Capacitor-type micrometeoroid detectors

The metal oxide semiconductor (MOS) capacitor micrometeroid detector consists of a thin dielectric capacitor fabricated on a silicon wafer. In operation, the device is charged to a voltage level sufficiently near breakdown that micrometeoroid impacts will cause dielectric deformation or heating and subsequent arc-over at the point of impact. Each detector is capable of recording multiple impacts because of the self-healing characteristics of the device. Support instrumentation requirements consist of a voltage source and pulse counters that monitor the pulse of recharging current following every impact. An investigation has been conducted in which 0.5 to 5 micron diameter carbonized iron spheres traveling at velocities of 4 to 10 Km/sec were impacted on to detectors with either a dielectric thickness of 0.4 or 1.0 micron. This study demonstrated that an ion microprobe tuned to sufficiently high resolution can detect Fe remaining on the detector after the impact. Furthermore, it is also possible to resolve Fe ion images free of mass interferences from Si, for example, giving its spatial distribution after impact. Specifically this technique has shown that significant amounts of impacting particles remain in the crater and near it which can be analyzed for isotopic content. Further testing and calibration could lead to quantitive analysis. This study has shown that the capacitor type micrometeroid detector is capable of not only time and flux measurements but can also be used for isotopic analysis

Particulate and aerosol detector

A device is described for counting aerosols and sorting them according to either size, mass or energy. The component parts are an accelerator, a capacitor sensor and a readout. The accelerator is a means for accelerating the aerosols toward the face of the capacitor sensor with such force that they partially penetrate the capacitor sensor, momentarily discharging it. The readout device is a means for counting the number of discharges of the capacitor sensor and measuring the amplitudes of these different discharges. The aerosols are accelerated by the accelerator in the direction of the metal layer with such force that they penetrate the metal and damage the oxide layers, thereby allowing the electrical charge on the capacitor to discharge through the damaged region. Each incident aerosol initiates a discharge path through the capacitor in such a fashion as to vaporize the conducting path. Once the discharge action is complete, the low resistance path no longer exists between the two capacitor plates and the capacitor is again able to accept a charge. The active area of the capacitor is reduced in size by the damaged area each time a discharge occurs

CU Comae: a new field double-mode RR Lyrae, the most metal poor discovered to date

We report the discovery of a new double-mode RR Lyrae variable (RRd) in the field of our Galaxy: CU Comae. CU Comae is the sixth such RRd identified to date and is the most metal-poor RRd ever detected. Based on BVI CCD photometry spanning eleven years of observations, we find that CU Comae has periods P0=0.5441641 +/-0.0000049d and P1=0.4057605 +/-0.0000018d. The amplitude of the primary (first-overtone) period of CU Comae is about twice the amplitude of the secondary (fundamental) period. The combination of the fundamental period of pulsation P0 and the period ratio of P1/P0=0.7457 places the variable on the metal-poor side of the Petersen diagram, in the region occupied by M68 and M15 RRd's. A mass of 0.83 solar masses is estimated for CU Comae using an updated theoretical calibration of the Petersen diagram. High resolution spectroscopy (R=30,000) covering the full pulsation cycle of CU Comae was obtained with the 2.7 m telescope of the Mc Donald Observatory, and has been used to build up the radial velocity curve of the variable. Abundance analysis done on the four spectra taken near minimum light (phase: 0.54 -- 0.71) confirms the metal poor nature of CU Comae, for which we derive [Fe/H]=-2.38 +/-0.20. This value places this new RRd at the extreme metal-poor edge of the metallicity distribution of the RR Lyrae variables in our Galaxy.Comment: 21 pages including 8 Tables, Latex, 11 Figures. Accepted for publication in The Astronomical Journal, October 2000 issu

Structure and functional composition of macroinvertebrate communities in coastal plain streams across a precipitation gradient

Climate change is expected to alter rainfall and temperature regimes across the world. The hydrology and riparian zone vegetation of lotic ecosystems are tightly linked to rainfall and a mechanistic understanding of the effects of rainfall on lotic ecosystems is needed to forecast the ecological impacts of climate change. However, it is difficult to isolate rainfall effects from other environmental variables that covary across climates. To address this, we leveraged a unique steep rainfall gradient with few covarying changes in elevation, temperature, and geology to evaluate the effects of rainfall on stream invertebrate communities. We surveyed nine streams in the Texas Gulf Coast Prairie distributed along a 550–1,350 mm/year rainfall gradient. Four sites were classified as drier semi-arid streams (\u3c750 mm annual rainfall) and five sites were classified as wetter sub-humid streams (\u3e750 mm annual rainfall). A suite of characteristics including benthic invertebrate community metrics, flow conditions, and water quality variables were assessed monthly for 14 months at each site to relate precipitation regime to stream structure and function. Precipitation regime was observed to be a master explanatory variable. As annual rainfall increased, the flow environment became more stable within seasons and predictable across seasons, influencing spatial structure and temporal variability of invertebrate community composition. Wetter streams were dominated by slower growing taxa without adaptions for desiccation resistance and strong dispersal. Wetter sites displayed seasonal variation in community composition and species richness, whereas temporal variation in communities in drier streams was controlled by stochastic variation in flow conditions. These observations show that differences in local annual rainfall correlated with major changes to community structure and functional composition. We hypothesise that this association is related to the connection of rainfall to hydrological stability, particularly the frequency of low flow disturbances, and the subsequent effects on riparian vegetation and temporally available niches to stream invertebrates. Our work adds to evidence that alterations in precipitation patterns associated with climate change have sweeping impacts on lotic fauna

Osteochondral tissue regeneration through polymeric delivery of DNA encoding for the SOX trio and RUNX2

