What´s floating on my plasma?

We report on a preanalytical issue we encountered during routine clinical chemistry analyses, potentially leading to deviated analysis results and believe that it might help other laboratories to overcome similar problems. In a heparin-gel tube we measured an implausible glucose value of 0.06 mmol/L. Re-measurement of the same sample resulted in a glucose value of 5.4 mmol/L. After excluding an analytical error, we inspected the sample closer and found a white material as well as fatty droplets floating on the surface of the plasma tube. Evaluation of these structures revealed that the white particulate matter (WPM) consisted of fibrinogen, platelets and leukocytes and the fatty droplets most probably originated from the separator gel. We concluded that these structures formed a temporary clot in the instruments pipetting needle thereby altering the sampling volume and subsequently the measured glucose value. The formation of WPM might be attributable to high speed centrifugation, high cholesterol levels, the gel formulation or a combination of several issues such as temperature, heparin concentration, pH and patient-specific factors. The gel droplets were most probably caused by an aberrant gel formulation in combination with an improper storage of the empty tubes on the wards prior to phlebotomy. After adding an additional instrument cleansing cycle and changing to another batch of heparin tubes the problems could be significantly reduced

In-vitro hemolysis and its financial impact using different blood collection systems

Background: Hemolytic specimens are among the most challenging preanalytical issues in laboratory diagnostics. The type of blood collection tube in use is claimed to influence in vitro hemolysis. We aimed to examine this hypothesis and estimate the respective financial impact, evaluating routine blood samples from the past 4 years. Methods: A total of 47,820 hemolysis index (HI) values from five different time intervals (IV1-IV5) were compared against each other, representing the following tubes: IV1-Sarstedt Monovette; IV2-8 mL/16×100 mm Greiner BioOne (GBO) Vacuette; IV3/IV4-5 mL/16×100 mm GBO Vacuette; IV5-4.5 mL/13×75 mm GBO Vacuette. For estimation of the economic impact, material, personnel and analytical costs were calculated. Results: HI mean values in time interval IV2 were significantly higher than in all other intervals, while mean values amongst all other intervals were comparable. The number of moderately and severely hemolyzed samples increased with incrementing vacuum. Overall comparable costs between intervals IV1 and IV5 were €11,370, €14,045, €12,710, €11,213 and €8138 per 10,000 samples, respectively. Conclusions: Aspiration tubes and low vacuum tubes show comparable hemolysis rates. Increasing vacuum levels are associated with higher hemolysis rates. By decreasing in vitro hemolysis, financial savings up to €5907 per 10,000 samples could be gained

Influences of reasoning and achievement motivation on complex problem solving in a new microworld operationalization

Complex Problem Solving (CPS) can be defined as those psychological processes that enable a person to achieve goals under complex conditions, which are characterized by their complexity, connectivity, dynamics, lack of transparency, and polytely. Although many hypothesized influences have previously been tested concerning their relevance for the process of solving complex problems (e.g., general intelligence), results were often found to be rather heterogeneous. As this was found to be partially caused by fundamental differences between measurements of CPS, a new operationalization was used in the present study: Following the Microworld approach, CPS was assessed in the simulation game Cities: Skylines, as its aptitude as a Microworld could be justified from a theoretical perspective. A parameter for CPS performance was defined to investigate the following hypotheses: Both reasoning and achievement motivation were expected to be positively correlated to CPS performance. Furthermore, a gender difference favoring male participants was expected. Participants in the present study (N = 27) first provided demographic information, then subsequently completed a short test of reasoning and an objective personality test of achievement motivation, and finally were given a mission in a complex scenario implemented in Cities: Skylines. The results supported all three hypotheses, indicating significant small to moderate positive relationships of both reasoning and achievement motivation with CPS performance, and a significant gender difference favoring male participants in CPS performance. Furthermore, significant gender differences favoring males were also found for reasoning and achievement motivation. Results are discussed and the Microworld operationalization is evaluated

Personality traits and complex problem solving: Personality disorders and their effects on complex problem-solving ability

Complex problem solving (CPS) can be interpreted as the number of psychological mechanisms that allow us to reach our targets in difficult situations, that can be classified as complex, dynamic, non-transparent, interconnected, and multilayered, and also polytelic. The previous results demonstrated associations between the personality dimensions neuroticism, conscientiousness, and extraversion and problem-solving performance. However, there are no studies dealing with personality disorders in connection with CPS skills. Therefore, the current study examines a clinical sample consisting of people with personality and/or depressive disorders. As we have data for all the potential personality disorders and also data from each patient regarding to potential depression, we meet the whole range from healthy to impaired for each personality disorder and for depression. We make use of a unique operationalization: CPS was surveyed in a simulation game, making use of the microworld approach. This study was designed to investigate the hypothesis that personality traits are related to CPS performance. Results show that schizotypal, histrionic, dependent, and depressive persons are less likely to successfully solve problems, while persons having the additional behavioral characteristics of resilience, action orientation, and motivation for creation are more likely to successfully solve complex problems

Dual inhibition of thrombin and activated factor X attenuates disseminated intravascular coagulation and protects organ function in a baboon model of severe Gram-negative sepsis

