Design of composite columns based on Eurocode – comparison between general and simplified methods

[EN] In this paper, the results of a comprehensive parametric study for the member capacity of columns subjected to axial forces on the one hand and axial forces plus bending moments on the other hand are presented, considering all relevant types of composite sections: a) concrete encased sections, b) partially encased sections, c) concrete filled rectangular and circular tubes. Different steel grades and concrete strength classes are also considered. Firstly, the different methods of design in the Eurocode are briefly summed up: a) simplified method, based on buckling curves, for axial forces only, b) simplified method, based on a section verification with 2nd order moments, including equivalent geometric imperfections, c) a general method, based on geometrical and material nonlinear calculations with 3D-FEM-models. In the main part of the paper, the buckling resistance of the columns, based on these 3 methods, are compared, over the whole range of relative slenderness, for different section types, material strengths and type of loading (N, N + Mz, N + My). Also in the case of columns subjected to bending moments about the strong axis and axial forces, buckling about both axis is studied in detail.Unterweger, H.; Kettler, M. (2018). Design of composite columns based on Eurocode – comparison between general and simplified methods. En Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures. ASCCS 2018. Editorial Universitat Politècnica de València. 757-782. https://doi.org/10.4995/ASCCS2018.2018.7064OCS75778

1.9 W continuous-wave single transverse mode emission from 1060 nm edge-emitting lasers with vertically extended lasing area

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 105, 151105 (2014) and may be found at https://doi.org/10.1063/1.4898010.High-brightness edge-emitting semiconductor lasers having a vertically extended waveguide structure emitting in the 1060 nm range are investigated. Ridge waveguide (RW) lasers with 9 μm stripe width and 2.64 mm cavity length yield highest to date single transverse mode output power for RW lasers in the 1060 nm range. The lasers provide 1.9 W single transverse mode optical power under continuous-wave (cw) operation with narrow beam divergences of 9° in lateral and 14° (full width at half maximum) in vertical direction. The beam quality factor M2 is less than 1.9 up to 1.9 W optical power. A maximum brightness of 72 MWcm−2sr−1 is obtained. 100 μm wide and 3 mm long unpassivated broad area lasers provide more than 9 W optical power in cw operation.DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, Bauelement

Ultrahigh-brightness 850 nm GaAs/AlGaAs photonic crystal laser diodes

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 93, 221102 (2008) and may be found at https://doi.org/10.1063/1.3040322.One-dimensional photonic crystal lasers emitting in the 850 nm range show high internal quantum efficiencies of 93% and very narrow vertical beam divergence of 7.1° (full width at half maximum). 50m broad area lasers with unpassivated facets exhibit a high total output power of nearly 20 W in pulsed mode with a divergence of 9.5°×11.3° leading to a record brightness of 3×108Wcm−2sr−1, being presently the best value ever reported for a single broad area laser diode. 100m broad devices with unpassivated facets show continuous wave operation with an output power of 1.9 W.DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, Bauelement

Mutation Bias Favors Protein Folding Stability in the Evolution of Small Populations

Mutation bias in prokaryotes varies from extreme adenine and thymine (AT) in obligatory endosymbiotic or parasitic bacteria to extreme guanine and cytosine (GC), for instance in actinobacteria. GC mutation bias deeply influences the folding stability of proteins, making proteins on the average less hydrophobic and therefore less stable with respect to unfolding but also less susceptible to misfolding and aggregation. We study a model where proteins evolve subject to selection for folding stability under given mutation bias, population size, and neutrality. We find a non-neutral regime where, for any given population size, there is an optimal mutation bias that maximizes fitness. Interestingly, this optimal GC usage is small for small populations, large for intermediate populations and around 50% for large populations. This result is robust with respect to the definition of the fitness function and to the protein structures studied. Our model suggests that small populations evolving with small GC usage eventually accumulate a significant selective advantage over populations evolving without this bias. This provides a possible explanation to the observation that most species adopting obligatory intracellular lifestyles with a consequent reduction of effective population size shifted their mutation spectrum towards AT. The model also predicts that large GC usage is optimal for intermediate population size. To test these predictions we estimated the effective population sizes of bacterial species using the optimal codon usage coefficients computed by dos Reis et al. and the synonymous to non-synonymous substitution ratio computed by Daubin and Moran. We found that the population sizes estimated in these ways are significantly smaller for species with small and large GC usage compared to species with no bias, which supports our prediction