring only in hydraulic smooth conditions

MODEX: Laboratory experiment exploring sediment spreading of a mound under waves and currents

The dispersal of sand from submerged mounds in the nearshore is driven by the interplay of processes such as converging and recirculating flows, changing roughness, bed slope effects and wave focusing/refraction. This morphological diffusivity is key to understanding sand bars in shallow seas, tidal inlets, estuaries, and the nearshore response to human interventions such as nourishments and dredging. Most of the work on the evolution of submerged mounds has been based on fluvial studies, focusing on flow without waves. In these cases, circular mounds tend to deform to crescentic (barchan) shapes. In contrast, observations of sandbars and berms in the nearshore subjected to waves show much more complex translation and deformation behavior. This contribution introduces the laboratory MOrphological Diffusivity Experiment (MODEX) aimed at examining morphological diffusivity under different forcing conditions. The experiment particularly addresses the linkages between small scale (local) effects (e.g. bed slope, bedforms) on the adjustment of sandy mounds.Peer ReviewedPostprint (published version

Porosity and size gradation of saturated gravel with percolated fines

Fine particles may infiltrate through coarse alluvial beds and eventually saturate the subsurface pore space. It is essential to understand the conditions that lead to bed saturation, and to forecast the packing characteristics of saturated beds to assess the effect of excess fine sediment supply on a number of processes that occur in the stream-sediment boundary. To address this problem, in this study, a new method is introduced to predict the grain-size distribution for the saturated condition, and the resulting porosity decrease, given the characteristics of the bed and the supplied sediments. The new method consists of the numerical aggregation of infilling fines in a finite bed volume, during which the bed properties change to affect further infilling. An existing semi-empirical, particle packing model is implemented to identify these properties. It is shown that these types of models are adequate to describe regimes of natural sediment fabric quantitatively, and are thus useful tools in the analysis of sediment infiltration processes. Unlike previous developments to quantify saturated bed conditions, which assume that the supplied material is uniform and finer than the bed pore openings, the method developed herein considers poorly sorted fines, and can identify size fractions that are able to ingress into the bed due to being smaller than the particles that form the bed structure. Application of the new method to published experimental data showed that the final content of infiltrated fines is strongly sensitive to the initial bed packing density, highlighting the need to measure and understand open-work gravel deposits. In addition, the new method was shown to be suitable for assessing the degree of bed saturation, when it was applied to a published data set of field samples

Near-bed and surface flow division patterns in experimental river bifurcations

Understanding channel bifurcation mechanics is of great importance for predicting and managing multichannel river processes and avulsion in distributary river deltas. To date, research on river channel bifurcations has focused on factors determining the stability and evolution of bifurcations. It has recently been shown that, theoretically, the nonlinearity of the relation between sediment transport and flow discharge causes one of the two distributaries of a (slightly) asymmetrical bifurcation to grow and the other to shrink. The positive feedback introduced by this effect results in highly asymmetrical bifurcations. However, there is a lack of detailed insight into flow dynamics within river bifurcations, the consequent effect on bed load flux through bifurcating channels, and thus the impact on bifurcation stability over time. In this paper, three key parameters (discharge ratio, width-to-depth ratio, and bed roughness) were varied in order to examine the secondary flow field and its effect on flow partitioning, particularly near-bed and surface flow, at an experimental bifurcation. Discharge ratio was controlled by varying downstream water levels. Flow fields were quantified using both particle image velocimetry and ultrasonic Doppler velocity profiling. Results show that a bifurcation induces secondary flow cells upstream of the bifurcation. In the case of unequal discharge ratio, a strong increase in the secondary flow near the bed causes a larger volume of near-bed flow to enter the dominant channel compared to surface and depth-averaged flow. However, this effect diminishes with larger width-to-depth ratio and with increased bed roughness. The flow structure and division pattern will likely have a stabilizing effect on river channel bifurcations. The magnitude of this effect in relation to previously identified destabilizing effects is addressed by proposing an adjustment to a widely used empirical bed load nodal-point partition equation. Our finding implies that river bifurcations can be stable under a wider range of conditions than previously thought. Key Points Secondary flow in symmetrical bifurcations causes strong near-bed flow curvature A disproportional amount of near-bed flow enters the dominant downstream channel Flow curvature adds a stabilizing feedback on bifurcation evolution

Effects of estuarine mudflat formation on tidal prism and large-scale morphology in experiments

Human interference in estuaries has led to increasing problems of mud, such as hyper-turbidity with adverse ecological effects and siltation of navigation channels and harbours. To deal with this mud sustainably, it is important to understand its long-term effects on the morphology and dynamics of estuaries. The aim of this study is to understand how mud affects the morphological evolution of estuaries. We focus on the effects of fluvial mud supply on the spatial distribution of mudflats and on how this influences estuary width, depth, surface area and dynamics over time. Three physical experiments with self-forming channels and shoals were conducted in a new flume type suitable for tidal experiments: the Metronome. In two of the experiments, we added nutshell grains as mud simulant, which is transported in suspension. Time-lapse images of every tidal cycle and digital elevation models for every 500 cycles were analysed for the three experiments. Mud settles in distinct locations, forming mudflats on bars and sides of the estuary, where the bed elevation is higher. Two important effects of mud were observed: the first is the slight cohesiveness of mud that causes stability on bars limiting vertical erosion, although the bank erosion rate by migrating channels is unaffected. Secondly, mud fills inactive areas and deposits at higher elevations up to the high-water level and therefore decreases the tidal prism. These combined effects cause a decrease in dynamics in the estuary and lead to near-equilibrium planforms that are smaller in volume and especially narrower upstream, with increased bar heights and no channel deepening. This trend is in contrast to channel deepening in rivers by muddier floodplain formation. These results imply large consequences for long-term morphodynamics in estuaries that become muddier due to management practices, which deteriorate ecological quality of intertidal habitats but may create potential area for marshes