BACKGROUND: Inhibition of procoagulant pathways may improve outcome in sepsis. We examined whether a dual short-acting thrombin (factor II) and factor X (FX)a inhibitor (SATI) ameliorates sepsis-induced disseminated intravascular coagulation (DIC) and is organ-protective. METHODS: Escherichia coli were infused for 2 h in 22 anesthetized baboons. The control (CO) group (n = 8) received sterile isotonic solution only. In the treatment groups, SATI was administered starting 15 minutes after the end of the bacterial exposure. In the low-dose group (LD-SATI, n = 8), SATI was infused with 75 μg/kg/h for the first hour, followed by 23 μg/kg/h until the end of the study. In the high-dose SATI group (HD-SATI, n = 6), 225 μg/kg/h was administered for the first hour followed by continuous infusion of 69 μg/kg/h until termination of the study. RESULTS: Sepsis-induced DIC was attenuated, as reflected by lower peak thrombin-antithrombin complexes (threefold) and D-dimer levels (twofold) in both SATI groups compared to the CO. This coincided with strongly improved cell/organ protection assessed by decreased levels of lactate dehydrogenase (threefold), creatinine (twofold), aspartate aminotransferase (threefold), and amylase (twofold) compared to the CO group. Anuria, which started at 8 h in the CO group, was prevented in both SATI groups. Peak interleukin-6 release at 12 h was prevented in the treatment groups. In both SATI groups, fewer catecholamines were necessary and no bleeding complications were observed. CONCLUSIONS: Dual inhibition of thrombin and FXa preserved activation of coagulation, protected organ function and ameliorated inflammation in severe Gram-negative sepsis in baboons. SATI could be a novel therapeutic agent against sepsis-induced DIC

Influence of centrifugation conditions on the results of 77 routine clinical chemistry analytes using standard vacuum blood collection tubes and the new BD-Barricor tubes

Introduction: Although centrifugation is performed in almost every blood sample, recommendations on duration and g-force are heterogeneo-us and mostly based on expert opinions. In order to unify this step in a fully automated laboratory, we aimed to evaluate different centrifugation settings and their influence on the results of routine clinical chemistry analytes. Materials and methods: We collected blood from 41 healthy volunteers into BD Vacutainer PST II-heparin-gel- (LiHepGel), BD Vacutainer SST II-serum-, and BD Vacutainer Barricor heparin-tubes with a mechanical separator (LiHepBar). Tubes were centrifuged at 2000xg for 10 minutes and 3000xg for 7 and 5 minutes, respectively. Subsequently 60 and 21 clinical chemistry analytes were measured in plasma and serum samples, respec-tively, using a Roche COBAS instrument. Results: High sensitive Troponin T, pregnancy-associated plasma protein A, ß human chorionic gonadotropin and rheumatoid factor had to be excluded from statistical evaluation as many of the respective results were below the measuring range. Except of free haemoglobin (fHb) measure-ments, no analyte result was altered by the use of shorter centrifugation times at higher g-forces. Comparing LiHepBar to LiHepGel tubes at different centrifugation setting, we found higher lactate-dehydrogenase (LD) (P = 0.003 to < 0.001) and lower bicarbonate values (P = 0.049 to 0.008) in the lat ter. Conclusions: Serum and heparin samples may be centrifuged at higher speed (3000xg) for a shorter amount of time (5 minutes) without alteration of the analytes tested in this study. When using LiHepBar tubes for blood collection, a separate LD reference value might be needed

Are laboratory tests always needed? Frequency and causes of laboratory overuse in a hospital setting

BACKGROUND: Inappropriate utilization of laboratory resources is an increasing concern especially in high-throughput facilities. Until now, no reliable information has been published addressing to which extent laboratory results are actually used for clinical decision-making. Therefore, we aimed to close this gap using a novel retrospective approach including a survey of clinicians and nurses. METHODS: We retrospectively evaluated the number of re-orders for potassium (K), lactate dehydrogenase (LD), aspartate-aminotransferase (AST), activated partial thromboplastin-time (APTT) and prothrombin-time/INR (PT/INR), after the initial order had to be cancelled due to preanalytical non-conformities. We analyzed subgroups regarding time to re-order, ward and sample priority (urgent vs. routine). Subsequently, we surveyed clinicians and nurses, asking for their estimate of the amount of failed re-orders as well as for possible reasons. RESULTS: From initially cancelled tests, only ~20% of K, LD, AST and ~30% of APTT and PT/INR tests were re-ordered within 24\u202fh. 70% of the investigated clinical chemistry and 60% of coagulation tests were re-ordered one week after cancellation or not at all. Survey participants quite accurately estimated these numbers. Routine laboratory panels, short stay of out-patients, obsolete test results and avoiding additional phlebotomies were the main reasons for not re-ordering cancelled tests. CONCLUSIONS: Overall, 60-70% of test results in the investigated assays ordered in a high throughput laboratory are potentially inappropriate or of doubtful clinically importance. Although clinicians and nurses are aware of this situation, it is the duty of laboratory specialists to overcome overutilization in close collaboration with all involved healthcare workers