Increase Microgrid's Consumer Comfort by Using Fuzzy and Optimization Algorithms

Whereas the most important fundamental factor for today’s human is energy and wasting energy leads to increasing costs and destruction of natural resources, it is attempted through using modern and electronic methods to optimize the energy consumption and preventing of wasting energy. According to technological advancements and level of knowledge of people and having different electronic means, it is applied from several methods including: wireless sensor networks at home automation, energy management system, BEMS system and intelligent electrical keys on building to respond the requirements of users that leads to comfort of users, reducing costs, optimization of energy consumption and prevention of wasting energy. In this article, it is benefit from intelligent control methods by using optimization algorithms (PSO & GA) and fuzzy logic for controlling energy of building in order to obtain the maximum welfare and comfort of inhabitants in a building using from new pneumatic and solar recyclable resources. In order to show this performance, it is benefit from simulation at MATLAB environment

Increasing Drying Rate of Alfalfa and Reducing Amounts of Crop Losses

Agricultural Engineerin

Demonstrating subsurface drip irrigation as a climate adaptation strategy for sustainable crop production in South Carolina

2014 S.C. Water Resources Conference - Informing Strategic Water Planning to Address Natural Resource, Community and Economic Challenge

Site-Specific Irrigation Management in Coastal Plain Soils

2008 S.C. Water Resources Conference - Addressing Water Challenges Facing the State and Regio

Sensor-Based Irrigation Scheduling in Cotton Production

2010 S.C. Water Resources Conferences - Science and Policy Challenges for a Sustainable Futur

Soil Moisture Mapping Utilizing Space-Based GPS Technology Developed by NASA

The ability to make more water available for domestic, agricultural, industrial and environmental uses will depend on better management of water resources, watersheds, and storm water runoff. To determine the quantity of runoff from a given watershed, several key pieces of information such as the soil moisture or antecedent moisture condition and surface storage must be accurately known. Recently NASA scientists have developed a new technique (modified GPS Delay Mapping Receiver -- DMR) which operates by recording the GPS signal reflected from the earth\u27s surface and can be used to estimate the surface reflectivity (dielectric properties) for estimating changes in surface soil moisture. The DMR tracks and measures both direct Right-Hand_Circularly Polarized (RHCP) GPS signal and reflected Left-Hand_Circularly Polarized (LHCP) GPS signal at 1.575 GHz frequency

Temporal Dynamics and Electronic Nose Detection of Stink Bug-Induced Volatile Emissions from Cotton Bolls

Management decisions for stink bugs (Pentatomidae) in Bt cotton are complicated by time-consuming sampling methods, and there is a need for more efficient detection tools. Volatile compounds are released from cotton bolls in response to feeding by stink bugs, and electronic nose (E-nose) technology may be useful for detecting boll damage. In this study, we investigated the temporal dynamics of volatile emissions in response to feeding by stink bugs and tested the ability of E-nose to discriminate between odors from healthy and injured bolls. Feeding by stink bugs led to an approximate 2.4-fold increase in volatile organic compound (VOC) emissions. Principal components analysis of E-nose sensor data showed distinct (100%) separation between stink bug-injured and healthy bolls after two days of feeding. However, when E-nose was used to randomly identify samples, results were less accurate (80–90%). These results suggest that E-nose is a promising technology for rapid detection of stink bug injury to cotton

Evaluating Reflected GPS Signal as a Potential Tool for Cotton Irrigation Scheduling

