Predesign study for a modern 4-bladed rotor for the NASA rotor systems research aircraft

Trade-off study results and the rationale for the final selection of an existing modern four-bladed rotor system that can be adapted for installation on the Rotor Systems Research Aircraft (RSRA) are reported. The results of the detailed integration studies, parameter change studies, and instrumentation studies and the recommended plan for development and qualification of the rotor system is also given. Its parameter variants, integration on the RSRA, and support of ground and flight test programs are also discussed

Performance of an Earthdam and Cut-off Through Deep Alluvium

The main dam at the Bighorn development consists of a zoned earthfill embankment with a concrete cut-off wall constructed through the river alluvium by the slurry trench technique. Upon first filling of the reservoir in 1972, erratic drops in piezometric heads in the alluvium upstream of the cut-off and significant downstream leakage prompted the construction of a weight berm at the downstream toe and implementation of a program of regular monitoring of all piezometers and seepage measuring facilities. Concern for the integrity of the structure was not allayed until completion of a dam safety evaluation in 1984. The paper summarizes the design and construction aspects of the main dam and concrete cut-off, documents the results of monitoring records of seepage and piezometric heads since reservoir filling and assesses the extent of reservoir siltation. Records and inspections demonstrate satisfactory performance of the structure

Measurements of stratospheric odd nitrogen at Arrival Heights, Antarctica, in 1991

An FTIR spectrometer was installed at Arrival Heights, Antarctica (78 deg S, 167 deg E) in February 1991 to measure the evolution of stratospheric HNO3 during the year. In particular, it was the intention to make the first observations of HNO3 trends during autumn, concurrently with ongoing measurements of column NO2 made with a grating spectrometer. The time-series of NO2 in the Antarctic shows a rapid decline in the column amount during autumn, and a slow recovery in spring, as the photochemical conditions move the species to and from higher storage reservoirs. The new nitric acid data show for the first time that during autumn the vertical column increases from approximately 1.9 x 10(exp 16) molecule cm(exp -2) at day 30 to approximately 3.1 x 10(exp 16) molecule cm(exp -2) by day 100. When the sun returns in spring, it is found that the column amount has fallen to about half the value at the end of autumn. Spring amounts are variable, but as found in the data from previous years remain low inside the vortex. The autumn increase is attributed to the heterogeneous conversion of N2O5 to gas-phase HNO3 on background aerosols. Low nitric acid column amounts at the start of spring suggest that the HNO3 has moved from the gas to the condensed phase on polar stratospheric clouds with the advent of low temperatures during the polar night

Selecting hybrid pine clones for deployment - The pointy end of wood quality improvement

A clonal forestry research programme on Pinus elliottii Engelm. (slash pine) x P. caribaea Morelet var. hondurensis Barrett & Golfari (Caribbean pine) hybrids commenced in Queensland in 1986. Each cycle of clonal tests covered about 5 calendar years from field planting, and studies of wood quality variation have so far been used in selecting superior clones from the first three series of tests for commercial plantation deployment. Experience from the Series III clonal selection round is used to highlight the difficulties of ranking elite clones given a large number of growth, form, and wood property traits. Three to six ramets were felled from the best 32 clones in the Series III trials at age 6.8 years and a 3-m butt log from each was sawn into 70 × 35-mm structural boards. The clones sawn were ranked for routine deployment using data on growth, form, and wood traits. All recovered boards were assessed for distortion and tested for modulus of elasticity and modulus of rupture. Various non-destructive wood evaluation methods were used to estimate modulus of elasticity (wood stiffness) in these trees. Standing tree acoustic velocity assessed with an ST300 tool was slightly less strongly correlated phenotypically with the average modulus of elasticity of the recovered boards (r = 0.88**) than with predictions of modulus of elasticity from resonance vibration test samples and SilviScan estimates (both r = 0.89**). Moderate phenotypic relationships were found for individual tree means between average twist of the sawn boards and the average spiral grain angle of growth rings 2, 3, and 4 (r = 0.70**) assessed using a breast-height 12-mm increment core, and between average bow in the boards and average microfibril angle (r = 0.64**) from SilviScan assessments of core samples

Erratum: Temporal evolution of small-scale internetwork magnetic fields in the solar photosphere

