Optimizing tuning masses for helicopter rotor blade vibration reduction including computed airloads and comparison with test data

The development and validation of an optimization procedure to systematically place tuning masses along a rotor blade span to minimize vibratory loads are described. The masses and their corresponding locations are the design variables that are manipulated to reduce the harmonics of hub shear for a four-bladed rotor system without adding a large mass penalty. The procedure incorporates a comprehensive helicopter analysis to calculate the airloads. Predicting changes in airloads due to changes in design variables is an important feature of this research. The procedure was applied to a one-sixth, Mach-scaled rotor blade model to place three masses and then again to place six masses. In both cases the added mass was able to achieve significant reductions in the hub shear. In addition, the procedure was applied to place a single mass of fixed value on a blade model to reduce the hub shear for three flight conditions. The analytical results were compared to experimental data from a wind tunnel test performed in the Langley Transonic Dynamics Tunnel. The correlation of the mass location was good and the trend of the mass location with respect to flight speed was predicted fairly well. However, it was noted that the analysis was not entirely successful at predicting the absolute magnitudes of the fixed system loads

Muscle damage response in female collegiate athletes following repeated sprint activity

Exercise induced muscle damage (EIMD) is a well-investigated area, however there is a paucity of data surrounding the damage response in females. The aim of this study was to examine the damage responses from a sport-specific bout of repeated sprints in female athletes. Eleven well-trained females (mean ± SD; age 22 ± 3 y, height 166.6 ± 5.7 cm, mass 62.7 ± 4.5 kg) in the luteal phase of the menstrual cycle completed a repeated sprint protocol designed to induce EIMD (15 × 30 m sprints). Creatine kinase (CK), countermovement jump height (CMJ), knee extensor maximum voluntary contraction force (MVIC), muscle soreness (DOMS), 30 m sprint time and limb girth were recorded pre, post, 24 h, 48 h and 72 h post exercise. CK was elevated at 24, 48 and 72 h (p < 0.05), peaking at 24 h (+418%) and returning towards baseline at 72 h. CMJ height was reduced immediately post, 24 and 48 h (p < 0.05). Sprint performance was also negatively affected immediately post, 24 h, 48 h and 72 h post exercise. Muscle soreness peaked at 48 h (p<0.01) and remained significantly elevated at 72 h post exercise (p<0.01). Limb girth and MVIC did not alter over time. The current study provides new information on the EIMD response in trained females following a sport specific bout of repeated sprints. Importantly, this damage response has the potential to negatively affect performance for several days post-exercise

'Black diamonds', 'clever blacks' and other metaphors: Constructing the black middle class in contemporary South African print media

South Africa (SA) has been undergoing a process of transformation since the end of White minority rule (apartheid) in 1994. During this period, various employment and lifestyle opportunities have given rise to a growing Black middle class (BMC). Against this backdrop, the article draws upon an intersectional approach to corpus-assisted discourse studies in order to examine the construction of the BMC in a 1.4 million-word corpus composed of 20 mainstream Anglophone South African newspaper titles published between 2008 and 2014. With the help of the corpus tool AntConc, the article investigates the collocates of ‘black middle class’, ‘black diamonds’, ‘clever blacks’ and ‘coconuts’, classifying results according to semantic categories in order to provide an idea of the multiple but nuanced representations of the BMC in contemporary SA. The analysis finds several lexically rich moralizing and paternalistic discourses that, in accordance with an intersectional perspective, enact a complex pattern of strategies that are simultaneously exclusionary and inclusionary

Quantitative analysis of time-resolved infrared stimulated luminescence in feldspars

Time-resolved infrared-stimulated luminescence (TR-IRSL) from feldspar samples is of importance in the field of luminescence dating, since it provides information on the luminescence mechanism in these materials. In this paper we present new analytical equations which can be used to analyze TR-IRSL signals, both during and after short infrared stimulation pulses. The equations are developed using a recently proposed kinetic model, which describes localized electronic recombination via tunneling between trapped electrons and recombination centers in luminescent materials. Recombination is assumed to take place from the excited state of the trapped electron to the nearest-neighbor center within a random distribution of luminescence recombination centers. Different possibilities are examined within the model, depending on the relative importance of electron de-excitation and recombination. The equations are applied to experimental TR-IRSL data of natural feldspars, and good agreement is found between experimental and modeling results

Removal of organic matter from reservoir water: mechanisms underpinning surface chemistry of natural adsorbents

One of the key challenges in water treatment industry is the removal of organic compounds by cost-effective methods. This study evaluated the adsorptive removal of dissolved organic carbon (DOC) from reservoir water using fuller’s earth (FE) in comparison with natural (SQ) and modified quartz (MSQ) sands. The removal capacities of FE at different contact times, pH levels, adsorbent dosages and initial DOC concentrations were compared with both the quartz sands. The optimum DOC removals by FE and SQs were achieved at contact time of 60 and 30 min, pH level of 6 and 4, and at adsorbent dose of 1.5 g/150 mL and 10 g/100 mL, respectively. The adsorption capacity of FE (1.05 mg/g) was much higher compared to the MSQ (0.04 mg/g) and SQ (0.01 mg/g). Adsorption equilibrium data better fitted to the Freundlich model than to the Langmuir model, suggesting that adsorption occurred primarily through multilayer formation onto the surfaces of FE and SQ. The pseudo-second-order model described the uptake kinetics more effectively than the pseudo-first-order and intra-particle diffusion models, indicating that the mechanism was primarily governed by chemisorption. These observations were well supported by the physiochemical characteristics and charge behaviour of the adsorbents. In mass-transfer study, the results of liquid film diffusion model showed that the adsorption of DOC on FE was not controlled by film diffusion, but other mechanisms also played an essential role. This study demonstrates that FE is an effective adsorbent for the removal of DOC in surface water treatment