Accurate soil moisture content measurements are vital to precision irrigation management. Remote sensing using the microwave spectrum (such as GPS signals) has been used for measuring large area soil moisture contents. In our previous work, we estimated surface soil moisture contents for bare soil using a GPS Delay Mapping Receiver (DMR) developed by NASA. However, the effect of vegetation was not considered in these studies. Hence the objectives of this study were to: 1) investigate the feasibility of using DMR to determine soil moisture content in cotton production fields; 2) evaluate the attenuation effect of vegetation (cotton) on reflected GPS signal. Field experiments were conducted during the 2013 and 2014 growing seasons in South Carolina. GPS antennas were mounted at three heights (1.6, 2.7, and 4.2 m) over cotton fields to measure reflected GPS signals (DMR readings). DMR readings, soil core samples, and plant measurements were collected about once a week and attenuation effect of plant canopy was calculated. Results showed that DMR was able to detect soil moisture changes within one week after precipitation events that were larger than 25 mm per day. However, the DMR readings were poorly correlated with soil volumetric water content during dry periods. Attenuation effect of plant canopy was not significant. For irrigation purpose, the results suggested that the sensitivity of reflected GPS signals to soil moisture changes needed to be further studied before this technology could be utilized for irrigation scheduling in cotton production. Refinement of this technology will expand the use of advanced remote sensing technology for site-specific and timely irrigation scheduling. This would eliminate the need to install moisture sensors in production fields, which can interfere with farming operations and increase production costs

Relationship of Soil Moisture and Reflected GPS Signal Strength

Many agricultural fields across the country have a high degree of variability in soil type and water holding capacity that affects irrigation management. One way to overcome problems associated with the field variability for improving irrigation management is to utilize a site-specific irrigation system. This system applies water to match the needs of individual management zones within a field. A real-time continuous soil moisture measurement is essential for the success of site-specific irrigation systems. Recently the National Aeronautics and Space Administration (NASA) developed sensor technology that records the global positioning system (GPS) signal reflected from the surface of Earth, which estimates the dielectric properties of soil and can be used to estimate soil moisture contents. The overall objective of this study was to determine the feasibility of utilizing GPS-based technology developed by NASA for soil moisture measurements and to determine the influence of soil type, soil compaction, and ground cover on the measurements. The results showed strong positive correlations between soil moisture and reflected signals. Other factors (soil compaction and soil type), were not significantly related to reflectivity and did not significantly change the relationship between reflectivity and soil moisture contents. In addition, ground cover (rye crop) did not significantly reduce reflectivity. Therefore, this system could be used as a real-time and continuous nonintrusive soil moisture sensor for site-specific irrigation scheduling and watershed management

Global burden of 288 causes of death and life expectancy decomposition in 204 countries and territories and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