Native osteochondral repair is often inadequate owing to the inherent properties of the tissue, and current clinical repair strategies can result in healing with a limited lifespan and donor site morbidity. This work investigates the use of polymeric gene therapy to address this problem by delivering DNA encoding for transcription factors complexed with the branched poly(ethylenimine)–hyaluronic acid (bPEI–HA) delivery vector via a porous oligo[poly(ethylene glycol) fumarate] hydrogel scaffold. To evaluate the potential of this approach, a bilayered scaffold mimicking native osteochondral tissue organization was loaded with DNA/bPEI–HA complexes. Next, bilayered implants either unloaded or loaded in a spatial fashion with bPEI–HA and DNA encoding for either Runt-related transcription factor 2 (RUNX2) or SRY (sex determining region Y)-box 5, 6, and 9 (the SOX trio), to generate bone and cartilage tissues respectively, were fabricated and implanted in a rat osteochondral defect. At 6 weeks post-implantation, micro-computed tomography analysis and histological scoring were performed on the explants to evaluate the quality and quantity of tissue repair in each group. The incorporation of DNA encoding for RUNX2 in the bone layer of these scaffolds significantly increased bone growth. Additionally, a spatially loaded combination of RUNX2 and SOX trio DNA loading significantly improved healing relative to empty hydrogels or either factor alone. Finally, the results of this study suggest that subchondral bone formation is necessary for correct cartilage healing

Estimating Physical Activity and Sleep using the Combination of Movement and Heart Rate: A Systematic Review and Meta-Analysis

International Journal of Exercise Science 16(7): 1514-1539, 2023. The purpose of this meta-analysis was to quantify the difference in physical activity and sleep estimates assessed via 1) movement, 2) heart rate (HR), or 3) the combination of movement and HR (MOVE+HR) compared to criterion indicators of the outcomes. Searches in four electronic databases were executed September 21-24 of 2021. Weighted mean was calculated from standardized group-level estimates of mean percent error (MPE) and mean absolute percent error (MAPE) of the proxy signal compared to the criterion measurement method for physical activity, HR, or sleep. Standardized mean difference (SMD) effect sizes between the proxy and criterion estimates were calculated for each study across all outcomes, and meta-regression analyses were conducted. Two-One-Sided-Tests method were conducted to meta-analytically evaluate the equivalence of the proxy and criterion. Thirty-nine studies (physical activity k = 29 and sleep k = 10) were identified for data extraction. Sample size weighted means for MPE were -38.0%, 7.8%, -1.4%, and -0.6% for physical activity movement only, HR only, MOVE+HR, and sleep MOVE+HR, respectively. Sample size weighted means for MAPE were 41.4%, 32.6%, 13.3%, and 10.8% for physical activity movement only, HR only, MOVE+HR, and sleep MOVE+HR, respectively. Few estimates were statistically equivalent at a SMD of 0.8. Estimates of physical activity from MOVE+HR were not statistically significantly different from estimates based on movement or HR only. For sleep, included studies based their estimates solely on the combination of MOVE+HR, so it was impossible to determine if the combination produced significantly different estimates than either method alone

Late Positive Potential ERP Responses to Social and Nonsocial Stimuli in Youth with Autism Spectrum Disorder

We examined the late positive potential (LPP) event related potential in response to social and nonsocial stimuli from 9-19 years old youth with (n = 35) and without (n = 34) ASD. Social stimuli were faces with positive expressions and nonsocial stimuli were related to common restricted interests in ASD (e.g., electronics, vehicles, etc.). The ASD group demonstrated relatively smaller LPP amplitude to social stimuli and relatively larger LPP amplitude to nonsocial stimuli. There were no group differences in subjective ratings of images, and there were no significant correlations between LPP amplitude and ASD symptom severity within the ASD group. LPP results suggest blunted motivational responses to social stimuli and heightened motivational responses to nonsocial stimuli in youth with ASD

Dynamic clamp with StdpC software

Dynamic clamp is a powerful method that allows the introduction of artificial electrical components into target cells to simulate ionic conductances and synaptic inputs. This method is based on a fast cycle of measuring the membrane potential of a cell, calculating the current of a desired simulated component using an appropriate model and injecting this current into the cell. Here we present a dynamic clamp protocol using free, fully integrated, open-source software (StdpC, for spike timing-dependent plasticity clamp). Use of this protocol does not require specialist hardware, costly commercial software, experience in real-time operating systems or a strong programming background. The software enables the configuration and operation of a wide range of complex and fully automated dynamic clamp experiments through an intuitive and powerful interface with a minimal initial lead time of a few hours. After initial configuration, experimental results can be generated within minutes of establishing cell recording

Analysis of the noise-induced bursting-spiking transition in a pancreatic beta-cell model

A stochastic model of the electrophysiological behavior of the pancreatic β cell is studied, as a paradigmatic example of a bursting biological cell embedded in a noisy environment. The analysis is focused on the distortion that a growing noise causes to the basic properties of the membrane potential signals, such as their periodic or chaotic nature, and their bursting or spiking behavior. We present effective computational tools to obtain as much information as possible from these signals, and we suggest that the methods could be applied to real time series. Finally, a universal dependence of the main characteristics of the membrane potential on the size of the considered cell cluster is presented.This work has been supported by the Spanish Ministry of Science and Technology under Project Nos. BFM2000-0967 and BFM2003-03081 by a scholarship from the Spanish Ministry of Foreign Affaires (2001), and by Universidad Rey Juan Carlos under Project Nos. PGRAL-2001-02, PIGE-02-04, and GCO-2003–16. J.A. acknowledges support from the Danish Natural Science Foundation.Peer reviewe