While the longitudinal field that dominates photospheric network regions has been studied extensively, small scale transverse fields have recently been found to be ubiquitous in the quiet internetwork photosphere. Few observations have captured how this field evolves. We aim to statistically characterise the magnetic properties and observe the temporal evolution of small scale magnetic features. We present two high spatial/temporal resolution observations that reveal the dynamics of two disk centre internetwork regions taken by the new GRIS/IFU (GREGOR Infrared Spectrograph Integral Field Unit) with the highly magnetically sensitive Fe I line pair at 15648.52 {\AA} and 15652.87 {\AA}. With the SIR code, we consider two inversion schemes: scheme 1 (S1), where a magnetic atmosphere is embedded in a field free medium, and scheme 2 (S2), with two magnetic models and a fixed stray light component. S1 inversions returned a median magnetic field strength of 200 and 240 G for the two datasets, respectively. We consider the median transverse (horizontal) component, among pixels with Stokes Q or U, and the median unsigned longitudinal (vertical) component, among pixels with Stokes V, above a noise threshold. We determined the former to be 263 G and 267 G, and the latter to be 131 G and 145 G, for the two datasets, respectively. We present three regions of interest (ROIs), tracking the dynamics of small scale magnetic features. We apply S1 and S2 inversions to specific profiles, and find S2 produces better approximations when there is evidence of mixed polarities. We find patches of linear polarization with magnetic flux density between 130 and 150 G, appearing preferentially at granule/intergranular lane (IGL) boundaries. The weak hG magnetic field appears to be organised in terms of complex loop structures, with transverse fields often flanked by opposite polarity longitudinal fields.Comment: Accepted for publication in A&A, 22 pages, 17 figures. Abstract abridged for mailing list, full abstract included in PD

A general scaling relation for the critical current density in Nb3Sn

We review the scaling relations for the critical current density (Jc) in Nb3Sn wires and include recent findings on the variation of the upper critical field (Hc2) with temperature (T) and A15 composition. We highlight deficiencies in the Summers/Ekin relations, which are not able to account for the correct Jc(T) dependence. Available Jc(H) results indicate that the magnetic field dependence for all wires can be described with Kramer's flux shear model, if non-linearities in Kramer plots are attributed to A15 inhomogeneities. The strain (eps) dependence is introduced through a temperature and strain dependent Hc2*(T,eps) and Ginzburg- Landau parameter kappa1(T,eps) and a strain dependent critical temperature Tc(eps). This is more consistent than the usual Ekin unification, which uses two separate and different dependencies on Hc2*(T) and Hc2*(eps). Using a correct temperature dependence and accounting for the A15 inhomogeneities leads to a remarkable simple relation for Jc(H,T,eps). Finally, a new relation for s(eps) is proposed, based on the first, second and third strain invariants.Comment: Accepted Topical Review for Superconductor, Science and Technolog

ASSESSMENT OF PALATABILITY ATTRIBUTE OF Gluteaus Medius STEAKS (BEEF TOP SIRLOIN BUTT)

ABSTRACT: Beef top sirloin butts (n = 48

Cube law, condition factor and weight-length relationships: history, meta-analysis and recommendations

This study presents a historical review, a meta-analysis, and recommendations for users about weight–length relationships, condition factors and relative weight equations. The historical review traces the developments of the respective concepts. The meta-analysis explores 3929 weight–length relationships of the type W = aLb for 1773 species of fishes. It shows that 82% of the variance in a plot of log a over b can be explained by allometric versus isometric growth patterns and by different body shapes of the respective species. Across species median b = 3.03 is significantly larger than 3.0, thus indicating a tendency towards slightly positive-allometric growth (increase in relative body thickness or plumpness) in most fishes. The expected range of 2.5 < b < 3.5 is confirmed. Mean estimates of b outside this range are often based on only one or two weight–length relationships per species. However, true cases of strong allometric growth do exist and three examples are given. Within species, a plot of log a vs b can be used to detect outliers in weight–length relationships. An equation to calculate mean condition factors from weight–length relationships is given as Kmean = 100aLb−3. Relative weight Wrm = 100W/(amLbm) can be used for comparing the condition of individuals across populations, where am is the geometric mean of a and bm is the mean of b across all available weight–length relationships for a given species. Twelve recommendations for proper use and presentation of weight–length relationships, condition factors and relative weight are given