BACKGROUND Regular, detailed reporting on population health by underlying cause of death is fundamental for public health decision making. Cause-specific estimates of mortality and the subsequent effects on life expectancy worldwide are valuable metrics to gauge progress in reducing mortality rates. These estimates are particularly important following large-scale mortality spikes, such as the COVID-19 pandemic. When systematically analysed, mortality rates and life expectancy allow comparisons of the consequences of causes of death globally and over time, providing a nuanced understanding of the effect of these causes on global populations. METHODS The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 cause-of-death analysis estimated mortality and years of life lost (YLLs) from 288 causes of death by age-sex-location-year in 204 countries and territories and 811 subnational locations for each year from 1990 until 2021. The analysis used 56 604 data sources, including data from vital registration and verbal autopsy as well as surveys, censuses, surveillance systems, and cancer registries, among others. As with previous GBD rounds, cause-specific death rates for most causes were estimated using the Cause of Death Ensemble model-a modelling tool developed for GBD to assess the out-of-sample predictive validity of different statistical models and covariate permutations and combine those results to produce cause-specific mortality estimates-with alternative strategies adapted to model causes with insufficient data, substantial changes in reporting over the study period, or unusual epidemiology. YLLs were computed as the product of the number of deaths for each cause-age-sex-location-year and the standard life expectancy at each age. As part of the modelling process, uncertainty intervals (UIs) were generated using the 2·5th and 97·5th percentiles from a 1000-draw distribution for each metric. We decomposed life expectancy by cause of death, location, and year to show cause-specific effects on life expectancy from 1990 to 2021. We also used the coefficient of variation and the fraction of population affected by 90% of deaths to highlight concentrations of mortality. Findings are reported in counts and age-standardised rates. Methodological improvements for cause-of-death estimates in GBD 2021 include the expansion of under-5-years age group to include four new age groups, enhanced methods to account for stochastic variation of sparse data, and the inclusion of COVID-19 and other pandemic-related mortality-which includes excess mortality associated with the pandemic, excluding COVID-19, lower respiratory infections, measles, malaria, and pertussis. For this analysis, 199 new country-years of vital registration cause-of-death data, 5 country-years of surveillance data, 21 country-years of verbal autopsy data, and 94 country-years of other data types were added to those used in previous GBD rounds. FINDINGS The leading causes of age-standardised deaths globally were the same in 2019 as they were in 1990; in descending order, these were, ischaemic heart disease, stroke, chronic obstructive pulmonary disease, and lower respiratory infections. In 2021, however, COVID-19 replaced stroke as the second-leading age-standardised cause of death, with 94·0 deaths (95% UI 89·2-100·0) per 100 000 population. The COVID-19 pandemic shifted the rankings of the leading five causes, lowering stroke to the third-leading and chronic obstructive pulmonary disease to the fourth-leading position. In 2021, the highest age-standardised death rates from COVID-19 occurred in sub-Saharan Africa (271·0 deaths [250·1-290·7] per 100 000 population) and Latin America and the Caribbean (195·4 deaths [182·1-211·4] per 100 000 population). The lowest age-standardised death rates from COVID-19 were in the high-income super-region (48·1 deaths [47·4-48·8] per 100 000 population) and southeast Asia, east Asia, and Oceania (23·2 deaths [16·3-37·2] per 100 000 population). Globally, life expectancy steadily improved between 1990 and 2019 for 18 of the 22 investigated causes. Decomposition of global and regional life expectancy showed the positive effect that reductions in deaths from enteric infections, lower respiratory infections, stroke, and neonatal deaths, among others have contributed to improved survival over the study period. However, a net reduction of 1·6 years occurred in global life expectancy between 2019 and 2021, primarily due to increased death rates from COVID-19 and other pandemic-related mortality. Life expectancy was highly variable between super-regions over the study period, with southeast Asia, east Asia, and Oceania gaining 8·3 years (6·7-9·9) overall, while having the smallest reduction in life expectancy due to COVID-19 (0·4 years). The largest reduction in life expectancy due to COVID-19 occurred in Latin America and the Caribbean (3·6 years). Additionally, 53 of the 288 causes of death were highly concentrated in locations with less than 50% of the global population as of 2021, and these causes of death became progressively more concentrated since 1990, when only 44 causes showed this pattern. The concentration phenomenon is discussed heuristically with respect to enteric and lower respiratory infections, malaria, HIV/AIDS, neonatal disorders, tuberculosis, and measles. INTERPRETATION Long-standing gains in life expectancy and reductions in many of the leading causes of death have been disrupted by the COVID-19 pandemic, the adverse effects of which were spread unevenly among populations. Despite the pandemic, there has been continued progress in combatting several notable causes of death, leading to improved global life expectancy over the study period. Each of the seven GBD super-regions showed an overall improvement from 1990 and 2021, obscuring the negative effect in the years of the pandemic. Additionally, our findings regarding regional variation in causes of death driving increases in life expectancy hold clear policy utility. Analyses of shifting mortality trends reveal that several causes, once widespread globally, are now increasingly concentrated geographically. These changes in mortality concentration, alongside further investigation of changing risks, interventions, and relevant policy, present an important opportunity to deepen our understanding of mortality-reduction strategies. Examining patterns in mortality concentration might reveal areas where successful public health interventions have been implemented. Translating these successes to locations where certain causes of death remain entrenched can inform policies that work to improve life expectancy for people everywhere. FUNDING Bill & Melinda Gates Foundation